Sale!

ASM DPC 2507250-2 2519232-21 Rev C Semiconductor Control Cabinet Assembly

The ASM DPC 2507250-2 (with internal interface board 2519232-21, Rev C) is a control cabinet assembly manufactured by ASM (ASM Advanced Semiconductor Materials / ASM America) for semiconductor manufacturing equipment. The assembly houses internal control electronics, wiring harnesses, and connector interfaces, including the 2519232-21 serial interface/converter assembly associated with RS-422 to RS-232 signal conversion.

Categories: , , , , SKU: DPC 2507250-2 2519232-21 Rev C Brand:

Description

Core Product Summary (Brand / Model / Key Attributes)

The ASM DPC 2507250-2 (with internal interface board 2519232-21, Rev C) is a control cabinet assembly manufactured by ASM (ASM Advanced Semiconductor Materials / ASM America) for semiconductor manufacturing equipment. The assembly houses internal control electronics, wiring harnesses, and connector interfaces, including the 2519232-21 serial interface/converter assembly associated with RS-422 to RS-232 signal conversion.

Because public OEM datasheets for this specific semiconductor equipment sub-assembly are limited, exact voltage ratings, tool platform compatibility, and revision-specific (Rev C) changes should be matched directly against the host ASM tool’s bill of materials (BOM) and schematic documentation before installation.

 

Key Technical Specifications

Parameter Specification
Manufacturer / Brand ASM (ASM Advanced Semiconductor Materials / ASM America)
Assembly Designation DPC 2507250-2 (Rev C)
Associated Sub-Board Part Number 2519232-21 (Serial Converter / Interface PCB, RS-422 to RS-232)
Equipment Domain Semiconductor processing equipment control cabinet / interface assembly
Revision Rev C

 

Detailed Product Overview

The ASM DPC 2507250-2 is an enclosure-based control cabinet assembly designed for ASM semiconductor processing systems. Within tool control architectures, a dedicated cabinet assembly groups internal circuit boards, signal conditioning or serial interface hardware, and internal harness wiring so sub-assemblies can be serviced or swapped as a cohesive unit.

In this configuration, part number 2519232-21—identified as an interface / RS-422 to RS-232 serial converter printed circuit board assembly—works alongside internal wiring and connectors inside the 2507250-2 control cabinet (Rev C). Serial protocol conversion between RS-422 differential signaling and RS-232 single-ended serial links is commonly used to bridge noise-resistant equipment/sub-controller communication lines with standard serial interfaces.

When sourcing or replacing a 2507250-2 cabinet assembly or 2519232-21 board, engineers and maintenance teams should verify exact part numbers, revision letters (Rev C), harness connectors, and any sub-components (such as capacitors, terminal blocks, or companion converter/rack hardware) against the target tool’s maintenance manual and configuration records.

DPC 2507250-2 2519232-21 Rev C

DPC 2507250-2 2519232-21 Rev C

DPC 2507250-2 2519232-21 Rev C

DPC 2507250-2 2519232-21 Rev C

Engineering Selection Highlights

  • Matched Assembly & Sub-Board Identification (DPC 2507250-2 / 2519232-21 / Rev C) → Links the cabinet-level assembly number with the internal RS-422/RS-232 serial interface board and revision level so buyers can confirm exact build alignment with existing tool documentation.
  • Integrated Cabinet & Harness Packaging → Consolidates internal boards, wiring, and external port/connector interfaces into a single cabinet assembly rather than loose discrete components.
  • Revision & Sub-Component Verification → Because semiconductor fab assemblies undergo hardware revisions and component-level wear over time, inspecting internal boards and verifying Rev C compatibility helps prevent mismatch during replacement.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host Equipment ASM semiconductor manufacturing equipment Confirm exact tool model, cabinet bay location, and BOM applicability prior to installation.
Serial Interface Function RS-422 to RS-232 serial conversion (2519232-21) Verify baud rate, pinout, and connector/cable mating against the connected subsystem.
Revision Level Rev C hardware revision Check tool revision control tables to confirm whether Rev C is approved for the target system.

 

Dimensions, Mounting & Connection Notes

  • Mechanical & Cabinet Handling: Inspect the cabinet housing, mounting points, side/front connector ports, and internal wiring harnesses for physical damage or loose connections before mounting.
  • Internal Board & Component Inspection: Before energizing the assembly, visually inspect internal PCBs—including board 2519232-21 and lower/auxiliary boards—for loose connectors, discolored components, or degraded capacitors.
  • ESD & Electrical Safety: Follow electrostatic discharge (ESD) precautions when handling circuit boards and isolate all electrical supplies per facility lockout/tagout procedures before connecting or disconnecting harnesses.

 

FAQ

What is the ASM DPC 2507250-2 2519232-21 Rev C?It is an ASM semiconductor equipment control cabinet assembly (DPC 2507250-2, Rev C) associated with the 2519232-21 serial/interface circuit board assembly.

What function does part number 2519232-21 serve?Part number 2519232-21 is an ASM interface/serial converter circuit board associated with RS-422 to RS-232 serial signal conversion.

Why is Rev C important when identifying this assembly? Hardware revisions such as Rev C indicate engineering or manufacturing updates to the assembly, making it important to verify revision compatibility with your equipment documentation and maintenance records.

 

Verification & Troubleshooting Notes

  • Communication Loss Across Serial Link: Verify that serial cables between RS-422 and RS-232 devices are firmly seated, check connector pinouts and cable continuity, and confirm that the 2519232-21 interface board is properly seated with intact power/signal connections.
  • Power-Up or Control Faults: Before applying power, inspect internal circuit boards and wiring harnesses for loose plugs, damaged traces, or aging/bulging capacitors, and verify incoming power and ground connections per the tool schematic.
  • Safety Precaution: Disconnect and lock out power sources before opening the control cabinet or handling internal printed circuit boards.