Description
Core Product Summary (Brand / Model / Key Attributes)
The Alfa Laval EPC-400 is a microprocessor-based process control unit designed to automate Alfa Laval centrifugal separation systems, including ALCAP fuel oil and lubricating oil purifiers. Housed in a wall-mounted sheet-steel enclosure, it coordinates separator startup, oil purification, water-transducer monitoring, sludge discharge, preheater temperature regulation, and controlled shutdown sequences.
Built around an internal dual-board control module (3183050104 / 31830-5010-4), step-down control transformer (T1), power line filter (Z1), and terminal baseplate (XA), the EPC-400 operates on a 48 V AC control supply (+10% / −15%) and functions in ambient temperatures up to 55 °C. Its hinged front door features a five-digit numerical LED display, rotary mode selector switch, four parameter and operation push-buttons, and dedicated status/alarm LED arrays for local operator monitoring and parameter configuration.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer / Brand | Alfa Laval |
| Exact Model Designation | EPC-400 |
| Product Type | Microprocessor-based separator process control unit |
| Target Separation Systems | Alfa Laval ALCAP centrifugal fuel and lube oil separators |
| Control Supply Voltage | 48 V AC (+10% / −15%) |
| Internal Control Voltages | 10 V AC, 20 V AC, 24 V AC secondary taps via internal transformer T1 |
| Main Cabinet Circuit Breaker | 3.0 A main switch / circuit breaker (F11) |
| Temperature Control Function | Integrated PI controller for Heatpac electric heaters or steam/hot-water/thermal-oil control valves |
| Operator Interface | 5-digit numerical LED display, rotary mode selector switch (including programming mode P), 4 push-buttons, status/alarm/output LED arrays |
| Maximum Ambient Operating Temperature | 55 °C |
| Mounting Configuration | Wall/bulkhead-mounted steel enclosure with hinged lockable front door |
Detailed Product Overview
The Alfa Laval EPC-400 serves as the dedicated process automation cabinet for Alfa Laval centrifugal oil separators in marine engine rooms and industrial power plants. Rather than acting as a motor starter—which is housed separately—the EPC-400 executes the process control sequence: verifying interlocks, energizing operating-water and process solenoid valves, monitoring process sensors, initiating scheduled or water-triggered sludge discharges, and stopping the separator automatically if an abnormal operating condition occurs.
Inside the cabinet, the architecture is divided between the power/field-termination baseplate and the door-mounted control electronics:
- Baseplate & Power Conditioning: Incoming 48 V AC control power enters through the main circuit breaker (
F11) and power line filter (Z1) to step-down transformerT1, which supplies isolated low-voltage AC taps (10 V, 20 V, and 24 V AC) to the control electronics. Field wiring from solenoid valves, pressure switches, temperature sensors, and the motor starter terminates on terminal blockXA. - Hinged Control Module (
3183050104): Fastened behind the front door, the two-board microprocessor assembly houses the sequence logic, output relays, five-digit display, push-buttons, and ALCAP water-transducer interface.
In addition to bowl-discharge automation, the EPC-400 incorporates a proportional-integral (PI) temperature control function capable of regulating either an Alfa Laval Heatpac electric preheater or a pneumatic/electric modulating valve on steam, hot-water, or thermal-oil heaters. Operating parameters—organized into installation parameters (20–49), sequence timers (50–89), and service parameters (90–95)—are stored in non-volatile memory and adjusted directly from the front panel.

EPC-400
Engineering Selection Highlights
- Complete Control Unit vs. Internal Module (
vs.3183050104) → Selecting thecovers the complete wall-mounted control cabinet assembly (enclosure, baseplate terminalsXA, transformerT1, filterZ1, breakerF11, and internal control module), whereas3183050104identifies only the replaceable dual-board electronic module inside the door. - 48 V AC Control Supply Architecture → Requires a 48 V AC (+10% / −15%) control power source, typically supplied from the separator’s motor starter control transformer rather than direct 110/230/440 V AC shipboard or plant mains.
- Integrated ALCAP Water-Transducer & Heater Control → Combines water-content discharge triggering and PI preheater temperature regulation inside a single enclosure, reducing external panel instrumentation.
