Sale!

ABB CI854AK01 3BSE030220R1 PROFIBUS-DP/V1 Communication Interface Kit

The ABB CI854AK01 (catalog part number 3BSE030220R1) is a PROFIBUS-DP/V1 master communication interface kit engineered for the ABB System 800xA and AC 800M process controller hardware platforms. The complete kit includes the CI854 communication interface module along with its dedicated TP854 baseplate assembly. Designed to attach to the controller’s CEX-Bus (Communication Expansion Bus), the module enables high-speed fieldbus connectivity between AC 800M processors and distributed PROFIBUS slave devices, intelligent field instruments, drive systems, and I/O sub-assemblies.

Categories: , , , , SKU: CI854AK01 3BSE030220R1 Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The ABB CI854AK01 (catalog part number 3BSE030220R1) is a PROFIBUS-DP/V1 master communication interface kit engineered for the ABB System 800xA and AC 800M process controller hardware platforms. The complete kit includes the CI854 communication interface module along with its dedicated TP854 baseplate assembly. Designed to attach to the controller’s CEX-Bus (Communication Expansion Bus), the module enables high-speed fieldbus connectivity between AC 800M processors and distributed PROFIBUS slave devices, intelligent field instruments, drive systems, and I/O sub-assemblies.

Featuring dual PROFIBUS ports, the CI854AK01 supports high-speed cyclic data exchange (up to 12 Mbit/s) alongside acyclic DP-V1 master-slave parameterization and diagnostic communication. The module supports master-level line redundancy configurations to protect process networks against single cable breaks. Designed for fieldbus integration, the assembly mounts onto standard 35 mm DIN rails via the included TP854 baseplate, facilitating hot-swappable module replacement during system operation.

 

Key Technical Specifications

Parameter Specification / Value
Product Type PROFIBUS-DP/V1 Communication Interface Kit (Module + Baseplate)
ABB Ordering Catalog Number 3BSE030220R1
ABB Type Designation CI854AK01
Kit Components Included CI854 Communication Module + TP854 Baseplate (3BSE025349R1)
Protocol Support PROFIBUS-DP (EN 50170) and PROFIBUS-DP/V1 (Acyclic Master Class 1 & 2)
Bus Baud Rate 9.6 kbit/s up to 12 Mbit/s (auto-detection supported)
System Expansion Bus CEX-Bus (Communication Expansion Bus for AC 800M)
Network Channels / Ports 2 × PROFIBUS-DP master channels (RS-485 via 9-pin D-sub connectors)
Redundancy Modes Supports PROFIBUS-DP line redundancy and CEX-Bus interface redundancy
Module Hot Swap Hot-swappable (module replacement on energized TP854 baseplate)
Dimensions (W × H × D) 59 mm × 186 mm × 127.5 mm
Net Weight 0.59 kg (0.7 kg gross kit weight)
Successor Model Reference CI854BK01 (3BSE069449R1) for updated RoHS 2 compliance guidelines

 

Detailed Product Overview

The ABB CI854AK01 (3BSE030220R1) serves as a primary fieldbus integration module for ABB AC 800M automated process controllers. In System 800xA automation architectures, the AC 800M controller relies on CEX-Bus interface modules to exchange real-time field data with external fieldbus networks. The CI854AK01 provides the physical and protocol interface required to connect PROFIBUS-DP and DP-V1 field devices directly into the Control Builder M engineering environment.

Supplied as a matched kit, the CI854AK01 consists of the active CI854 processing module and the TP854 passive baseplate. The TP854 baseplate clamps directly onto a standard 35 mm DIN rail, establishing mechanical support, shield grounding, internal CEX-Bus signal routing, and 24 V DC power distribution. The CI854 processing unit plugs directly into the baseplate header, allowing maintenance personnel to extract or insert the active card without disrupting power or data continuity across neighboring CEX-Bus modules.

Equipped with dual 9-pin D-sub RS-485 interfaces, the module supports both master-slave cyclic communication for fast process I/O updates and acyclic DP-V1 messaging (MS1/MS2 connections). Acyclic communication allows maintenance engineers to execute online field device parameterization, retrieve asset diagnostics, and manage Device Type Managers (DTMs) via FDT/DTM tools within System 800xA without interrupting high-speed cyclic control loops.

