Description
Core Product Summary
The Allen-Bradley 1764-28BXB is a 28-point MicroLogix 1500 programmable controller base unit. It combines a 24 V DC power supply, 16 discrete 24 V DC inputs, and 12 outputs in a compact controller intended for machine-level automation and control applications.
Its output complement consists of six relay outputs and six 24 V DC FET outputs. The controller provides eight 20 kHz inputs and two 20 kHz outputs, which can be configured for pulse-train-output (PTO) or pulse-width-modulation (PWM) functions. Communication is provided through an RS-232C port, and the controller uses a 21-point removable terminal block for its inputs and outputs.
Key Technical Specifications
| Item | Specification |
|---|---|
| Brand | Allen-Bradley, Rockwell Automation |
| Catalog number | 1764-28BXB |
| Product family | MicroLogix 1500 |
| Product type | 28-point controller base unit |
| Total I/O | 28 points |
| Inputs | 16 discrete 24 V DC inputs |
| Inputs, high-speed | 8 inputs rated for 20 kHz operation |
| Outputs | 12 outputs |
| Relay outputs | 6 relay outputs |
| FET outputs | 6 24 V DC FET outputs |
| High-speed outputs | 2 outputs rated for 20 kHz operation |
| Input supply type | 24 V DC |
| Line power | 20.4–30 V DC |
| Power consumption | 30 W |
| Communication port | RS-232C |
| Terminal block | 21-point removable terminal block |
| Dimensions | 138 mm H × 87 mm D |
| Programming software | RSLogix 500 |
| UPC | 611320023626 |
Engineering Selection Highlights
- The 1764-28BXB provides 16 24 V DC inputs and 12 outputs. Its fixed I/O count must match the machine’s field-device population or be supplemented through an approved expansion approach.
- Six outputs are relays and six are 24 V DC FET outputs. Relay outputs suit switching applications that require contact isolation, while FET outputs are intended for 24 V DC load switching.
- Eight inputs and two outputs support 20 kHz operation. These high-speed channels are relevant to counting, pulse-capture, PTO, and PWM functions where fast signal response is required.
- The controller includes two independent PTO functions. They can run separate motion profiles, making the base unit applicable to two-axis pulse-output motion control when paired with compatible drive equipment.
- The base unit includes a 24 V DC power supply rated 20.4–30 V DC. The external supply must remain within this range and provide adequate capacity for the controller and connected loads.
- The RS-232C port provides the controller’s serial interface. Confirm the required cable, protocol, and connected device before integrating operator-interface, programming, or communication equipment.
- The 21-point removable terminal block simplifies wiring service. It supports replacement or maintenance without rewiring every field conductor, provided the terminal block is compatible with the installed base unit.

1764-28BXB
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Controller family | MicroLogix 1500 | The 1764-28BXB is a MicroLogix 1500 base unit. |
| Processor | 1747-LSP processor | MicroLogix 1500 documentation identifies the 1747-LSP as the processor used with this base unit. |
| Memory module | Memory module with real-time clock | The documented controller configuration includes a memory module with real-time clock. |
| Line power | 20.4–30 V DC | Connect the controller’s line terminals to the 24 V DC terminals of the power supply. |
| Input signal type | 24 V DC | The 16 inputs are 24 V DC discrete inputs. |
| Output types | Relay and 24 V DC FET | Match load voltage, current, and switching requirements to the appropriate output group. |
| High-speed functions | PTO and PWM | Outputs 2 and 3 can be configured for PTO or PWM operation. |
| Programming software | RSLogix 500 | Use RSLogix 500 for controller configuration and application development. |
| Interface cabling | 1492 interface modules and cables | Rockwell documentation identifies compatible 1492 cables and interface modules for 1764-28BXB inputs and outputs. |
Dimensions, Mounting & Connection Notes
| Item | Verified information |
|---|---|
| Height | 138 mm |
| Depth | 87 mm |
| Terminal block | 21-point removable terminal block |
| Terminal-block function | Inputs for the 1764-28BXB and outputs for all base units |
| Input wiring | Supports sinking and sourcing input wiring arrangements |
| Power connection | Line terminals connect to the 24 V DC terminals of the power supply |
| High-speed outputs | Outputs 2 and 3 support PTO or PWM configuration |
| Interface accessories | Compatible 1492 I/O-ready cables and interface modules are documented for this base unit |
Detailed Product Overview
The Allen-Bradley 1764-28BXB is a MicroLogix 1500 28-point controller base unit designed for compact machine-control applications. It integrates 16 discrete 24 V DC inputs and 12 outputs with a 24 V DC power supply, an RS-232C communication port, and high-speed I/O capability.
