Sale!
MAE99-04
MAE99-04
MAE99-04

ALSTOM MAE00-10 RTD Termination Panel

  • Model: MAE00-10
  • Brand: ALSTOM / ALSTOM Controls
  • Series: Industrial Control / RTD Interface System
  • Core Function: RTD signal termination interface
  • Product Type: RTD Termination Panel
  • Key Specs: Temperature sensor termination, multi-channel RTD connection, industrial cabinet installation
  • ⚠️ Obsolete Model – Limited Stock Available
  • Condition: New Original / New Surplus / Refurbished (tested) options available
Get a Quote
Categories: , , , , SKU: MAE00-10 Brand:

Description

3. Key Technical Specifications

  • Part Number: MAE00-10
  • Manufacturer: ALSTOM Controls
  • Product Type: RTD Termination Panel
  • Main Function: RTD field wiring termination and signal interface
  • Application: Power generation, industrial automation, process monitoring systems
  • Signal Type: RTD temperature measurement signals
  • Installation: Industrial control cabinet / automation panel mounting
  • System Role: Interface between field temperature sensors and control electronics
  • Weight: Approx. 3.2 kg (varies by listing/configuration)
  • Condition Availability: New, surplus, and refurbished supply channels
  • Status: Legacy ALSTOM control component

 

4. Product Introduction

The ALSTOM MAE00-10 is an RTD Termination Panel designed for industrial temperature signal connection and termination applications. It is used in ALSTOM control systems where multiple RTD sensor signals require organized field wiring termination before connection to monitoring or control electronics.

This panel is mainly used for maintaining existing ALSTOM installations rather than new system builds. Before replacement, verify RTD wiring diagrams, terminal assignments, sensor type, and the connected control system interface.

MAE99-04
MAE00-10

 

5. Installation & Configuration Guide

Stage 1: Pre-Installation Preparation (Approx. 10 minutes)

⚠️ Safety First

  1. Notify operations before removing the existing termination panel.
  2. Place the monitored equipment into a safe condition.
  3. Apply lockout/tagout procedures where required.
  4. Isolate control power.
  5. Verify zero voltage before touching field wiring.

Tools Required

  • ESD wrist strap
  • PH1 screwdriver
  • Digital multimeter
  • Wire labels
  • Smartphone for reference photos
  • Terminal screwdriver

Data Backup

  1. Record the existing ALSTOM MAE00-10 installation location.
  2. Photograph:
    • Terminal blocks
    • RTD channel wiring
    • Cable labels
    • Shield grounding points
  3. Document:
    • RTD channel numbers
    • Sensor type
    • Cable routing

Stage 2: Removing the Old Module (Approx. 10 minutes)

  1. Open the control cabinet.
  2. Identify the MAE00-10 RTD termination panel.
  3. Label every RTD cable before removal.
  4. Disconnect field wiring carefully.
  5. Remove mounting screws or panel clips.
  6. Remove the old panel.

⚠️ Note: Keep the original panel until the replacement passes temperature signal verification.

Inspect:

  • Terminal screws
  • PCB tracks
  • Connector condition
  • Signs of overheating
  • Loose wiring

Stage 3: Installing the New Module (Approx. 15 minutes)

  1. Wear ESD protection before handling the panel.
  2. Confirm the label matches ALSTOM MAE00-10.
  3. Compare terminal layout with the removed unit.
  4. Mount the replacement panel.
  5. Reconnect RTD wiring according to the recorded photos.
  6. Verify terminal tightness.

Configuration Clone (Critical)

Check:

  • RTD channel mapping
  • Sensor polarity
  • Shield grounding
  • Terminal numbering

Self-Checklist

[ ] Correct MAE00-10 installed
[ ] RTD channels matched
[ ] Terminal screws secured
[ ] Cable labels verified

Stage 4: Power-On & Testing (Approx. 15 minutes)

Pre-Power Check

  1. Confirm no short circuits.
  2. Verify RTD resistance values.
  3. Check grounding continuity.
  4. Confirm all terminals are secure.

Power-On Steps

  1. Energize the control system.
  2. Monitor temperature input values.
  3. Compare readings with field measurements.
  4. Verify no input alarms.
  5. Confirm correct channel identification.

⚠️ Troubleshooting Note

  • Incorrect temperature reading: Check RTD wiring and sensor type.
  • Open circuit alarm: Inspect terminal connections.
  • Multiple channel faults: Verify common wiring and termination points.

 

6. Frequently Asked Questions (FAQ)

Q1: Is ALSTOM MAE00-10 still manufactured?

The MAE00-10 is a legacy ALSTOM component. Current availability is generally through surplus inventory, unused stock, or refurbished industrial suppliers.

Q2: What does the MAE00-10 do?

The MAE00-10 is an RTD Termination Panel. It provides the field wiring termination point for RTD temperature signals used by industrial monitoring and control systems.

Q3: Can I hot-swap the MAE00-10?

No. An RTD termination panel is connected to field instrumentation wiring. Shut down the related system and isolate power before removing it.

Q4: Will replacing the MAE00-10 change my temperature settings?

No configuration is normally stored in the termination panel itself. However, incorrect RTD channel wiring can create false temperature readings or alarms, so document wiring before removal.

Q5: Why is a legacy RTD termination panel still needed?

Many power plants and industrial facilities operate equipment with long service lifetimes. Replacing one small interface panel can be less disruptive than modifying the complete control system.

Q6: What should I verify before ordering MAE00-10?

Confirm:

  • Exact part number: MAE00-10
  • Terminal layout
  • RTD channel count
  • Existing ALSTOM control system compatibility
  • Condition: New Original, New Surplus, or Refurbished

Do not replace by appearance alone. Verify the wiring diagram and signal assignment before installation.

Related products