WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Product Model: IC693MDL940F
Product Brand: GE Fanuc / GE Intelligent Platforms (Emerson)
Product Series: Series 90-30 PLC Output Modules
Product Features:
• 16-point relay output module capable of switching AC/DC loads based on PLC logic.
• 2 A per channel rating with up to 4 A per common group support.
• Wide operating range: 5–30 VDC or 5–250 VAC for flexible field applications.
• Built-in LED status indicators per channel for troubleshooting and diagnostics
Technical Specifications
| Specification | Detail |
|---|---|
| Model Number | IC693MDL940F |
| Series | GE Fanuc Series 90-30 PLC |
| Module Type | Relay Output Module |
| Number of Outputs | 16 channels |
| Output Type | Electromechanical relay (Normally Open) |
| Rated Voltage | 24 VDC, 120/240 VAC (nominal) |
| Operating Voltage Range | 5–30 VDC, 5–250 VAC, 50/60 Hz |
| Current Rating per Channel | 2 A pilot duty |
| Current Rating per Common Group | 4 A |
| Maximum Inrush Current | 5 A |
| Minimum Load | 10 mA |
| Isolation (Field to Logic) | ~1500 V |
| Group Isolation | ~500 V |
| Response Time (On/Off) | ~15 ms |
| Status Indicators | LED for each output channel |
| Mounting | Single slot in 90-30 rack |
| Compatible Systems | GE Series 90-30 and compatible racks/CPU systems |
- IC693MDL940F
Product Role & System Fit
The IC693MDL940F does not make decisions — that’s the job of the PLC CPU. Instead, it plays an actuator-switching role by mapping PLC logic outputs to physical devices in the field. It plugs into an available slot in a Series 90-30 baseplate and communicates with the PLC processor over the backplane bus.
When the PLC program drives an output bit high, that command is sent over the backplane to the MDL940F’s corresponding relay output. The relay then energizes, completing the circuit to the field device (such as a motor starter coil or indicator lamp). Each of the 16 channels can be used independently, organized in four groups of four outputs for easier wiring and common power sharing.
This module’s design supports both 24 VDC logic circuits and AC power switching, allowing integration into mixed-voltage control panels without the need for external relays or contactors for small to medium loads. Its mechanical relay contacts help maintain full electrical isolation from the PLC logic electronics, reducing risk of ground loops and voltage interference.
