WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
Key Technical Specifications
- Part Number: 330130-045-00-00
- Manufacturer: Bently Nevada (GE)
- Product Family: 3300 XL, 3300XL, 3300-XL
- Product Type: 3300 XL Standard Extension Cable
- Cable Length: 4.5 metres (14.8 feet)
- Cable Length Code: 045 = 4.5 m
- Probe System: 3300 XL 8 mm proximity transducer
- Connector Type: Standard cable connector (gold-plated brass/beryllium copper)
- Operating Temperature: -52°C to +177°C (-62°F to +350°F)
- Connector Material: Gold-plated brass or gold-plated beryllium copper
- Standards Compliance: API 670 Standard (4th Edition)
- Country of Origin: United States (USA)
- Application: Vibration and position measurement on fluid-film bearing machines
-
- 330130-045-00-00
Product Introduction
Bently Nevada 330130-045-00-00 is a 3300 XL 8 mm standard extension cable for proximity transducer systems. It connects the proximitor sensor to the probe in vibration and position monitoring applications for rotating machinery.
This cable is chosen when exact OEM part matching is required for 3300 XL system compatibility. Buyers source 330130-045-00-00 for API 670 compliance, verified 8 mm system interchangeability, and a direct swap path without bench calibration.
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| No vibration/position signal | Cable disconnect, broken conductor, or connector fault | ✅ High | Measure continuity from proximitor end to probe end with multimeter | Replace cable if continuity fails; check connectors for damage |
| Signal noise or drift | Cable damage, shielding issue, or loose connection | ✅ High | Inspect cable for cuts/cracks, check shield grounding at both ends | Reseat connectors, repair shielding, or replace cable if damage found |
| Erratic readings at high speed | Cable intermittent due to vibration or flex stress | ✅ High | Tap-test cable while machine runs, check for signal spikes | Replace cable with shorter/protected run if intermittent persists |
| Proximitor LED off or fault | Cable open circuit or power feed interrupted | ✅ High | Check 24 VDC at proximitor terminals, measure cable resistance | Verify power supply first, then test cable continuity |
| Reading shows fixed offset | Probe misalignment or cable termination issue | ❌ Low | Check probe target gap, verify cable connector is fully seated | Realign probe and reseat connector before replacing cable |
| Intermittent Keyphaser signal | Cable damage at Keyphaser input path | ✅ Medium | Trace cable from Keyphaser probe to input card, check continuity | Replace cable if Keyphaser path shows open/intermittent |
Contact technical support with photos of cable ends, connector condition, and any oscilloscope traces if the fault stays unclear.
Frequently Asked Questions
Q: Is 330130-045-00-00 still available from Bently Nevada?
A: Yes, it is a current 3300 XL part. Stock is available and ships same day from surplus and authorized distributors.
Q: What does the “045” in the part number mean?
A: 045 = 4.5 metres (14.8 feet) cable length. Other length codes include 040 (4.0 m), 080 (8.0 m), etc.
Q: Can I mix 3300 XL and non-XL 3300 components?
A: Yes, 3300 XL and non-XL 5 mm/8 mm components are physically and electronically interchangeable. However, system performance is limited to non-XL standards when mixed.
Q: Is this cable API 670 compliant?
A: Yes, the 3300 XL 8 mm system fully complies with API 670 Standard (4th Edition) for mechanical design, linear range, accuracy, and temperature stability.
Q: Do I need to calibrate this cable on-site?
A: No. The 3300 XL 8 mm system offers full interchangeability of probes, extension cables, and proximitor sensors without component matching or bench calibration.
Q: What temperature range can this cable handle?
A: Operating and storage temperature is -52°C to +177°C (-62°F to +350°F) for the standard cable.
Q: Can I use this cable with 5 mm probes?
A: No, this is an 8 mm system cable. Use the 3300-series 5 mm probe cable (e.g., 141605-01) for 5 mm applications.
Q: What connector material is used?
A: Gold-plated brass or gold-plated beryllium copper for reliable conductivity and corrosion resistance.
Q: What warranty is included?
A: A 1-year warranty is standard for this cable. Verify exact terms with the supplier before purchase.
Q: Is this cable suitable for overspeed protection applications?
A: Yes, the 3300 XL system can be used for tachometer or overspeed measurements, but review Bently Nevada guidance on eddy current proximity probes for overspeed protection before deployment.
