Description
Core Product Summary
The ABB DATX110 (also designated DATX 110) is an I/O board identified by product numbers 3ASC25H209 and 3BSC980004R784. It is designed as a control/interface board without analog outputs (No AO) for use in ABB ASTAT crane motion control systems and related legacy AC drive applications.
The board provides digital input/output interfacing and signal handling between the drive control electronics and field devices. It is a specialized spare/replacement module for existing ASTAT installations.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Type Designation | DATX110 / DATX 110 |
| Product / Order Numbers | 3ASC25H209, 3BSC980004R784 |
| Product Type | I/O Board (No Analog Output) |
| Primary Application | ASTAT crane motion control systems / legacy AC drives |
| Function | Digital I/O interfacing and control signal processing |
| Origin | Sweden / Finland (typical for this series) |
Detailed Product Overview
The ABB DATX110 is a process I/O / control board used in ABB’s ASTAT family of low-voltage AC drive systems, particularly those applied to crane and motion control applications. The “No AO” designation indicates the board does not include analog output channels and is intended for digital signal handling and control interfacing.
It mounts as a plug-in or terminal-style board within the drive or control enclosure and interfaces with the main control electronics. The board handles digital inputs and outputs required for status monitoring, command signals, and interlocks typical of crane and material-handling drives.
Because it is a legacy product, exact channel counts, voltage levels, and connector details are defined in the original ASTAT system documentation for the specific drive variant. The dual product numbering (3ASC25H209 and 3BSC980004R784) refers to the same DATX110 hardware; both identifiers are used in ordering and inventory systems.
The module is intended as a direct replacement or spare for existing ASTAT installations. Compatibility should be confirmed against the original system configuration and firmware/hardware revision of the host drive.

DATX110 3BSC980004R784
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Host System | ABB ASTAT crane motion control / legacy AC drives | Primary application area |
| Board Type | I/O board without analog outputs | Digital signal focus |
| Identification | 3ASC25H209 or 3BSC980004R784 | Both numbers refer to DATX110 |
| Replacement Use | Direct spare for matching ASTAT systems | Verify against original drive documentation |
Dimensions, Mounting & Connection Notes
Physical form is a circuit board intended for installation inside the drive or control cabinet. Exact dimensions and mounting method follow the ASTAT series mechanical standards. Field connections are made via the board’s terminal or connector interface according to the system wiring diagrams.
When replacing the board, power down the system, observe ESD precautions, and follow the original equipment installation procedure. Confirm the board revision matches the host drive requirements.
FAQ
What is the ABB DATX110?
It is an I/O board (No Analog Output) used in ABB ASTAT crane motion control systems and related legacy AC drives. Product numbers are 3ASC25H209 and 3BSC980004R784.
Are 3ASC25H209 and 3BSC980004R784 the same product?
Yes. Both identifiers refer to the DATX110 I/O board.
What systems use the DATX110?
It is primarily associated with ABB ASTAT crane motion control and legacy AC drive applications.
Does the DATX110 include analog outputs?
No. It is specified as an I/O board without analog outputs (No AO).
Is this a current production product?
It is a legacy board typically supplied as a spare or replacement for existing ASTAT installations. Confirm availability and revision compatibility with the original system.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626