Sale!

ABB PPC907BE 3BHE024577R0101 Control Board

Parameter Specification
Type Designation PPC907BE / PP C907 BE: AMC34
Order Number 3BHE024577R0101
Product Type Control Board (Application & Motor Control)
Delivery Condition Board delivered without software
Software Loading Performed by ABB service engineer
Typical Weight Approximately 0.4 kg
Primary Use Drive and power electronics control systems
Categories: , , , , SKU: PPC907BE 3BHE024577R0101 Brand:

Description

Core Product Summary

The ABB PPC907BE (order number 3BHE024577R0101) is a control board designated as PP C907 BE: AMC34. It functions as an application and motor control (AMC) board used in ABB drive and power electronics systems.

The board is supplied without application software. Correct software and parameter settings are loaded by an ABB service engineer during installation or commissioning. It serves as a core control and interface module within the host drive system.

Key Technical Specifications

Parameter Specification
Type Designation PPC907BE / PP C907 BE: AMC34
Order Number 3BHE024577R0101
Product Type Control Board (Application & Motor Control)
Delivery Condition Board delivered without software
Software Loading Performed by ABB service engineer
Typical Weight Approximately 0.4 kg
Primary Use Drive and power electronics control systems

Detailed Product Overview

The ABB PPC907BE is a printed circuit board assembly used as the application and motor control module in selected ABB industrial drive systems. It handles control logic, signal interfacing, monitoring, and diagnostic functions required by the drive.

The board is identified by the dual designation PPC907BE and the official order number 3BHE024577R0101. In ABB documentation it appears under the description “PP C907 BE: AMC34; CONTROL BOARD.” The board is delivered without pre-loaded application software; the correct firmware and parameter set for the specific drive configuration are downloaded on site by authorized ABB personnel.

It is designed as a plug-in or chassis-mounted control board that interfaces with the drive’s power stage, sensors, and higher-level control networks. Exact electrical interfaces, memory capacity, and supported protocols depend on the host drive model and system revision.

Because the board is a specialized control component, replacement requires matching the exact hardware revision and loading the appropriate software configuration. It is typically used as a spare or service part for existing installations.

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Product Family ABB drive / power electronics control systems AMC34 control board
Software Not pre-loaded Must be downloaded by ABB service
Identification 3BHE024577R0101 / PPC907BE Both numbers refer to the same board
Installation Plug-in control board Follow host drive installation procedure
Service Requirement Authorized ABB engineer for software Required for correct operation

 

PPC907BE 3BHE024577R0101

PPC907BE 3BHE024577R0101

Dimensions, Mounting & Connection Notes

The board is a compact PCB assembly intended for installation inside the drive control enclosure. Approximate net weight is 0.4 kg. Exact mechanical dimensions and connector layout follow the host drive series standards.

Mounting is typically by plug-in connectors or chassis fasteners. Power and signal connections are made through keyed board connectors. Observe ESD precautions and power-down procedures when handling or replacing the board. After installation, the correct application software must be loaded before the drive can be commissioned.

FAQ

What is the ABB PPC907BE / 3BHE024577R0101?
It is an application and motor control (AMC34) board used in ABB drive systems. The official order number is 3BHE024577R0101.

Does the board come with software?
No. The board is delivered without software. An ABB service engineer downloads the correct software and parameters for the specific application.

What is the type designation?
PP C907 BE: AMC34 (also referred to as PPC907BE).

Is this board used as a spare part?
Yes. It is commonly stocked and supplied as a replacement control board for compatible ABB drive installations.

What should be verified before replacement?
Confirm the exact order number 3BHE024577R0101, hardware revision, and that the correct software will be loaded by authorized personnel after installation.