WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Product Model: IC695ETM001-EH
Product Brand: GE Fanuc (Emerson Automation)
Product Series: PACSystems RX3i Communication Interfaces
Product Features:
• Ethernet interface module with dual 10/100 Mbps autosensing ports for PLC connectivity
• Integrated TCP/IP, Modbus TCP, and Ethernet Global Data (EGD) support
• Serial port and embedded switch capability for versatile network topologies
• Hot-swappable design eases maintenance without system shutdown
Technical Specifications
| Specification | Details |
|---|---|
| Model | IC695ETM001-EH |
| Product Type | Ethernet Interface Module |
| Series | GE Fanuc PACSystems RX3i |
| Ethernet Ports | 2 × 10/100 Mbps auto-sensing RJ-45 |
| Embedded Switch | Yes — allows daisy-chaining |
| Processor Speed | 200 MHz |
| Protocols Supported | TCP/IP, Modbus TCP, SRTP, EGD |
| Serial Port | RS-232 Station Manager (9-pin D-connector) |
| Hot-Swappable | Yes (firmware dependent) |
| Status LEDs | Link, activity, speed indicators |
| Power | Provided from RX3i backplane |
| Operating Temp. | 0 °C – 60 °C typical |
| Mounting | Fits into RX3i backplane module slot |
- IC695ETM001-EH
Product Role & System Fit
In modern industrial automation, connectivity is just as crucial as deterministic logic execution. The IC695ETM001-EH is an Ethernet interface module designed for the GE Fanuc PACSystems RX3i programmable logic controller (PLC) platform, enabling high-speed network communication between controllers, supervisory systems, and Ethernet-capable devices.
Unlike I/O cards that handle discrete or analog signals, the IC695ETM001-EH serves as the network bridge that links an RX3i system to plant-wide Ethernet infrastructures. By installing this module in an empty slot of the RX3i backplane, engineers can leverage standard TCP/IP-based communications — including Modbus TCP, Service Request Transport Protocol (SRTP), and Ethernet Global Data (EGD) — to exchange data with other PLCs, SCADA hosts, HMIs, and enterprise systems.
This connectivity capability is essential in distributed control environments where data flows across layers — from local PLC logic to higher-level visualization and analytics platforms. The module’s two auto-sensing Ethernet ports provide flexible network topology options, supporting simple point-to-point links, redundant paths, or daisy-chained segments using embedded switch features.
Beyond raw data exchange, the IC695ETM001-EH enhances system integration by offering a built-in serial RS-232 Station Manager port. This allows technicians to access supervisory functions, monitor module health, and configure network settings directly — a practical advantage during commissioning and maintenance.
Whether used to connect RX3i PLCs to an existing plant Ethernet network or to facilitate communication with legacy systems like Series 90 and VersaMax controllers, the IC695ETM001-EH stands at the core of your networked automation architecture.
