Sale!

Bachmann MPC270 Processor Module for M1 System

  • Model: MPC270
  • Brand: Bachmann
  • Series: M1 / MPC200
  • Core Function: Central processing unit / CPU module
  • Product Type: Processor Module
  • Key Specs: 700 MHz Celeron/Pentium III architecture; 128 MB DRAM; dual Ethernet; serial & USB interfaces
  • Condition: New Original / New Surplus
Categories: , , , , SKU: MPC270 Brand:

Description

3. Key Technical Specifications

  • Processor: Celeron / Pentium III architecture, 700 MHz
  • Working memory (DRAM): 128 MB
  • Retentive data memory: 512 kB battery-backed SRAM + 64 kB nvRAM
  • Program / system memory: Internal Flash (typically 8 MB total, portion reserved for system software)
  • Mass storage: CompactFlash slot supported on many variants
  • Interfaces:
    – 2 × 10/100 Base-TX Ethernet
    – 1 × RS232
    – 1 × RS232/422/485
    – 1 × USB
  • Power supply: Via system backplane (5 V and ±15 V)
  • Operating temperature: 0 °C to +60 °C (fanless)
  • Storage temperature: –40 °C to +85 °C
  • Relative humidity: 5 % to 95 % (non-condensing)
  • Additional features: Watchdog timer, real-time clock with battery, status LEDs, CPU-ID selection via rotary switches, synchronization pulse for fieldbus
  • Note: Exact memory configuration, CompactFlash size, and any “/W” or cold-climate variants must be verified against the unit label.

4. Product Introduction

The Bachmann MPC270 is a high-performance processor module designed for the M1 automation platform. It serves as the central CPU that executes real-time control programs, manages communication with I/O modules, and handles data exchange with higher-level systems.

Engineers select the MPC270 for demanding industrial applications that require reliable processing power, multiple communication interfaces, and fanless operation in control cabinets. It is commonly used in energy, manufacturing, and process automation environments where long-term availability of spare parts is critical.

MPC270

MPC270

MPC270

MPC270

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
System does not boot Faulty CPU module or backplane power ✅ High Check power LEDs and status indicators Reseat module; verify backplane voltages; replace if power is confirmed good
No Ethernet or serial communication Interface configuration or hardware fault ✅ High Verify cable integrity and port settings Test with known-good cables; check configuration
Intermittent resets or freezes Overheating, failing memory, or watchdog trigger ✅ Medium Monitor module temperature and diagnostic logs Ensure adequate ventilation; replace module if faults persist
Module not recognized by engineering software Wrong firmware or hardware mismatch ✅ High Read module identification via Bachmann tools Confirm exact model and firmware version match the project
Status LEDs indicate error Internal self-test or configuration failure ✅ High Note exact LED pattern and error codes Document codes and replace the module after ruling out external causes

If diagnostics remain inconclusive, photograph the module (including labels and LEDs), note any CompactFlash or suffix information, and contact technical support with system details.

6. Frequently Asked Questions (FAQ)

Q: What is the primary role of the Bachmann MPC270?
A: It is the central CPU / processor module for Bachmann M1 automation systems. It runs the control application and manages communication with I/O and higher-level systems.

Q: What processor does the MPC270 use?
A: It is based on a Celeron / Pentium III architecture running at 700 MHz.

Q: Does the module require external power?
A: No. Power is supplied through the M1 system backplane (5 V and ±15 V).

Q: Are there different memory variants?
A: Yes. Some units are ordered with specific CompactFlash sizes (for example, 512 MB or 4 GB). Always match the exact configuration of the installed module.

Q: Can the MPC270 be used in fanless cabinets?
A: Yes. It is designed for fanless operation within the specified temperature range.

Q: Is the MPC270 still supported?
A: It belongs to a mature platform. New Surplus units remain available for maintenance of existing installations. For new projects, Bachmann recommends evaluating current M1 or M100 series CPUs.

Q: What condition and warranty do you offer?
A: We supply New Original / New Surplus stock. Units are inspected for basic functionality. Standard coverage is a 1-year warranty against defects. Provide the complete model MPC270 (and any memory or variant suffix) when ordering or requesting support.