Sale!

Atlas Copco TC-4000-P-PB-ES PowerMACS 4000 Controller

Parameter Specification
Manufacturer Atlas Copco
Product family PowerMACS 4000
Model TC-4000-P-PB-ES
Ordering number 8435 6511 10
Controller role Primary controller
Application Fixed-station tightening and pressing systems
Fieldbus interface PROFIBUS
Rated power 500 W
Categories: , , , , SKU: TC-4000-P-PB-ES Brand:

Description

Core Product Summary

The Atlas Copco TC-4000-P-PB-ES is the primary controller in the PowerMACS 4000 system for fixed-station tightening and pressing applications. It combines process control, monitoring, and production-data handling in a standalone controller designed for industrial assembly systems.

This variant is equipped with a PROFIBUS fieldbus interface for communication with a higher-level automation system. The controller supports tightening-process monitoring and data collection for quality analysis, process improvement, and production traceability.

The manufacturer’s ordering number is 8435 6511 10. Its electrical rating is 380–480 V AC, three-phase, 50–60 Hz, with a rated power of 500 W.

 

Key Technical Specifications

Parameter Specification
Manufacturer Atlas Copco
Product family PowerMACS 4000
Model TC-4000-P-PB-ES
Ordering number 8435 6511 10
Controller role Primary controller
Application Fixed-station tightening and pressing systems
Fieldbus interface PROFIBUS
Rated power 500 W
Supply voltage 380–480 V AC
Supply configuration Three-phase AC
Supply frequency 50–60 Hz
Protection rating IP43
Operating temperature 5 to 50 °C
Storage temperature 5 to 50 °C
Height 316 mm
Length 298 mm
Width 146 mm
Weight Approximately 8 kg
Country of origin Sweden

 

Detailed Product Overview

Primary Process Control for PowerMACS 4000

The TC-4000-P-PB-ES is designed to act as the primary controller in a PowerMACS 4000 fixtured assembly system. It coordinates tightening and pressing processes, monitors process results, and provides the communication interface between the assembly system and the plant-level control network.

The primary-controller architecture is intended for applications where process parameters and fastening results need to be managed centrally. Captured process data can support quality evaluation, production analysis, and traceability.

PROFIBUS Communication

The PB designation identifies the PROFIBUS fieldbus version. This allows the controller to exchange process and status information with compatible automation equipment through a PROFIBUS network.

When integrating the controller, verify the PLC’s PROFIBUS configuration, network addressing, communication parameters, and the applicable PowerMACS configuration. The exact data exchange and supported functions depend on the system configuration and controller software.

Integrated Control and Monitoring Functions

The PowerMACS 4000 platform provides functions for managing tightening strategies and evaluating process results. Platform features include:

  • Integrated display for controller information and operating status.
  • Embedded hardware PLC.
  • Reject management for handling unsuccessful tightening operations.
  • Configurable tightening strategies.
  • Process-data collection for analysis and traceability.
  • Integrated emergency-stop relay functionality.
  • Ethernet switch in the ES controller configuration.

The primary controller also provides opto-isolated digital inputs and outputs. The published platform information specifies four inputs and four outputs, with 24 V available for external use.

Role in an Assembly System

A PowerMACS 4000 installation can include primary and secondary controllers, tightening tools, power distribution equipment, and associated cables. The primary controller handles external communication and system-level process coordination.

The TC-4000-P-PB-ES should therefore be selected as part of the complete PowerMACS configuration rather than treated as a standalone general-purpose PLC.

TC-4000-P-PB-ES

TC-4000-P-PB-ES

System Compatibility & Integration Requirements

The TC-4000-P-PB-ES belongs to the Atlas Copco PowerMACS 4000 controller family. Its primary-controller role and PROFIBUS interface distinguish it from secondary-controller variants and primary controllers configured for other fieldbus protocols.

System element Integration consideration
PowerMACS 4000 system Intended controller platform
Plant PLC PROFIBUS communication configuration required
Secondary controllers Confirm system architecture and controller allocation
Tightening equipment Confirm tool and controller configuration
Power distribution Verify three-phase 380–480 V AC supply
Emergency-stop circuit Verify the required safety architecture and wiring
Digital I/O Published platform configuration includes 4 inputs and 4 outputs

Important compatibility checks

  1. Confirm the installed system uses the PowerMACS 4000 platform.
  2. Confirm that PROFIBUS is the required fieldbus protocol.
  3. Check the controller’s full model designation and ordering number.
  4. Verify the supply voltage and three-phase power connection before installation.
  5. Confirm the emergency-stop arrangement and safety requirements for the complete machine.
  6. Check software and configuration compatibility before replacing a controller.

A controller with a different fieldbus suffix should not be assumed to be a direct replacement. For example, an Ethernet/IP or PROFINET version has a different communication interface from this PROFIBUS model.

 

Dimensions, Mounting & Connection Notes

The manufacturer lists the controller dimensions as 316 × 298 × 146 mm (height × length × width), with a weight of approximately 8 kg.

Before installation or replacement:

  • Confirm the available mounting space and cable access.
  • Check the three-phase supply against the controller’s 380–480 V AC rating.
  • Verify the PROFIBUS connection and network configuration.
  • Check the Ethernet switch and emergency-stop connections within the system architecture.
  • Allow suitable ventilation and maintain the specified operating-temperature range.
  • Follow the machine’s electrical isolation and safety procedures before disconnecting the controller.

The published protection rating is IP43. This should be considered when determining the controller’s installation environment; it does not indicate suitability for unrestricted washdown or outdoor exposure.

 

Frequently Asked Questions

Q1: What is the Atlas Copco TC-4000-P-PB-ES?

It is a PowerMACS 4000 primary controller used in fixed-station industrial tightening and pressing systems.

Q2: What does PB mean in the model number?

PB identifies the PROFIBUS fieldbus version, which is used for communication with compatible plant automation equipment.

Q3: What is the ordering number?

The manufacturer’s ordering number is 8435 6511 10.

Q4: What power supply does this controller require?

The specified supply is three-phase AC, 380–480 V, at 50–60 Hz. The rated power is 500 W.

Q5: Does the TC-4000-P-PB-ES include digital I/O?

The published PowerMACS 4000 primary-controller information specifies four opto-isolated digital inputs and four digital outputs, with 24 V available for external use.

Q6: What is the difference between the primary and secondary PowerMACS 4000 controllers?

The primary controller handles external fieldbus communication and system-level coordination. Secondary controllers are used as additional controllers within the system configuration.

Q7: Can another TC-4000-P variant replace this PROFIBUS model?

Not automatically. Other variants use different fieldbus interfaces, such as DeviceNet, Ethernet/IP, Modbus TCP, or PROFINET. Replacement requires confirmation of the plant communication architecture and system configuration.

Q8: What should be checked before ordering a replacement?

Confirm the complete model number, ordering number 8435 6511 10, PROFIBUS interface, supply rating, and compatibility with the installed PowerMACS 4000 system.