Sale!

ABB NVAR-45 Varistor Board for ACS800/ACS600 Drives

  • Model: NVAR-45 (Associated P/N 57620170)
  • Brand: ABB
  • Series: ACS600 / ACS800 accessory
  • Core Function: Overvoltage and transient surge suppression
  • Product Type: Varistor Board / MOV Surge Protection Module
  • Key Specs: Metal oxide varistor assembly, high energy absorption, PCB/slide-in mount
  • Condition: New Original / New Surplus
Categories: , , , , SKU: NVAR-45 Brand:

Description

3. Key Technical Specifications

Parameter Value
Product Type Varistor Board / Surge Suppression Module
Compatible Drives ABB ACS600, ACS800 series (also referenced with ACS580)
Component Type Metal Oxide Varistor (MOV) assembly
Function Overvoltage protection / transient suppression
Mounting PCB mount / slide-in module
Protection Class (typical) IP20 (internal component)
Material Sintered metal oxide / phenolic resin housing
Energy Handling High energy absorption capability
Associated Part Number 57620170
Application Industrial VFD input protection

4. Product Introduction

The ABB NVAR-45 is a varistor board designed for overvoltage and transient surge protection in ABB ACS600 and ACS800 series frequency converters. It uses a metal oxide varistor (MOV) assembly to clamp voltage spikes caused by lightning, capacitor switching, or inductive load events.

Installed as a PCB or slide-in module, the NVAR-45 diverts excess energy away from the drive’s rectifier and power electronics. This prevents damage to sensitive components and helps maintain long-term reliability of the VFD in industrial environments with unstable or noisy power supplies.

NVAR-45

NVAR-45

NVAR-45

NVAR-45

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
Drive trips on overvoltage Failed or degraded varistor board ✅ High Inspect NVAR-45 for discoloration, cracking, or burn marks Replace the board if visual damage is present
Repeated input stage failures Missing or ineffective surge protection ✅ High Confirm NVAR-45 is installed and correctly seated Install or replace the module before further operation
No visible damage but protection lost End-of-life MOV degradation ✅ Medium Compare with known-good unit or measure clamping behavior if possible Replace as preventive maintenance after major surge events
Drive powers up normally External power quality issue ❌ Low Check supply voltage and upstream protection Address line-side transients; do not condemn the NVAR-45 first
Module will not seat properly Bent pins or incorrect revision ✅ Medium Visually inspect connector and board edges Verify correct part number and orientation

If the drive continues to fault after these checks, record the exact fault codes, note any recent power events, photograph the NVAR-45 installation, and contact technical support with the drive serial number and firmware version.

6. Frequently Asked Questions (FAQ)

Q: Which ABB drives use the NVAR-45?
The NVAR-45 is primarily specified for ACS600 and ACS800 series frequency converters. Some references also list compatibility with ACS580 systems. Always verify against the specific drive hardware manual.

Q: Is the NVAR-45 the same as part number 57620170?
Yes. 57620170 is the common associated or alternative reference number for the NVAR-45 varistor board.

Q: Can I run the drive without the NVAR-45 installed?
It is not recommended. The module provides essential surge protection for the input stage. Operating without it increases the risk of rectifier or IGBT damage during voltage transients.

Q: Is this a field-replaceable part?
Yes. It is designed as a slide-in or PCB-mount module. Power down the drive, follow lock-out/tag-out procedures, and observe ESD precautions when handling.

Q: How do I know if the varistor board has failed?
Look for physical signs such as cracked or discolored MOVs, burn marks, or a strong burnt smell. In many cases the board shows clear visual evidence after a high-energy surge event.

Q: Why is surplus pricing available for this part?
These are new original or new-surplus units that have never been installed in a drive. They are inspected for physical condition and carry a standard warranty. OEM lead times for ACS series accessories can vary; ready stock reduces downtime.

Q: Does the NVAR-45 require configuration or software?
No. It is a passive protection component. Once correctly installed it functions without parameter settings.