Description
Core Product Summary (Brand / Model / Key Attributes)
The ABB S200-ACN (Part Number 490176052) is a ControlNet network communication adapter designed for the ABB S200 I/O system family. Operating within ABB ControlIT and process automation architectures, this adapter unit interfaces a cluster of local S200 I/O modules directly to a high-speed ControlNet fieldbus network.
Powered by a 24 VDC external supply, the module handles deterministic data exchange, network synchronization, and I/O bus management for connected digital, analog, and specialized function modules. It features dual BNC coaxial connectors for redundant ControlNet media links, rotary address switches for node identification, and LED status indicators for real-time fieldbus diagnostic feedback.
Key Technical Specifications
| Technical Parameter | Specification Value |
| Product Model / Part Number | S200-ACN / 490176052 |
| Product Type / Function | ControlNet Communication Adapter Unit |
| System Compatibility | ABB S200 I/O System / ControlIT |
| Fieldbus Protocol | ControlNet |
| Supply Voltage | 24 VDC nominal (19.2 VDC to 31.2 VDC range) |
| Fieldbus Connectors | Dual BNC connectors (Media A and Media B) |
| Node Addressing | Front-panel rotary address switches |
| System I/O Capacity | Supports up to 8 S200 I/O modules per cluster |
| Operating Temperature | 0°C to +55°C |
Detailed Product Overview
The ABB S200-ACN (490176052) functions as the central communication gateway for remote I/O station clusters in ABB process automation installations. By converting backplane signals from local S200 I/O cards into standardized ControlNet protocol frames, it enables real-time, deterministic communication between field sensors/actuators and host controllers.
Equipped with dual coaxial BNC interfaces, the S200-ACN supports redundant cable topologies to prevent communication loss in the event of a single network media cable failure. Its integrated power circuitry distributes system logic power across the S200 backplane to energize connected I/O module electronics.
The front panel features rotary decimal switches for node address configuration without requiring external setup software. Embedded LED indicators provide instant visual verification of power status, backplane health, and ControlNet network activity on both channels.
Engineering Selection Highlights
- ControlNet Integration: Enables seamless fieldbus linking of S200 I/O expansion racks to host controllers over ControlNet protocol.
- Redundant Network Interfaces: Dual BNC connections (Channel A and Channel B) support redundant physical media configurations for high system availability.
- Hardware Node Addressing: Two front-mounted rotary switches allow direct physical setting of the ControlNet network node address.
- Integrated Backplane Power: Converts 24 VDC input into regulated internal logic power to drive connected S200 I/O cards.
- Diagnostic Visuals: Dedicated LED status displays simplify troubleshooting of power delivery, internal bus faults, and network communication errors.

S200-ACN (490176052)
Dimensions, Mounting & Connection Notes
- Mounting Standard: Snaps onto standard 35 mm DIN rail assemblies (EN 50022).
- Power Terminations: Screw terminals for 24 VDC power supply connection and earth ground.
- Network Terminations: Two BNC coax connectors located on the module housing for network channel attachments.
- Installation Clearances: Maintain recommended vertical spacing within the cabinet to allow adequate heat dissipation and cable bend radii for coaxial leads.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| System Platform | ABB S200 I/O / ControlIT Architecture | Connects local I/O cluster to host control networks |
| Network Protocol | ControlNet coax media | Requires standard 75-ohm RG-6 coaxial cabling and BNC terminations |
| Power Supply | 24 VDC external power | Connect to dedicated power terminal block on the adapter base |
| Module Support | ABB S200 series I/O modules | Supports up to 8 local I/O cards on the same DIN rail assembly |
FAQ
What is the primary function of the ABB S200-ACN (490176052)?
The S200-ACN is a communication adapter that connects a local cluster of ABB S200 I/O modules to a ControlNet fieldbus network.
How is the ControlNet node address configured on the S200-ACN?
Node addresses are set manually using the two rotary switches located on the front panel of the module.
Does the module support network redundancy?
Yes, it features dual BNC connectors (Channel A and Channel B) allowing connection to dual-redundant ControlNet coaxial cable runs.
What voltage is required to operate the S200-ACN adapter?
The module operates on a nominal 24 VDC power supply input.
Verification & Troubleshooting Notes
- Power & Status LED Verification: Confirm that the power LED is steady green. Red or flashing diagnostic LEDs indicate power supply out-of-spec conditions or internal module hardware faults.
- Network Channel Diagnostics: Check the Channel A and Channel B LEDs; amber or red states highlight missing network termination, cable breaks, or address conflicts on the ControlNet trunk.
- Backplane Continuity: Ensure all adjacent S200 I/O modules are firmly seated and locked on the DIN rail to maintain proper backplane interconnectivity.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626