Description
Core Product Summary (Brand / Model / Key Attributes)
The Bosch Rexroth R901002090 (VT-VSPA2-1-20/V0/T1) is an analog amplifier card designed for controlling proportional directional and pressure valves without electrical position feedback. Formatted as a standard plug-in Eurocard, this module processes external set-point commands to regulate current-controlled output stages, driving proportional solenoids for hydraulic flow and pressure systems. It is commonly deployed across industrial fluid power applications utilizing valve series such as 4WRA, 4WRZ, and 3DREP.
The unit operates on a nominal 24 VDC power supply and incorporates differential voltage inputs, current loop capabilities (4 to 20 mA), and four callable command value inputs. It features an integrated single ramp generator (T1 option), characteristic curve correction, short-circuit-proof output stages, and a “Ready for operation” diagnostic output. Card configuration is managed via onboard potentiometers and jumpers for adjustment of parameters such as ramp times and current limits.
Key Technical Specifications
| Specification Parameter | Verified Technical Value |
| Brand / Series | Bosch Rexroth / VT-VSPA2-1 (Component Series 2X) |
| Part / Order Number | R901002090 |
| Model Designation | VT-VSPA2-1-20/V0/T1 |
| Product Type | Proportional Valve Analog Amplifier Card |
| Nominal Voltage Supply | 24 VDC (allowable range: 18 V to 33.6 V) |
| Command Inputs | Differential input (\pm 10 V), Current input (4–20 mA), Four callable command values (\pm 10 V) |
| Solenoid Output Current | Up to 2.5 A per output (short-circuit-proof) |
| Ramp Generation | Single adjustable ramp time (T1 version) |
| Form Factor | Standard Eurocard (3HE, 160 mm × 100 mm) |
| Operating Temperature Range | 0°C to +50°C |
Detailed Product Overview
The Bosch Rexroth R901002090 amplifier card serves as an intermediary control interface between higher-level automation controllers and electro-hydraulic proportional valves. By taking standard industrial command signals—such as \pm 10 V differential voltage or 4–20 mA current loops—the card computes an internal command value summation, applies customized ramp characteristics, and modulates current-controlled power output stages to drive valve solenoids accurately.
The module is structured around a standard 3HE Eurocard layout suited for integration into 19-inch racks or dedicated modular card holders (such as VT 12302 or VT3002 housings). Adjustments for zero point, amplitude, and ramp times are accessible via onboard hardware trimming elements. Furthermore, integrated fault monitoring circuitry and a dedicated “Ready for operation” status signal ensure safe loop behavior, de-energizing output stages automatically upon fault detection.
Engineering Selection Highlights
- Valve Series Compatibility: Engineered specifically to control proportional directional valves (such as 4WRA size 6 and 10, 4WRZ series 7X) and proportional pressure valves (such as 3DREP6).
- Flexible Command Integration: Accepts multiple concurrent command types, including \pm 10 V differential inputs, 4–20 mA loops, and four discrete externally callable command value presets.
- Ramp Generation (T1 Option): Features a built-in single ramp time configuration suitable for smoothing acceleration and deceleration steps in hydraulic actuation.
- Protected Output Stages: Incorporates short-circuit-proof current-regulated outputs limited to 2.5 A, safeguarding against wiring faults or solenoid anomalies.
- Standard Eurocard Form Factor: Adheres to standard 160 × 100 mm card dimensions, permitting straightforward replacement or retrofitting within existing industrial control racks.

R901002090 VT-VSPA2-1-20/V0/T1

R901002090 VT-VSPA2-1-20/V0/T1
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Supported Valve Types | 4WRA (Sizes 6 and 10, Series 2X), 4WRZ (Series 7X), 3DREP 6 (Series 2X) | Designed for proportional valves without electrical position feedback. |
| Card Holder / Rack | 19-inch rack systems, VT 12302, or VT3002-2X-48F open card holders | Requires appropriate backplane connector wiring according to the 2X component series spec. |
| Power Supply | Regulated 24 VDC source (18 V to 33.6 V limits) | Must account for total power consumption and current draw of connected valve solenoids. |
| Command Sources | PLC or controller analog outputs (\pm 10 V or 4–20 mA) | Shielded cabling is recommended for analog command lines to minimize electromagnetic interference. |
Dimensions, Mounting & Connection Notes
- Physical Dimensions: Standard Eurocard format measuring 160 mm × 100 mm × 22 mm (3HE front panel height).
- Net Weight: Approximately 0.17 kg.
- Mounting Requirements: Designed for installation in card racks, subracks, or enclosed modular mounting units designated for Eurocard modules.
- Environmental Limits: Operating temperature range spans from 0°C to +50°C; storage temperature limits range between -25°C and +85°C.
- Electrical Connection: Utilizes a standard multi-pin edge connector layout matching the VT-VSPA2-1 series pinout specification for power input, command references, sensor signals, and valve solenoid outputs.
FAQ
What is the Bosch Rexroth R901002090?
It is an analog electronic amplifier card (model VT-VSPA2-1-20/V0/T1) engineered to drive proportional hydraulic valves without electrical position feedback.
Which proportional valves are compatible with this amplifier?
It is designed to control Rexroth valve families including 4WRA (sizes 6 and 10), 4WRZ, and 3DREP6.
What power supply does the unit require?
It operates on a nominal 24 VDC supply voltage, with an acceptable operational range spanning from 18 V to 33.6 V.
What input signal types does the card support?
It supports a \pm 10 V differential input, a 4–20 mA current loop input, and four callable preset command value inputs.
What does the “T1” designation mean in the model code?
The T1 option indicates that the module is equipped with a single adjustable ramp time generator.
Verification & Troubleshooting Notes
- Fault Behavior: The internal card monitoring checks supply voltage levels and operational states. If a fault condition is detected, the output stage is automatically de-energized, and the “Ready for operation” output signal drops.
- Polarity Protection: The module includes built-in reverse polarity protection for the primary 24 VDC voltage supply to prevent accidental wiring damage.
- Adjustment Precautions: Use insulated alignment tools when adjusting onboard potentiometers (such as zero point, scale, and ramp settings) while the rack is energized, taking standard precautions around exposed backplane wiring.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626