Sale!

Berger Lahr VRDM 397/50 LWB 3-Phase Stepper Motor

Parameter Berger Lahr VRDM 397/50 LWB
Manufacturer Berger Lahr
Product family VRDM 3xx three-phase stepping motors
Model designation VRDM 397/50 LWB
Motor type Three-phase stepping motor
Frame size Size 90
Number of steps 200 / 400 / 500 / 1,000 steps per revolution
Step angle 1.8° / 0.9° / 0.72° / 0.36°
Maximum torque 2.0 Nm
Holding torque 2.26 Nm
Categories: , , , , SKU: VRDM 397/50 LWB Brand:

Description

Core Product Summary

The Berger Lahr VRDM 397/50 LWB is a three-phase stepping motor from the Berger Lahr VRDM 3xx motor family. It is designed for positioning applications controlled by a compatible Berger Lahr three-phase stepping drive.

This size 90 motor provides a maximum torque of 2.0 Nm and a holding torque of 2.26 Nm. It has a 12 mm shaft, a 110 mm motor-body length, and a mass of 2.05 kg. The motor supports 200, 400, 500, or 1,000 steps per revolution, corresponding to step angles of 1.8°, 0.9°, 0.72°, and 0.36° depending on the configured drive setting.

 

Key Technical Specifications

Parameter Berger Lahr VRDM 397/50 LWB
Manufacturer Berger Lahr
Product family VRDM 3xx three-phase stepping motors
Model designation VRDM 397/50 LWB
Motor type Three-phase stepping motor
Frame size Size 90
Number of steps 200 / 400 / 500 / 1,000 steps per revolution
Step angle 1.8° / 0.9° / 0.72° / 0.36°
Maximum torque 2.0 Nm
Holding torque 2.26 Nm
Mass moment of inertia 1.1 kg·cm²
Motor mass 2.05 kg
Shaft diameter 12 mm
Motor-body length 110 mm
Manufacturer part number 8611-028-06
Drive compatibility Berger Lahr D 901 or WD3-004 power drive for VRDM 39…LW motors
Drive DC-bus voltage class 325 VDC
Drive output current class 1.8 A for the WD3-004 power output stage
Optional equipment Plug connector, encoder, and brake available as options

 

Engineering Selection Highlights

  • The VRDM 397/50 LWB is a three-phase stepping motor, so it must be paired with a drive designed for Berger Lahr three-phase VRDM 39…LW motors rather than a two-phase stepper drive.
  • Its 2.0 Nm maximum torque and 2.26 Nm holding torque define the torque capacity available for positioning and holding duties.
  • The motor supports 200, 400, 500, or 1,000 steps per revolution; the selected step count determines the resulting step angle from 1.8° to 0.36°.
  • The 12 mm shaft and 110 mm body length are key mechanical-fit dimensions for coupling, gearbox, bracket, and mounting-plate selection.
  • The 1.1 kg·cm² rotor inertia should be included in load-inertia calculations when selecting acceleration performance and drive sizing.
  • The LWB designation identifies the motor variant within the VRDM 397/50 family; encoder and brake are optional equipment and must not be assumed unless present on the installed motor.
  • Berger Lahr documentation identifies the D 901 or WD3-004 drive family for size 90, 325 V VRDM 39…LW motors, making drive compatibility a primary selection constraint.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Motor family Berger Lahr VRDM 3xx three-phase stepping motors The motor belongs to the VRDM 3xx product family.
Drive compatibility Berger Lahr D 901 or WD3-004 power drive These drives are documented for size 90, 325 V VRDM 39…LW motors.
Drive DC-bus voltage 325 VDC class The drive provides the link between the positioning unit and the three-phase stepping motor.
Step resolution 200 / 400 / 500 / 1,000 steps per revolution Step count and step angle are configured through the drive system.
Optional encoder Available as an option Confirm whether the installed motor includes an encoder before selecting feedback-dependent control functions.
Optional brake Available as an option Confirm whether the installed motor includes a brake before sizing power, wiring, and mechanical interfaces.
Connection Plug connector available as an option Confirm the installed connector arrangement before ordering cables or mating connectors.
VRDM 397/50 LWB

VRDM 397/50 LWB

VRDM 397/50 LWB

VRDM 397/50 LWB

Dimensions, Mounting & Connection Notes

  • The motor has a 12 mm shaft diameter.
  • The motor-body length is 110 mm.
  • The motor mass is 2.05 kg.
  • The rotor mass moment of inertia is 1.1 kg·cm².
  • The motor is available with a plug connector; encoder and brake are optional equipment.
  • The mounting interface and connector pin assignment should be confirmed from the installed motor’s nameplate, drawing, and drive documentation before mechanical or electrical installation.

