Sale!

Aquamaster-Rauma STC-2 Secondary Turning Controller

The Aquamaster-Rauma STC-2 (referenced part number AQ7351413) is a secondary turning controller from the control system of Aquamaster azimuth thrusters. Aquamaster propulsion units are steering propulsors in which the entire unit rotates to direct thrust, and the turning — azimuth — function of the unit is managed by a dedicated control system; the STC-2 is the secondary turning controller within that control arrangement, alongside the primary turning control units of the Aquamaster control system family.

Categories: , , , , SKU: Aquamaster-Rauma STC-2 Brand:

Description

Core Product Summary

The Aquamaster-Rauma STC-2 (referenced part number AQ7351413) is a secondary turning controller from the control system of Aquamaster azimuth thrusters. Aquamaster propulsion units are steering propulsors in which the entire unit rotates to direct thrust, and the turning — azimuth — function of the unit is managed by a dedicated control system; the STC-2 is the secondary turning controller within that control arrangement, alongside the primary turning control units of the Aquamaster control system family.

The unit belongs to the Aquamaster-Rauma product program of Aquamaster Rauma Oy of Rauma, Finland, whose azimuth thrusters are installed on oceangoing, coastal, and inland-waterway vessels, including tugs and dynamic-positioning vessels. Aquamaster thrusters and their control systems were later produced and supported by Rolls-Royce Oy Ab of Rauma, and Aquamaster thruster documentation is structured around the thruster’s delivery number and serial numbers, with the control system covered by a separate Control System Service Manual and User’s Guide for each delivery. The STC-2 is a spare part sought for the repair and maintenance of these existing thruster control systems, and installation-specific wiring, operation, and maintenance details are documented in the control-system manuals supplied with each thruster delivery.

Aquamaster-Rauma STC-2

Aquamaster-Rauma STC-2

Aquamaster-Rauma STC-2

Aquamaster-Rauma STC-2

Detailed Product Overview

An Aquamaster azimuth thruster generates thrust in any horizontal direction by rotating the complete propulsor unit about its vertical axis. This turning function is actuated by the thruster’s steering gear and commanded by the Aquamaster control system, which is delivered as an integral part of each propulsion package. The STC-2 is identified within this control system as the secondary turning controller — the component designated as STC-2 in Aquamaster turning control arrangements, with the reference AQ7351413 — complementing the primary turning controller units in the same product family.

For engineers maintaining an existing Aquamaster installation, the practical identification points are the type designation STC-2 marked on the unit together with the Aquamaster-Rauma or Kamewa Finland nameplate, and the item reference AQ7351413. A variant designated STC-2X with reference 944424 also exists within the same product family, so the exact type marking and serial number should be recorded when sourcing a replacement. Aquamaster thrusters are built to specific deliveries — each thruster is identified by an Aquamaster delivery number and serial number — and the control system supplied with that delivery has its own Control System Service Manual containing the wiring diagrams, operation instructions, and maintenance procedures. Replacement or repair of the turning controller therefore needs to be planned against the documentation of the specific delivery, and Aquamaster thruster documentation directs users to the manufacturer’s service organization for detailed technical information and maintenance instructions on the thrusters and their control systems.

The engineering relevance of the secondary turning controller is tied to the steering function of the thruster. Because an azimuth thruster’s direction of thrust depends entirely on the turning mechanism, the turning control chain is critical to the vessel’s manoeuvring capability, and the control system is designed with primary and secondary turning control functions. When servicing this controller, the relevant verification work — control-system wiring, signal paths to the steering gear, and function tests of the turning command — follows the procedures of the delivery-specific Control System Service Manual, and work on the thruster and its control system assumes general technical knowledge of azimuthing thrusters and marine control systems.

 

FAQ

What is the Aquamaster-Rauma STC-2?
It is the secondary turning controller of the Aquamaster azimuth thruster control system, referenced under part number AQ7351413, used to control the steering (turning) function of Aquamaster propulsion units.

Who manufactures Aquamaster thrusters and their control systems?
Aquamaster azimuth thrusters were produced by Aquamaster-Rauma of Rauma, Finland; production and support of the Aquamaster thruster range was later continued by Rolls-Royce Oy Ab of Rauma.

Which vessels use the equipment this controller belongs to?
Aquamaster azimuth thrusters are installed on oceangoing, coastal, and inland-waterway vessels, including tug and dynamic-positioning applications where thrust direction is controlled by rotating the propulsor.

How can the unit be identified when sourcing a replacement?
By the type designation STC-2 and the Aquamaster-Rauma nameplate together with the item reference AQ7351413; a variant designated STC-2X with reference 944424 also exists, so the exact type marking and serial number should be confirmed. Aquamaster thrusters and their control components belong to specific deliveries identified by delivery number and serial numbers.

Where are installation and maintenance details documented?
Each Aquamaster thruster delivery is supplied with a Control System Service Manual containing the drawings and diagrams for operation and maintenance of the control system, plus a User’s Guide for thruster and control system operation; the thruster’s own manual directs users to the manufacturer’s service organization for detailed technical information on the control systems.