WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
2. Product Core Brief
- Model: GE IC752DPA062A
- Brand: GE Fanuc / Emerson Automation
- Series: IC752 DataPanel HMI
- Core Function: Process control operator interface display
- Product Type: Human-Machine Interface (HMI) Panel
- Key Specs: ~10.5″ color display; touchscreen/operator panel
- Condition: New Original / New Surplus / Refurbished
3. Key Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | IC752DPA062A |
| Manufacturer | GE Fanuc (Emerson Automation) |
| Family | IC752 DataPanel Operator Interface |
| Display Size | ~10.5 in (diagonal) touchscreen |
| Display Type | Color TFT LCD |
| Resolution | Standard industrial VGA equivalent (exact res verify with OEM datasheet) |
| Touch/Input | Integrated operator touch keys/overlay |
| Interface | Serial or parallel port to PLC (depends on specific harness) |
| Operating Voltage | Typically 24 VDC (confirm OEM manual) |
| Mounting | Front panel mount |
| Operating Temp | Industrial grade (confirm exact range via OEM) |
| Condition Notes | Discontinued/legacy HMI from GE Fanuc |
Context: This item is an industrial process control datapanel / operator interface originally used with GE Fanuc control systems; exact connectivity and pinouts vary by application and harness configuration.
4. Product Introduction
The GE IC752DPA062A is an operator interface / datapanel display panel from the GE Fanuc IC752 HMI family, designed to deliver a ~10.5-inch color touchscreen for machine operators in process and factory automation. These panels were commonly used to visualize control data and interact with PLC systems using built-in touch or keypad controls.
This panel provides an industrial-grade human-machine interface for status, alarms, and operator control inputs. It integrates with legacy GE automation systems via industry standard communication ports. Because the part is discontinued by the OEM, surplus and tested refurbished units are the primary source for replacement or spare stocking.
5. Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance | Quick Check | Recommendation |
|---|---|---|---|---|
| Display won’t power on | No 24 VDC supply | ✅ High | Verify 24 V at panel power pins | Confirm correct power; inspect fuses |
| No image but backlight on | Ribbon or connector fault | ⚠️ Medium | Check display connector continuity | Reseat connectors; inspect ribbon |
| Touch input not responsive | Calibration or panel failure | ⚠️ Medium | Calibrate via service menu if accessible | Test with known good panel |
| Incorrect characters or garbled text | Communication baud mismatch | ⚠️ Medium | Confirm comm settings from PLC side | Align baud/parity with host |
| PLC data not updating on panel | PLC comm/link issue | ❌ Low | Check host PLC diagnostic link flags | Debug host comm bus before panel |
Note: Operator panels like this rarely fail electrically; most faults track back to power supply, harness continuity, or host communication configuration. Provide photos of cable terminations and connector pinouts if you contact support.
- IC752DPA062A
6. Frequently Asked Questions (FAQ)
Q1: What is this panel used for?
A: This is a process control operator interface (DataPanel) used with GE controls to visualize PLC status and accept operator input. It’s often front-mounted on cabinets.
Q2: What display size does IC752DPA062A have?
A: It’s approximately a 10.5-inch color display panel with touchscreen/keys for operator interaction.
Q3: What systems did this interface panel work with?
A: It interfaces with legacy GE Fanuc control systems via serial or other communications — exact wiring depends on system harness. It is not a standalone PLC.
Q4: Is this part still manufactured?
A: No — this model is discontinued by the manufacturer and only available as surplus or refurbished stock.
Q5: Why is this cheaper than new OEM pricing?
A: Because GE Fanuc no longer makes this part, current inventory is New Surplus or Refurbished Tested, not new current production.
Q6: How do I confirm compatibility with my controller?
A: Check the operator interface protocol and harness pinout against your specific machine control PCB wiring; mismatches in baud rates or comm pins are the most common integration issue.
