WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
In high-speed packaging lines where synchronized flying shears slice film at 1000 ft/min without skew or waste, or in CNC machining centers profiling aluminum dies with sub-micron repeatability amid coolant mists and chip storms, the GE IC695PMM335-AE orchestrates servo axes into seamless harmony. Machine builders embed it in wind tunnel test rigs timing flap actuators to airflow pulses, or in solar panel assemblers aligning cells via gantry pick-and-place under laser vision—jobs where motion lag invites scrap piles and deadline slips. Used in industrial automation for multi-axis control systems, this PACMotion module from GE Fanuc’s RX3i PACSystems lineup tames complexity like cam mismatches, torque ripples, and encoder noise that derail precision tasks.
Printer OEMs tap the GE IC695PMM335-AE for web tensioning across four rollers plus a virtual master, blending gearing with electronic cams to dodge web breaks, while robotics firms sync arm joints over fiber for collision-free paths in tight cells. Applicable in PLC-integrated motion architectures, it drives four physical axes at 500µs position loops, scaling to 40 axes rack-wide via FSSB at 50 Mb/s. In battery gigafactories or textile winders, high-speed inputs capture home probes dead-on, and 256 onboard cam profiles swap live for recipe shifts. Backplane-native for RX3i, the GE IC695PMM335-AE melds torque-mode finesse with PLCopen blocks, letting programmers blend motion into ladder logic without silos.
Product Introduction & Positioning
The GE IC695PMM335-AE is a PACMotion multi-axis servo controller module slotted into GE Vernova’s PACSystems RX3i racks, commanding up to four physical axes plus virtual/time-based extras through integrated FANUC Serial Servo Bus (FSSB) fiber optics. It mates with RX3i CPUs like the IC695CPU315, offloading motion math to sustain PLC scans while sharing diagnostics via reference data. In control hierarchies, it anchors the servo layer, piping commands to FANUC αi/βi drives and capturing feedback from incremental/absolute encoders for closed-loop torque, velocity, or position regimes.
Integrators lean on the GE IC695PMM335-AE for its rack synergy—Proficy Machine Edition configures paths, blending, and buffering in one tool, with interrupts down to 2ms for event-driven halts. Engineers value the single-slot footprint enabling 40-axis beasts in 16-slot frames, complete with faceplate I/O for limits, probes, and markers. Far from a standalone box, the GE IC695PMM335-AE embeds motion as native PLC muscle, ideal for retrofits demanding sync without rewiring plants.
Key Technical Features & Functional Benefits
Machinists bank on the GE IC695PMM335-AE for razor-sharp loops: 62.5µs torque, 125µs velocity, 500µs position—all rack-wide simultaneous—fusing jerk-limited profiles for buttery ramps sans vibration. PLCopen function blocks handle gearing, camming (256 profiles/module, 2048 system-wide), and synch/delayed starts across eight axes, with dynamic swaps mid-run for format changes.
Tough fiber I/O shrugs off 400m runs at 50 Mb/s, with 100m node hops and optional FTB blocks for field ties. Faceplate gear packs four 24V inputs, two high-speed probes per axis, and dual config I/O for homes/overtravels—optically isolated against weld noise. At 1.1A/3.3V and 0.45A/5V, it runs cool in dense PCI racks from 0-60°C.
Diagnostics dominate: three interrupts (time or event), double-precision floats, and real-time faceplates spotlight faults, cutting debug from hours to scans. Hot-swap and firmware flashes via backplane lock in longevity for 24/7 cutters or winders.
- IC695PMM335-AE
Detailed Technical Specifications
| Parameter | Value |
|---|---|
| Model | GE IC695PMM335-AE |
| Brand | GE Fanuc (PACSystems RX3i) |
| Type | Multi-Axis Motion Controller |
| Power Supply | 3.3 VDC (1.1 A), 5 VDC (0.45 A) |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Mounting | RX3i Universal Backplane (1 slot) |
| Dimensions | 3.5 x 13 x 13.5 cm |
| Weight | 0.3 kg |
| Interfaces | FSSB Fiber Optic (50 Mb/s); 4x 24V inputs, 2x high-speed inputs |
| Certifications | CE, UL, CUL |
| Cooling | Natural convection |
| Environmental Rating | Pollution Degree 2, 5-95% RH |
Related Modules or Compatible Units
IC695CPU315 – RX3i host CPU, orchestrates GE IC695PMM335-AE motion blocks.
IC695FTB1B132 – Fiber I/O terminal block, field-ends FSSB for servo wiring.
IC695HSC108 – High-speed counter, supplements axis feedback.
IC695ALG600 – Analog I/O for blended motion/process loops.
αi-HVi Series Drives – FANUC servos, native FSSB mates at 1M counts/rev.
IC695ACC310 – Battery kit, backs absolute encoder memory.
IC695NIU001 – Ethernet NIU for supervisory motion trending.
Installation Notes & Maintenance Best Practices
Plan GE IC695PMM335-AE slots post-CPU in RX3i racks—align fiber cleanings pre-connect, limiting stubs to 3m and terminators at ends; torque DB connectors to spec with shielded 24V runs. Proficy baselines cams/probes offline, verifying loop rates before drive power-up; in vibration bays, secure FTBs with locknuts.
Monthly LED scans and interrupt logs catch probe drifts—clean fiber ferrules quarterly with kits, trend torque ripples for belt wears. Firmware via Machine Edition preps recipe vaults; hot-swaps with matching configs drop outages to seconds, sustaining 99.99% in high-cycle webs.
