Sale!

GE VME-7700RC Industrial VME Single Board

  • Model: GE VME-7700RC (VMIVME-7700RC)
  • Brand: GE Fanuc / Abaco Systems (legacy)
  • Series: VMEbus Embedded SBC
  • Core Function: VME single board computer (embedded controller)
  • Product Type: VME SBC (Single Board Computer)
  • Key Specs: Intel Ultra Low Voltage Celeron (400–650 MHz); up to 512 MB SDRAM; CompactFlash storage; Ethernet ports
  • Condition: New Original / New Surplus (legacy embedded)
Categories: , , , , Brand:

Description

2. Product Core Brief

  • Model: GE VME-7700RC (VMIVME-7700RC)
  • Brand: GE Fanuc / Abaco Systems (legacy)
  • Series: VMEbus Embedded SBC
  • Core Function: VME single board computer (embedded controller)
  • Product Type: VME SBC (Single Board Computer)
  • Key Specs: Intel Ultra Low Voltage Celeron (400–650 MHz); up to 512 MB SDRAM; CompactFlash storage; Ethernet ports
  • Condition: New Original / New Surplus (legacy embedded)

3. Key Technical Specifications

Parameter Value
Part Number VME-7700RC (VMIVME-7700RC)
Manufacturer GE Fanuc / Abaco Systems
Product Type VMEbus Single Board Computer (SBC)
Form Factor 6U VME (single slot)
Processor Intel Ultra Low Voltage Celeron (400 MHz / 650 MHz options)
Cache ~256 KB on-die L2
Memory (SDRAM) Up to 512 MB PC-100
Storage Up to 1 GB CompactFlash (optional)
Bus Interface Tundra Universe II VME64 interface
Ethernet 2× 10/100 Mbps RJ45
USB Ports 2× USB front panel
Serial Interfaces 2× 16550-compatible serial ports
PMC Expansion 1× PMC (IEEE-1386.1) site
Backplane Support A32/A24/D32/D08(EO)/MBLT64/BLT32
Operating Temp 0 °C to +70 °C
Ruggedization Commercial embedded environments
Typical Uses Embedded VME control, process automation, legacy system support
GE VMIVME-7750 VMIVME-7750-746001 350-027750-746001 P
VME-7700RC

4. Product Introduction

The GE VME-7700RC (also referenced as VMIVME-7700RC) is a 6U VMEbus single board computer (SBC) designed for embedded industrial systems that require reliable processing, flexible I/O, and network connectivity. It’s based on an Intel ultra low voltage Celeron processor (400 MHz or 650 MHz) with up to 512 MB of SDRAM, optional 1 GB CompactFlash storage, and dual front-panel Ethernet ports for networked operation.

This SBC integrates a robust VMEbus interface using the Tundra Universe II bridge, a PMC expansion site for additional I/O, and multiple serial/USB ports for field device integration. It is widely deployed in embedded control, test systems, process automation, and legacy VME applications where sustained performance and field-deployable designs are critical.

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
Board won’t boot or stay powered No backplane power / wrong VME slot ✅ High Verify VME rack 5 V, ±12 V with DC meter Confirm backplane voltages and slot alignment
No BIOS output serial/console Incorrect console settings / no connection ⚠️ Medium Connect RS-232 to PC at correct baud Confirm BIOS settings; try PS/2 keyboard if available
Ethernet LAN not active Cable or switch mismatch ⚠️ Medium Check link LED on RJ45 Use known good cable and link test
PMC site unresponsive Unsupported PMC card ⚠️ Medium Remove/replace PMC card Use compatible PMC mezzanine per spec
System crashes under load Thermal or power issue ⚠️ Medium Check chassis airflow & heat sink seat Ensure forced cooling and proper seating

Note: Most SBC faults trace back to rack power issues, backplane misalignment, or peripheral configuration. Verify rack voltages and connectors before suspecting the SBC itself.

6. Frequently Asked Questions (FAQ)

Q1: What exactly is the GE VME-7700RC?
A: It’s a 6U VMEbus single board computer with an Intel ultra low voltage Celeron CPU, dual Ethernet, PMC expansion, and VMEbus interface — used for industrial embedded control or legacy rack systems.

Q2: What environments is this board designed for?
A: It’s intended for embedded and industrial systems where a rugged, low-power SBC is needed in a VME chassis — ranging from automated test rigs to process control frameworks.

Q3: What operating systems can it support?
A: Typical OS support includes VxWorks, QNX, Linux, and legacy RTOS environments on embedded boards. Booting from Ethernet or CompactFlash is common in field deployments.

Q4: Is this module still manufactured?
A: No — it’s a legacy VME SBC originally from GE Fanuc embedded systems and later under Abaco Systems; current supply is mainly new surplus or refurbished stock.

Q5: Why might a system integrator choose this board?
A: For fielded VME installations and legacy support, this SBC provides standard VMEbus services, PCI/PMC extension, network connectivity, and embedded extenders.

Q6: Is there firmware/BIOS support available?
A: Legacy BIOS and boot firmware are stored in reprogrammable memory — confirm version and settings before commissioning. Testing in a lab setup with console access is recommended.