WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Many products have not yet been launched, please contact us for more product information.
We have 16 shared warehouses worldwide, so please understand that sometimes it may take several hours to accurately respond to you. Of course, we will reply to your question as soon as possible.
Product Model: GE IC693MDL732E
Product Brand: GE Fanuc / General Electric
Product Series: Series 90-30
Product Features:
• 8-point positive logic DC output module for Series 90-30 PLCs (12/24 VDC)
• Outputs up to 0.5 A per channel with common power terminal
• Green LED status indicators for clear on/off feedback
• Widely used surplus part with strong field compatibility
Technical Specifications Table
| Specification | Detail |
|---|---|
| Model | GE IC693MDL732E |
| Series | Series 90-30 |
| Module Type | DC Discrete Output Module |
| Logic Type | Positive Logic (sourcing) |
| Rated Supply | 12–24 VDC |
| Output Points | 8 points per group |
| Max Output per Point | 0.5 A |
| Max Output per Common | 2 A |
| Inrush Current | 4.78 A (10 ms) |
| Output Voltage Drop | ≤1 V |
| Off-State Leakage | ≤1 mA |
| Response Time | ≤2 ms on/off |
| LED Indicators | Yes — per output |
- IC693MDL732E
Technical Features & Benefits
The GE IC693MDL732E shines for engineers who need a dependable, straightforward digital output interface for field control. Rated for 12–24 VDC operation, it is well-suited to plant busses that are already supplying 24 V control power — a standard voltage level across industrial automation. Each of the 8 output points can supply up to 0.5 A, which is adequate for many solenoids, pilot lights, and similar loads. The shared common power terminal simplifies the power distribution scheme for grouped outputs.
The outputs have distinct performance characteristics that matter in practice. Peak currents can surge up to about 4.78 A for very short durations (10 ms), allowing the outputs to accommodate inductive load inrush without immediately tripping. The electrical isolation between the module’s logic backplane and the field outputs improves noise immunity and reduces the risk of replication faults due to ground shifts or electrical transients.
Engineers appreciate that each output channel is paired with a green LED indicator on the module’s faceplate. These LEDs provide live status feedback — invaluable during commissioning or troubleshooting. With a glance, a technician can identify which channels are active and which are not before moving on to deeper diagnostic steps.
From a system perspective, the design philosophy emphasizes simplicity and robustness. There are no built-in fuses or complicated thermal protections, which reduces points of failure. The module’s logic and hardware are designed for longevity and for rapid hot-swap replacement in the event of field service. That said, because the GE IC693MDL732E is part of a discontinued line, newer PLC systems may require different I/O modules with more advanced diagnostics or communication features if you are designing a new system.