 

Detailed Product Overview

The Berger Lahr VRDM 397/50 LWB is a size 90, three-phase stepping motor in the VRDM 3xx family. It is intended to operate with Berger Lahr power drives that control three-phase VRDM 39…LW motors, including the D 901 and WD3-004 drive families. In this architecture, the drive provides the link between a digital positioning unit and the motor.

The motor provides a maximum torque of 2.0 Nm and a holding torque of 2.26 Nm. Its rotor has a mass moment of inertia of 1.1 kg·cm², and the motor weighs 2.05 kg. These values are relevant when calculating acceleration capability, reflected load inertia, and mechanical duty for a positioning axis.

The VRDM 397/50 LWB supports 200, 400, 500, or 1,000 steps per revolution. At these settings, the corresponding step angles are 1.8°, 0.9°, 0.72°, and 0.36°. The selected resolution is established through the associated drive system, so the same motor can serve different positioning-resolution requirements when paired with a compatible drive.

Mechanically, the motor has a 12 mm shaft and a 110 mm body length. These dimensions are important for shaft coupling, gearbox mounting, bearing alignment, and frame installation. The motor is available with a plug connector, and encoder and brake functions are available as options. A motor fitted with an encoder or brake has additional wiring, power, and control requirements that must be accounted for in the drive and cabinet design.

Berger Lahr documentation identifies the D 901 and WD3-004 power drives for size 90, 325 V VRDM 39…LW motors. The WD3-004 power output stage is documented at 1.8 A and 325 V for this motor class. The drive controls phase current, step count, current reduction, gate/enable status, and microstepping functions, so final torque and motion performance are determined by the complete motor-drive configuration.

The VRDM 397/50 LWB should be selected and commissioned as part of a matched Berger Lahr motor-and-drive system. Its torque capacity, inertia, shaft dimensions, optional feedback equipment, and drive settings must all be compatible with the connected mechanical load and positioning controller.

 

Applications & System Role

The VRDM 397/50 LWB serves as the electromechanical actuator in a Berger Lahr three-phase stepping-drive system. The drive receives positioning commands from a digital positioning unit, controls the motor phases, and converts electrical commands into controlled shaft rotation.

The motor is suited to positioning duties where its 2.0 Nm maximum torque, 2.26 Nm holding torque, 12 mm shaft, and 110 mm body length match the mechanical load and drive configuration. Its optional encoder and brake make it adaptable to applications requiring position feedback or a holding function, provided those options are actually fitted.

Because it is a stepper motor, its usable torque depends on speed, drive current, supply conditions, and load inertia. The drive and motor should therefore be selected as a matched system rather than by motor torque alone.

 

FAQ

What is the Berger Lahr VRDM 397/50 LWB?
It is a size 90, three-phase stepping motor from the Berger Lahr VRDM 3xx family.

How much torque does it provide?
It provides 2.0 Nm maximum torque and 2.26 Nm holding torque.

What step resolutions does it support?
It supports 200, 400, 500, or 1,000 steps per revolution, corresponding to 1.8°, 0.9°, 0.72°, and 0.36° step angles.

What are its main mechanical dimensions?
It has a 12 mm shaft diameter and a 110 mm motor-body length.

Which drives are compatible with it?
Berger Lahr documentation identifies the D 901 and WD3-004 power drives for size 90, 325 V VRDM 39…LW motors.

Does it include an encoder or brake?
Encoder and brake are optional equipment. The installed motor must be checked for these options before selecting feedback or holding functions.

What is its rotor inertia?
The rotor mass moment of inertia is 1.1 kg·cm².