WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
2. Product Core Brief
- Model: YPP110A (3ASD573001A1)
- Brand: ABB
- Series: ABB Drive Systems / APC Application Controller
- Core Function: Processes drive control logic and signals
- Product Type: Digital Processor Module
- Key Specs: 24 V DC supply, high-speed processing for drive applications, compact board design
- Condition: New Original / New Surplus
- ⚠️ Obsolete Model – Limited Stock Available
3. Key Technical Specifications
- Part Number: 3ASD573001A1
- Supply Voltage: 24 V DC
- Power Consumption: Application-dependent (typically low, <20 W)
- Operating Temperature: 0 to +55 °C (standard industrial rating)
- Storage Temperature: -40 to +70 °C
- Dimensions (approx.): 330 × 230 × 37 mm (varies slightly by mounting)
- Weight: 0.9–1.0 kg
- Protection Class: IP20
- Mounting: Plug-in board for ABB drive racks / controllers
- Firmware: Legacy versions; verify compatibility with your drive model
- Communication: Drive-specific internal bus (not standalone Ethernet/Modbus in base unit)
- Battery Backup: Yes, for memory retention (check coin cell on arrival)
4. Product Introduction
The ABB YPP110A (3ASD573001A1) is a digital processor module used as the core application controller in ABB industrial drive systems, including ACS series and brushless excitation setups. It handles real-time control logic, signal processing, and drive coordination in heavy process environments like petrochemical plants, power generation, and manufacturing lines.
This board delivers reliable execution of drive-specific algorithms with fast scan times suited to motor control and excitation tasks. Field teams choose it for exact replacements in legacy systems because it matches original firmware behavior and connector layouts — avoiding rewiring or reprogramming headaches common with third-party substitutes.
- YPP110A
5. Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| No power LEDs / board dead | 24 V DC supply missing | ✅ High | Measure 24 V DC at input terminals with multimeter | Verify incoming power and fuses first; replace board only if voltage present but no LEDs |
| ERR / fault LED steady or flashing | Internal processor fault or firmware mismatch | ✅ High | Check drive diagnostic display or software buffer for error codes | High chance board issue; swap with known-good unit |
| Drive won’t enable / no response to commands | Processor not initializing | ✅ High | Confirm board seated properly; check ribbon cables to other modules | Reseat board; if still fails, replace YPP110A |
| Intermittent comms drop between drive sections | Loose connector or board aging | ✅ Medium | Inspect edge connectors for corrosion/pin damage | Clean contacts; replace if damage visible |
| Memory loss after power cycle | Backup battery dead | ✅ Medium | Check battery voltage (>3 V); look for date code | Replace coin cell battery; reload config if needed |
| No symptoms but drive trips randomly | External I/O or sensor issue | ❌ Low | Monitor adjacent I/O status lights and field wiring | Troubleshoot sensors/cabling before blaming processor |
If diagnostics point to the processor but you’re not sure, send photos of the board LEDs, error codes from the drive software, and serial number — we can help narrow it down.
6. Frequently Asked Questions (FAQ)
Is the ABB YPP110A hot-swappable? No. Power down the entire drive cabinet first. Pulling it live risks backplane damage or frying the board. Always isolate power and wait for capacitors to discharge.
What happens to my existing configuration when I swap this module? Parameters usually stay in non-volatile memory on other drive units (like the main control board). The YPP110A itself holds minimal persistent config, but take a full parameter backup via drive software before swap. Mirror any jumpers or settings visually.
Is this new or refurbished? Why is the price lower than OEM new? This listing is New Surplus — unused stock pulled from decommissioned or spare systems, original ABB packaging where available. It’s not factory-fresh production (obsolete part), but fully uninstalled and unpowered since manufacture. That’s why it’s priced lower than rare remaining OEM new-old-stock.
Will this work as a direct replacement in my ACS drive? Yes in most cases where the original was YPP110A/3ASD573001A1 — same revision and connectors. But firmware on the drive side must match; a major version jump can cause handshake errors. Pull your current firmware version before ordering.
How do you test these surplus units? We run each on a live ABB drive test stand: power-up sequence check, LED verification, internal comms ping, 24-hour burn-in under load, and insulation test (>10 MΩ at 500 V). Full test report with photos available on request. Boards ship in ESD bags with QC label.
Do you offer any warranty? Yes — 1-year functional warranty from ship date. Covers failure under normal use; does not cover mis-installation, ESD damage, or using mismatched firmware/revision.
Any common gotchas when installing? Firmware mismatch is the big one — seen drives throw persistent comms timeout faults just from a one-version jump. Photograph old board jumpers/DIP settings before removal. Ground yourself with ESD strap; these boards hate static. Don’t force connectors — pin alignment is tight.
