Sale!

ASML 865-8084-004 SVG Legacy Lithography A Board

Parameter Value
Part Number 865-8084-004
Designation A Board, Control PCB Board
Product Type Plug-in electronic control circuit board
Origin Family SVG Silicon Valley Group, ASML legacy lithography installed base
Categories: , , , , Brand:

Description

Core Product Summary

ASML 865-8084-004, also known as the A Board, is a printed circuit control board originating from SVG Silicon Valley Group, designed for legacy semiconductor lithography systems. It delivers core control and signal processing functions for the host lithography platform during wafer exposure sequences.

This board is a rack-mounted plug-in electronic spare. It interfaces with other system modules to route control signals, supporting the coordinated operation of stage, sensor, and actuator subsystems inside the lithography tool.

 

Key Technical Specifications

Parameter Value
Part Number 865-8084-004
Designation A Board, Control PCB Board
Product Type Plug-in electronic control circuit board
Origin Family SVG Silicon Valley Group, ASML legacy lithography installed base

 

Detailed Product Overview

ASML 865-8084-004 is a dedicated control PCB built for SVG lithography systems. It acts as a signal processing and control intermediary between the main machine controller and subordinate hardware subsystems, enabling synchronized execution of positioning, sensing, and actuation tasks for wafer patterning.

The board is engineered as a field-replaceable plug-in module. During maintenance, technicians swap this board to resolve communication or control faults without full disassembly of surrounding mechanical assemblies. Its internal circuitry is configured to match the signal timing and voltage definitions specific to the SVG tool architecture.

This spare supports ongoing fab uptime for older SVG lithography platforms. Exact part revision matching is required before installation. Different revisions carry modified component layouts, signal pin assignments, or firmware compatibility boundaries; mismatched revisions will prevent proper signal exchange and can introduce overlay or focus errors during production runs.

865-8084-004

865-8084-004

865-8084-004

865-8084-004

FAQ

Q: What is ASML 865-8084-004? A: It is an SVG-origin control PCB board, also called the A Board, used in legacy semiconductor lithography systems.

Q: What function does the 865-8084-004 board perform? A: It handles control signal processing and signal routing to coordinate stage, sensor and actuator subsystems within the lithography tool.

Q: Which equipment family is this part associated with? A: It belongs to the SVG Silicon Valley Group legacy lithography installed base.

Q: Is this board a general-purpose PLC module? A: No, it is application-specific hardware designed exclusively for SVG lithography control architecture.

Q: Can I install a different part number as a direct substitute? A: Substitution is not allowed. The exact part number and revision must be matched to the tool configuration.

Q: Does this board require post-replacement setup? A: System-level verification and alignment procedures for the host lithography tool are required after installation.