Sale!

Basler SCA1390-ABB Scout Series Industrial CCD Camera

The Basler SCA1390-ABB is an industrial area-scan camera from the Scout series that uses a Sony ICX267 progressive-scan CCD sensor. It delivers a resolution of 1392 × 1040 pixels at a maximum frame rate of 17 frames per second.

Categories: , , , , SKU: SCA1390-ABB Brand:

Description

Core Product Summary

The Basler SCA1390-ABB is an industrial area-scan camera from the Scout series that uses a Sony ICX267 progressive-scan CCD sensor. It delivers a resolution of 1392 × 1040 pixels at a maximum frame rate of 17 frames per second.

The camera features a 1/2-inch optical format, 4.65 µm × 4.65 µm pixel size, global shutter, and C-mount lens interface. It supports standard machine-vision protocols and is designed for compact integration in automated inspection, measurement, and quality-control systems. Power is typically supplied at 12–24 VDC with low consumption.

 

Key Technical Specifications

Parameter Value
Product Type Area-scan industrial CCD camera
Series Basler Scout
Resolution 1392 × 1040 pixels
Maximum Frame Rate 17 fps (full resolution)
Sensor Sony ICX267 progressive-scan CCD
Optical Format 1/2 inch
Pixel Size 4.65 µm × 4.65 µm
Shutter Type Global
ADC Bit Depth 12 bits
Lens Mount C-mount
Housing Dimensions (L × W × H) 73.7 × 44 × 29 mm (standard, without connectors/adapter)
Typical Weight 160 g
Power Supply 12–24 VDC
Typical Power Consumption ≈ 3.5 W (GigE variants)
Operating Temperature 0 °C to 50 °C
Digital I/O 2 inputs / 4 outputs (opto-isolated)

 

Detailed Product Overview

The SCA1390-ABB belongs to Basler’s Scout family of compact industrial cameras built around selected high-quality CCD sensors. The Sony ICX267 sensor provides progressive-scan readout with global shutter, making the camera suitable for capturing moving objects without distortion.

Image data can be output at up to 12-bit depth. The camera supports standard features of the Scout series including programmable exposure, gain and black-level adjustment, area-of-interest (AOI) definition, external trigger or free-run acquisition, and opto-isolated digital I/O for machine synchronization. Encoder or PLC integration is supported through the trigger and I/O lines.

The compact housing (approximately 74 × 44 × 29 mm) and C-mount interface allow straightforward mechanical integration into existing vision systems. Power and data interfaces follow the Scout series conventions (GigE Vision or IEEE 1394b depending on exact configuration). The design emphasizes consistent factory calibration and compliance with GenICam and related machine-vision standards.

Because the exact “ABB” suffix is not listed in current Basler public catalogs for the active product line, users should verify the precise interface (GigE or FireWire), monochrome/color status, and firmware revision against the unit’s label or documentation when integrating the camera.

SCA1390-ABB

SCA1390-ABB

SCA1390-ABB

SCA1390-ABB

Dimensions, Mounting & Connection Notes

Standard housing size is 73.7 mm (L) × 44 mm (W) × 29 mm (H) without lens adapter or connectors. With lens adapter and connectors the length increases to approximately 85.5 mm. Weight is typically 160 g.

The camera is intended for fixed mounting in industrial environments. Operating temperature range is 0 °C to 50 °C. A C-mount lens is required. Digital I/O and power connections use the standard Scout series connectors.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Camera Family Basler Scout series Shares mechanical and electrical design with scA1390-17 models
Sensor Sony ICX267 CCD Progressive scan, global shutter
Lens C-mount CS-mount optional on some Scout variants
Power 12–24 VDC Supplied via interface cable or dedicated power connector
I/O 2 opto-isolated inputs, 4 opto-isolated outputs For trigger, strobe, and status signaling
Software Basler pylon SDK / GenICam compatible Supports Windows and Linux
Standards GenICam, GigE Vision (GigE variants) EMVA 1288 characterization available for the sensor family

 

FAQ

What is the Basler SCA1390-ABB?
It is a Scout series industrial area-scan CCD camera offering 1392 × 1040 resolution at up to 17 frames per second.

What sensor does the SCA1390-ABB use?
It uses the Sony ICX267 progressive-scan CCD sensor with 4.65 µm pixels and a 1/2-inch optical format.

What is the maximum frame rate?
17 frames per second at full 1392 × 1040 resolution.

What lens mount is used?
C-mount (CS-mount optional on some related Scout models).

What power supply is required?
12–24 VDC; typical consumption is approximately 3.5 W for GigE versions.

Is the SCA1390-ABB still an active Basler catalog model?
The core scA1390-17 family has been discontinued by Basler; the SCA1390-ABB appears in the surplus and replacement market as a specific configuration of that design. Verify the exact interface and revision on the individual unit.