CI854AK01 3BSE030220R1

CI854AK01 3BSE030220R1

Engineering Selection Highlights

  • Complete Hardware Interface Kit: Supplied with both the CI854 communication processor and the TP854 baseplate, providing a complete mounting solution for CEX-Bus expansion.
  • Dual-Channel PROFIBUS-DP/V1 Connectivity: Provides two independent master ports supporting communication speeds up to 12 Mbit/s for high-density field network routing.
  • Line and Module Redundancy Support: Configurable for line-redundant PROFIBUS network topologies to prevent loss of signal from field cabling faults.
  • On-Line Hot Replacement (RIOP): Baseplate architecture permits Removal and Insertion Under Power (RIOP), eliminating control downtime during module servicing.
  • Full FDT/DTM Asset Management: Native support for DP-V1 acyclic messaging enables remote device calibration and status monitoring via System 800xA Device Library Wizard tools.
  • Spare Part Lifecycle Note: Original CI854AK01 (3BSE030220R1) assemblies serve as standard replacement units for existing legacy control lines; new facility projects typically specify the updated CI854BK01 variant.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control Platform ABB AC 800M Controller Series (PM860, PM861, PM864, PM865, PM866) Connects to controller via the CEX-Bus line
Control Software Control Builder M / System 800xA (Versions 4.0 through 5.1 and higher) Device integration managed via Device Import Wizard (GSD files) or DTMs
Baseplate Module ABB TP854 (3BSE025349R1) Baseplate Assembly Included in kit; routes 24 V DC auxiliary power and CEX-Bus signals
Cables and Connectors Standard PROFIBUS RS-485 shielded twisted-pair cables with 9-pin D-sub connectors Bus termination resistors must be enabled at the physical end nodes of each segment
Alternative Version ABB CI854BK01 (3BSE069449R1) Direct functional successor model manufactured under RoHS 2 guidelines

 

Dimensions, Mounting & Connection Notes

  • Module Dimensions: Width: 59 mm, Height: 186 mm, Depth: 127.5 mm.
  • Net Module Weight: 0.59 kg.
  • Mounting Method: Snap-on mounting via TP854 baseplate onto standard 35 mm DIN rail (EN 50022).
  • Power Supply Distribution: Receives 24 V DC logic power directly from the CEX-Bus backplane feed via the TP854 baseplate.
  • Physical Connectors: Dual female 9-pin D-sub DB9 ports for channel 1 and channel 2 PROFIBUS RS-485 cabling.
  • Grounding Requirements: Baseplate features integrated metallic ground clips that establish low-impedance contact with the DIN rail; ensure the rail is bonded to system PE ground.

 

FAQ

What components are included in the ABB CI854AK01 kit?

The CI854AK01 kit (part number 3BSE030220R1) includes the active CI854 PROFIBUS-DP/V1 communication interface module and the passive TP854 baseplate assembly.

What is the difference between CI854AK01 and CI854BK01?

CI854AK01 (3BSE030220R1) is the original PROFIBUS interface kit for AC 800M systems. CI854BK01 (3BSE069449R1) is the direct RoHS 2-compliant successor model specified for newer system builds, while the AK01 variant remains the primary direct spare part for maintaining existing installations.

What maximum bus speed does the CI854AK01 support?

The module supports standard PROFIBUS-DP transmission speeds ranging from 9.6 kbit/s up to 12 Mbit/s, featuring automatic baud rate detection on active networks.

Can the CI854AK01 module be replaced while the system is powered?

Yes. The module supports Removal and Insertion Under Power (RIOP). The active CI854 module can be unlatched and replaced on an energized TP854 baseplate without interrupting power to adjacent CEX-Bus expansion modules.

 

Verification & Troubleshooting Notes

  • Baseplate Interlocking: Confirm that the TP854 baseplate side-locking mechanisms are fully engaged with adjacent CEX-Bus modules before inserting the CI854 processing unit.
  • Front-Panel LED Diagnostics:
    • RUN (Green): Indicates normal internal operation and active processing.
    • FAULT (Red): Flags hardware failures or self-test execution errors during boot.
    • Channel Tx/Rx (Yellow/Green): Displays active data transmission and reception across individual PROFIBUS ports.
  • Bus Termination Verification: Ensure physical PROFIBUS bus termination switches are set to ON at the first and last physical devices on each RS-485 segment to prevent reflection errors.
  • GSD / HWD File Integration: When adding new PROFIBUS slave hardware to the AC 800M configuration, convert manufacturer GSD files into HWD format using the Device Import Wizard (DIW) in Control Builder M.