Sale!

ASML 854-8090-005 SVG Lithography Cap Gauge Assembly

Parameter Value
Part Number 854-8090-005
Designation Cap Gauge / Capacitive Gauge ASP Assembly
Product Type Electro-mechanical metrology subassembly
Origin Family SVG Silicon Valley Group, ASML lithography installed base
Categories: , , , , SKU: 854-8090-005 Brand:

Description

Core Product Summary

ASML 854-8090-005 is a capacitive gauge assembly originating from SVG Silicon Valley Group, used for wafer stage metrology on legacy lithography systems. The subassembly captures high-resolution position and gap measurements required for stage positioning during wafer patterning cycles.

This gauge assembly integrates capacitive sensing elements and associated mechanical mounting hardware. It feeds analog measurement signals to dedicated gauge interface boards inside the lithography platform, supporting closed-loop positioning control for the wafer stage.

 

Key Technical Specifications

Parameter Value
Part Number 854-8090-005
Designation Cap Gauge / Capacitive Gauge ASP Assembly
Product Type Electro-mechanical metrology subassembly
Origin Family SVG Silicon Valley Group, ASML lithography installed base

 

Detailed Product Overview

ASML 854-8090-005 is a capacitive gauge assembly built for non-contact gap and position metrology within SVG lithography systems. Capacitive gauge sensors deliver high-bandwidth, submicron-level position feedback to the machine control system, which stabilizes wafer stage alignment and focus during exposure sequences.

The assembly combines sensor heads, mounting fixtures, and signal routing hardware. It is physically positioned near the wafer stage or reticle stage to measure tiny positional deviations between moving stage components. Measurement outputs are sent to compatible gauge interface PCB cards that convert capacitive signals into digital positioning data for the host controller.

This spare is used for maintenance and fault replacement on older SVG lithography platforms. Matching the exact part number and revision is required during swap-out, because different cap gauge assemblies have distinct sensor calibration ranges and mounting offsets. Mismatched gauge variants will produce incorrect stage offset readings and impact overlay or focus performance.

854-8090-005

854-8090-005

854-8090-005

854-8090-005

FAQ

Q: What is ASML 854-8090-005? A: It is a capacitive cap gauge ASP assembly used for non-contact position and gap metrology on legacy SVG lithography systems.

Q: What function does the 854-8090-005 cap gauge assembly perform? A: It provides high-precision position feedback for wafer stage positioning, supporting focus and overlay control during lithography exposure.

Q: What type of sensing principle does this assembly use? A: It uses capacitive non-contact sensing to measure small gaps and positional displacements.

Q: Which system family is this part associated with? A: It belongs to the SVG Silicon Valley Group lithography installed base, integrated into ASML legacy lithography tool maintenance.

Q: Is direct replacement possible with similar cap gauge part numbers? A: No, equivalent part numbers carry different calibration and mounting parameters; the exact part and revision must be matched before installation.