WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
When sprawling solar farms need to coordinate inverter strings across dusty fields without running miles of copper that corrode under weather swings, control engineers rack high-speed CPUs at central substations to crunch string performance data and issue curtail commands over Ethernet. Battery energy storage systems in grid tie-ins demand split-second logic scans to balance charge cycles and black-start sequences, where a sluggish processor could cascade into cell damage or blackout delays. The GE IC695CPE305-ABAD meets these needs as a 1.1 GHz PACSystems RX3i CPU module from GE Fanuc/Emerson, powering complex industrial automation tasks in control systems that scale from single racks to enterprise-wide domains.
Wind turbine SCADA nodes use the GE IC695CPE305-ABAD to fuse yaw, pitch, and vibration telemetry into predictive maintenance models, offloading HMIs while holding 512 program blocks for custom turbine curves. Water districts managing canal gates deploy it in remote PAC racks, polling flow meters and driving actuators via Modbus TCP without VPN hassles—ideal where cell coverage drops. In semiconductor fabs, it orchestrates wafer fab tools under cleanroom constraints, supporting OPC UA for MES handshakes that track lot yields in real time. These environments spotlight the GE IC695CPE305-ABAD addressing scan rates under 1 ms/K per 1000 Booleans, with 5MB RAM/5MB flash holding ladder, structured text, or C blocks for motion, safety, and data logging in one footprint.
Pharma cleanrooms lean on its battery-less user memory for recipe validation, retaining state through blips without lithium swaps. By embedding Ethernet alongside RS232/RS485 serial, the GE IC695CPE305-ABAD cuts gateway clutter, letting integrators wire one box for Proficy Machine Edition programming, third-party drives, and peer PACs alike—proven in setups demanding firmware rev 7.15+ for PSM001 power sync modules.
The GE IC695CPE305-ABAD stands as a high-performance single-slot CPU for Emerson’s PACSystems RX3i platform, executing control programs across up to 8 local racks with dual backplanes for I/O, motion, and smart modules. It mounts universally in any rack slot except slot 0, sipping regulated power while broadcasting scans at 0.72 ms per 1000 Boolean instructions via its 1.1 GHz core. This embeds the GE IC695CPE305-ABAD as the logic engine for high-availability systems, blending PAC flexibility with PLC determinism.
Data flows through one 10/100 Ethernet port for EGD/SRTP messaging, a USB 2.0 master for config swaps, and dual serial channels handling Modbus RTU, SNP, or printer protocols—perfect for bridging legacy drops. User memory splits 5MB SRAM (battery-free via capacitor) and 5MB flash for retentive data, supporting 32K discrete I/O points and 32K analog words natively. Front LEDs flag OK, RUN, CM (constant memory), and faults, with a mode switch toggling STOP/RUN/STOP-FS for safe field tweaks.
Integrators bank on the GE IC695CPE305-ABAD for redundancy switchover in 3 ms, OPC UA client/server for IIoT, and floating-point math that nails PID loops without coprocessors. Firmware ABAD adds PSM001 drive sync and security hardening, easing upgrades from 90-30 CPUs while keeping RX3i I/O untouched. Rugged for panels, it fits energy packs for ride-through, suiting plants where power glitches can’t halt lines.
Commissioning teams pick the GE IC695CPE305-ABAD for its predictable throughput—512 blocks up to 128 KB each compile fast in Proficy, scanning complex interlocks without overrun even at 10K words/sec data table moves. Ethernet auto-negotiates MDI/X, holding multicast EGD under 2 ms latency across 256 producers, critical for coordinated drive starts. Serial ports daisy-chain via SNPX for handheld diagnostics, and USB dumps trends sans Ethernet if firewalled.
Physically, the GE IC695CPE305-ABAD claims one slot with extractor tabs for hot-swap confidence, drawing 1A each at 3.3V/5V (up to 1.5A USB peaks) and 0.1A at 24V runtime—cool at 60°C max under rack flow. Conformal coat blocks humidity, and EMC grounds shield VFD noise for clean TCP/IP. Time-of-day clock drifts just 2 sec/day, with 0.01% elapsed timers locking batch proofs.
Redundancy pairs shine: PRP media independence syncs states in one scan, and no single failure drops I/O thanks to backplane isolation. The GE IC695CPE305-ABAD embraces RX3i universality—mix VersaMax NIUs or high-res motion axes—while firmware guards against unauthorized loads, fitting regulated sectors without custom hardening
Detailed Technical Specifications
| Parameter | Value |
|---|---|
| Model | GE IC695CPE305-ABAD |
| Brand | GE Fanuc/Emerson (PACSystems RX3i) |
| Product Type | High-Performance CPU Module |
| Processor Speed | 1.1 GHz |
| User Memory | 5 MB SRAM (Battery-less), 5 MB Flash |
| Scan Rate | 0.72 ms per 1000 Boolean Instructions |
| Program Blocks | 512 (Max 128 KB per Block) |
| Ethernet Ports | 1 x 10/100 Mbps (EGD, SRTP, OPC UA) |
| Serial Ports | 2 (RS-232/RS-485: Modbus RTU, SNP, Serial I/O) |
| USB Port | 1 x USB 2.0 Master |
| Power Consumption | 3.3V: 1A; 5V: 1-1.5A; 24V: 0.1A Runtime |
| Operating Temperature | 0 to 60 Degrees Celsius |
| Racks Supported | Up to 8 Local (512 I/O Modules Max) |
| Dimensions | 90 mm W x 60 mm H x 42 mm D (Single Slot) |
| Weight | 0.3 kg |
| Mounting | Universal Rack Slot (Not Slot 0) |
| Redundancy Switchover | ≤1 Logic Scan (Min 3.133 ms) |
| Certifications | UL 508, CSA, CE |
| Cooling | Rack Convection |
- IC695CPE305-ABAD
Related Modules or Compatible Units
IC695PSA040 – Universal power supply pairing with the GE IC695CPE305-ABAD for rack-wide 3.3/5/24V stability.
IC695ACC302 – Lithium energy pack that mounts beside the GE IC695CPE305-ABAD for memory ride-through on outages.
IC694ALG391 – Analog combo module racked downstream of the GE IC695CPE305-ABAD for field process loops.
IC695NIU001 – Ethernet NIU for remote drops managed by the GE IC695CPE305-ABAD via EGDIO.
IC695CPU315 – Redundant sibling CPU that hot-swaps with the GE IC695CPE305-ABAD in HA pairs.
IC694PSM001 – Power sync module natively supported by GE IC695CPE305-ABAD firmware for drive phasing.
Snap the GE IC695CPE305-ABAD into cleared slots after PSU settles rails—meter 5V >4.75V steady, then align extractors and press till latched. Daisy serial to programmer first for firmware ping, cable Ethernet thru managed switches with VLAN tags, and strap energy pack left for capacitor charge before live. Cycle mode to RUN post-download, confirming CM LED solid sans faults.
Trim uptime by pinging EGD weekly from Proficy, archiving fault buffers monthly to spot scan creep. Reseat USB yearly if loaded heavy, and update firmware via SD during shutdowns—ABAD adds PSM without config wipes. Panel filters guard heatsinks, keeping thermal margin for overload peaks.