- 55 °C Ambient Temperature Rating → Engineered for elevated machinery-space ambient temperatures common in marine engine rooms and turbine/diesel power stations.
- On-Panel Parameter Programming → Allows commissioning engineers to configure timers, alarm limits, and heater control modes directly via the front rotary selector (
P) and push-buttons without proprietary external software.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Separation Equipment | Alfa Laval ALCAP centrifugal separators (fuel oil and lubricating oil purifiers) | Coordinates bowl-operating water valves, feed valves, and discharge sequences. |
| Control Power Source | 48 V AC (+10% / −15%) supply | Typically derived from the dedicated control transformer inside the companion separator motor starter cabinet. |
| Preheater Control Interface | Alfa Laval Heatpac electric heater or steam/hot-water/thermal-oil control valve | Configured via installation parameters to match electric contactor pulsing or analog/modulating valve actuation. |
| Water Monitoring Sensor | Alfa Laval ALCAP water transducer (WT200 / compatible transducer) |
Connects to the rear board (A2) interface for water-in-oil monitoring and automated water drain/discharge triggering. |
| Internal Spare Sub-Assemblies | Control module 3183050104, transformer 4900795-18, 3.0 A breaker 4900860-26 |
Verify exact sub-component article numbers inside existing units when ordering maintenance spares. |
Dimensions, Mounting & Connection Notes
- Enclosure Mounting: Designed for vertical bulkhead or wall mounting near the separator skid using the cabinet’s exterior mounting brackets/holes, with sufficient front clearance to swing the hinged door open fully.
- Cable Entry & Field Termination: Field cables enter through bottom cable glands and terminate on numbered terminal blocks (
XA) mounted on the interior baseplate. Separate low-voltage sensor/transducer signal cables from AC solenoid power leads. - Door & Module Access: Unlocking and swinging open the front door exposes the hinged aluminum frame of the internal control module. Loosening the two module retention screws allows the board assembly to pivot outward for inspection of the rear board (
A2) and plug connectors. - Environmental Limits: Install away from direct steam leaks or water spray and maintain ambient air temperature at or below 55 °C.
FAQ
What is the Alfa Laval EPC-400? The Alfa Laval EPC-400 is a microprocessor-based control unit that automates startup, oil separation, water-transducer monitoring, sludge discharge, preheater temperature regulation, and shutdown sequences for Alfa Laval centrifugal separators.
What supply voltage does the Alfa Laval EPC-400 require? The EPC-400 operates on a 48 V AC (+10% / −15%) control supply, which is stepped down internally by transformer T1 to 10 V, 20 V, and 24 V AC for the electronic boards.
What is the difference between the EPC-400 and part number 3183050104? refers to the complete wall-mounted separator control cabinet unit, whereas 3183050104 (31830-5010-4) is the spare-part number for the internal dual-board microprocessor control module mounted behind the cabinet door.
Can the EPC-400 control the oil preheater temperature? Yes. It includes a built-in proportional-integral (PI) temperature controller capable of regulating either an Alfa Laval Heatpac electric heater or a modulating valve on steam, hot-water, or thermal-oil heaters.
What is the maximum ambient operating temperature for the EPC-400? The EPC-400 control cabinet is rated for ambient operating temperatures up to 55 °C.
Verification & Troubleshooting Notes
- No Display or Control Power: Verify that the incoming 48 V AC supply is present at the cabinet input terminals, check that main switch/circuit breaker
F11(3.0 A) is switched on, and inspect baseplate fusesF12andF13. - LED & Display Verification: Press and hold the alarm reset button on the front panel for 5 seconds to run the built-in lamp test, confirming that the five-digit numerical display and all status/alarm LEDs illuminate.
- Parameter Verification Before Service: Before replacing internal assemblies or altering configuration settings, step through parameters
20–49(installation),50–89(timers), and90–95(service) with the mode switch in positionPand record all active values. - Electrical Safety: Isolate incoming 48 V AC control power and any externally powered relay circuits at the motor starter panel before opening the enclosure to service fuses, terminal blocks, or internal boards.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626