The output arrangement is split between six relay outputs and six 24 V DC FET outputs. This division allows the controller to serve both contact-isolated switching loads and 24 V DC electronic loads. The relay outputs are suitable where a mechanical contact output is required, while the FET outputs are intended for 24 V DC switching applications. Output loading must be engineered within the ratings stated for the specific output group and the connected interface accessories.
The controller includes eight 20 kHz inputs and two 20 kHz outputs. These high-speed channels make the 1764-28BXB more than a conventional discrete-I/O controller. The two high-speed outputs can be configured as PTO or PWM outputs, and the two PTO functions are independent of one another. This makes the base unit relevant to applications involving pulse-based motion control, provided the connected drive and motor system accept the selected pulse-output arrangement.
Power integration is built into the base unit. Its line-power input accepts 20.4–30 V DC and has a stated power consumption of 30 W. The line terminals connect to the 24 V DC terminals of the external power supply. Because the controller and its I/O loads share the power architecture, supply sizing should account for the controller’s consumption as well as the demands of connected field devices and expansion equipment.
The 21-point removable terminal block provides the field-wiring interface. Rockwell documentation identifies it as serving the inputs of the 1764-28BXB and the outputs of all MicroLogix 1500 base units. The controller supports both sinking and sourcing input wiring arrangements, so the field-device polarity and common-terminal configuration must match the selected wiring method.
The RS-232C port provides serial communication for the controller. Its practical use depends on the connected device, cable, and communication configuration. The controller is programmed with RSLogix 500, and the MicroLogix 1500 system documentation identifies the 1747-LSP processor and a memory module with real-time clock as components of the documented controller configuration.
Applications & System Role
The Allen-Bradley 1764-28BXB is the I/O-and-power base unit in a MicroLogix 1500 controller system. It houses the controller’s integrated I/O, provides the 24 V DC supply connection, and provides the terminal interface for field inputs and outputs.
Its eight 20 kHz inputs and two 20 kHz outputs extend the controller beyond basic discrete control. The high-speed inputs can support fast pulse-related functions, while the two high-speed outputs can be configured as PTO or PWM outputs. Rockwell documentation describes the two PTO functions as independent and capable of running separate motion profiles, so the controller can serve simple two-axis motion applications when integrated with suitable drive equipment.
In a machine-control architecture, the 1764-28BXB combines local discrete I/O, power conversion, serial communication, and motion-output capability in one base unit. It is distinct from an expansion-I/O-only module: it is the controller base that supports the MicroLogix 1500 processor and system memory configuration.
FAQ
What is the Allen-Bradley 1764-28BXB?
It is a 28-point MicroLogix 1500 controller base unit with 16 24 V DC inputs, 12 outputs, an integrated 24 V DC power supply, and an RS-232C port.
How many inputs and outputs does it have?
It has 16 24 V DC inputs and 12 outputs.
What types of outputs does the 1764-28BXB provide?
It provides six relay outputs and six 24 V DC FET outputs.
Which inputs and outputs support 20 kHz operation?
Eight inputs and two outputs support 20 kHz operation.
Can it provide pulse-train output?
Yes. It has two 20 kHz outputs that can be configured for PTO or PWM operation.
What supply voltage does it require?
It requires a 20.4–30 V DC line-power supply.
Which communication port does it include?
It includes an RS-232C port.
Which software is used to program it?
The controller is programmed with RSLogix 500.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626