WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Product Model: GE IC670PBI001-EG
Product Brand: GE Fanuc / General Electric / Emerson
Product Series: Field Control Profibus Interface
Product Features:
• Profibus DP bus interface unit enabling distributed I/O communications in GE Field Control systems, supporting up to eight I/O modules per node.
• Operates on standard industrial 24 VDC (18–30 V) with DIP switch configurable address settings and robust connectivity.
• Two 9-pin D-sub connectors: one for Profibus DP network and one for Hand-Held Programmer (HHP) access.
• Supports common Profibus speeds from 9.6 kbps up to 12 Mbps and simple daisy-chain or linear bus topology.
Technical Specifications Table
| Specification | Detail |
|---|---|
| Model | GE IC670PBI001-EG |
| Product Type | Profibus DP Bus Interface Unit |
| Series | GE Field Control |
| Nominal Supply Voltage | 24 VDC (18–30 VDC) |
| Supported Protocol | Profibus DP (DP-V0, typical) |
| Communication Ports | 1× Profibus DP (9-pin D-sub), 1× HHP port (9-pin) |
| Network Speeds | 9.6 kbps – 12 Mbps |
| Addressing | DIP switch configurable (0–32) |
| Max I/O Modules per Node | Up to 8 |
| Mounting | Terminal block / DIN rail |
| Indicators | PWR, RUN, OK LEDs |
| Operating Temp | 0 °C – 55 °C (approx.) |
| Weight | ~0.27 kg (estimated) |
| Status | Discontinued but widely available via aftermarket |
- IC670PBI001-EG
Applications & Industry Context
The GE IC670PBI001-EG is a field-control Profibus bus interface unit built to integrate GE Fanuc Field I/O modules into modern distributed automation networks using the Profibus DP protocol. In many industrial automation systems — such as manufacturing lines, process plants, and utility control stations — distributed I/O networks are essential. They allow multiple remote I/O nodes to communicate with central PLCs or controllers efficiently, minimizing extensive wiring, separating noisy field environments from control logic, and improving modular scalability.
Profibus, a widely adopted industrial fieldbus standard, supports robust multi-drop communications with deterministic timing. The IC670PBI001-EG connects Field I/O modules — typically base I/O blocks and remote I/O racks — to a Profibus network, effectively acting as a gateway between field signals and higher-level automation systems. This capability is particularly valuable in facilities that have legacy GE hardware but need to extend functionality or integrate with distributed control architectures.
In legacy automation setups — for example GE Speedtronic or Field Control systems — discrete I/O, analog modules, and logic controllers coexist with communication interfaces such as Profibus. By deploying the IC670PBI001-EG, engineers can extend existing GE I/O networks with Profibus connectivity, enabling seamless data exchanges between I/O stations and Profibus-enabled masters (PLCs, DCS controllers, or SCADA gateways). This positions the unit as a key enabler in modernizing older networks without requiring wholesale replacement of installed field modules.
