Description
Core Product Summary
The Bosch Rexroth R901077297 is the material number for the VT-VSPD-1-2X/V0/0-0-1 digital valve amplifier. It controls proportional directional, pressure, and pressure-reducing valves that do not use electrical spool-position feedback.
The amplifier provides a configurable voltage or current command-value input, ramp generation, enable and fault functions, and digital inputs for selecting stored command-value parameter sets. It is configured with Bosch Rexroth BODAC software through a serial interface and mounts as a Euro-format circuit board in a compatible card holder. The module requires a 24 V DC supply and is intended for installation in a control cabinet.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bosch Rexroth |
| Material number | R901077297 |
| Type designation | VT-VSPD-1-2X/V0/0-0-1 |
| Product type | Digital valve amplifier |
| Application | Proportional valves without electrical position feedback |
| Component series | 2X |
| Output stage | With valve output stage |
| Display | Without display |
| Supply voltage | 24 V DC ±10% |
| Command-value input | Voltage or current interface; voltage input is differential |
| Parameter sets | Up to 16 stored command-value parameter sets |
| Parameter-set selection | Four binary-coded digital inputs |
| Local bus capacity | Up to 32 interconnected amplifiers |
| Configuration software | BODAC |
| Configuration interface | Serial interface at front-side D-Sub socket |
| Form factor | Euro-card format, 100 × 160 mm, with daughter board fitted on both sides |
| Control element | Microcontroller |
| Parameter storage | Nonvolatile FLASH memory |
| Mounting | Control-cabinet installation in a compatible card holder |
Engineering Selection Highlights
- R901077297 corresponds to VT-VSPD-1-2X/V0/0-0-1, the version with a valve output stage and no display; it must not be confused with the display-equipped R901161533 variant.
- The amplifier is intended for proportional valves without electrical position feedback, so it is not the correct selection for valves requiring closed-loop spool-position feedback.
- Its configurable voltage or current command input allows integration with analog control signals; the voltage input is differential, which supports noise-resistant signal wiring.
- Four binary-coded digital inputs select up to 16 stored command-value parameter sets, each with its associated ramp times, enabling predefined operating points from the control system.
- BODAC software is required for valve selection, command-value input configuration, ramp-generator setup, enable configuration, and parameter adjustment.
- The local bus supports interconnection of up to 32 amplifiers for parameterization and diagnostics, with each amplifier assigned a bus address in BODAC.
- The Euro-card board must be installed in a compatible card holder and only inside a control cabinet.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Valve type | Proportional valves without electrical position feedback | The amplifier is designed for open-loop proportional-valve control. |
| Directional valves | 4WRA 6 and 10, series 2X; 4WRZ 10 to 52, series 5X–7X | Valve selection and configuration are performed in BODAC. |
| Pressure valves | (Z)DBE 6 series 1X; DBE(M)T series 5X; DBE(M) 10, 25, and 32; DBEP 6 series 1X; DBET 6 series 6X | Confirm the exact valve series and configuration before parameterization. |
| Pressure-reducing valves | DRE 4 K series 3X; DRE(M) 10 and 25 series 5X; (Z)DRE 6 series 1X; ZDRE 10 series 1X/2X; 3DRE(M) 10 P and 16 P series 6X/7X; DRE(M) 32 series 4X; 3DREP 6 series 1X/2X | The amplifier supports these documented valve families without electrical position feedback. |
| Supply power | 24 V DC ±10% | The control-cabinet power supply must remain within this range. |
| Configuration software | BODAC, order code SYS-HACD-BODAC-01 / R900777335 | Required for configuration, parameterization, diagnostics, and valve selection. |
| Programming cable | VT-HACD-1X/03.0/HACD-PC, R900776897, or a commercial 1:1 cable | Connects the amplifier’s serial D-Sub interface to the configuration PC. |
| Card holder | VT 19101, VT 19102, VT 19103, VT 19110, VT 12302, VT 3002-2X/48F, VT 3002-2X/64G, or VT 10812-2X/64G adapter | The amplifier requires a compatible holder for cabinet installation. |
| Local bus | Up to 32 amplifiers | Each amplifier receives a bus address through BODAC. |
Dimensions, Mounting & Connection Notes
| Item | Specification |
|---|---|
| Board format | Euro-card format, 100 × 160 mm |
| Construction | Main circuit board with daughter board fitted on both sides |
| Installation location | Control cabinet only |
| Mounting requirement | Compatible Bosch Rexroth card holder or connection adapter |
| Command input | Configurable voltage or current interface; voltage input is differential |
| Digital inputs | Four binary-coded inputs for command-value parameter-set selection |
| Control functions | Enable input and fault output |
| Configuration connection | Serial interface at front-side D-Sub socket |
| Measuring connection | Freely configurable measuring socket X2 |
| Parameter storage | Nonvolatile FLASH memory |
Detailed Product Overview
The Bosch Rexroth R901077297 identifies the VT-VSPD-1-2X/V0/0-0-1 digital valve amplifier, component series 2X. It is a Euro-format printed-circuit amplifier designed to drive proportional valves that do not include electrical position feedback.
A microcontroller manages the amplifier’s signal processing and valve-output functions. Configuration data, command values, and parameters are retained in nonvolatile FLASH memory, allowing user-specific settings to be reproduced and protected against unintended or unauthorized changes.
The command-value input can be configured as either a voltage or current interface. When configured for voltage, the input is differential. The amplifier includes a ramp generator, variable input adjustment, enable input, fault output, and freely configurable measuring socket X2. For application-specific tuning, the output-stage frequency, biasing, surge and final current, and characteristic-curve correction with up to eight supporting points can be configured.
Four binary-coded digital inputs select stored command-value parameter sets. The amplifier can store up to 16 parameter sets, and selecting a set activates the associated command value for valve spool position together with its configured ramp times.
Configuration and diagnostics are performed through the front-side D-Sub serial interface using Bosch Rexroth BODAC software. BODAC is used to select the valve, configure the command-value input, ramp generator, and enable input, and assign command-value call-up parameters. A local bus allows up to 32 amplifiers to be interconnected for parameterization and diagnostics; each amplifier is assigned a bus address in BODAC, so the serial programming cable does not need to be reconnected for each unit.
The amplifier requires a 24 V DC ±10% supply and must be installed only in a control cabinet. It is fitted into a compatible Bosch Rexroth card holder or connection adapter, with several 19-inch rack, enclosed, and open card-holder options documented for the VT-VSPD-1 series.

R901077297

R901077297
Applications & System Role
The VT-VSPD-1-2X/V0/0-0-1 amplifier sits between the machine controller and a proportional hydraulic valve. It converts an analog command value into a controlled valve current, using configured ramps, biasing, output-stage settings, and characteristic-curve correction to shape the valve response.
Because it is intended for valves without electrical position feedback, the amplifier provides open-loop proportional control of the valve solenoid rather than closed-loop spool-position regulation. It is suited to hydraulic directional, pressure, and pressure-reducing valve functions where the commanded valve setting is determined by the analog command signal and configured amplifier parameters.
FAQ
What is Bosch Rexroth R901077297?
R901077297 is the Bosch Rexroth material number for the VT-VSPD-1-2X/V0/0-0-1 digital valve amplifier for proportional valves without electrical position feedback.
Which valve types does the R901077297 control?
It controls documented proportional directional, pressure, and pressure-reducing valve families without electrical position feedback, including 4WRA, 4WRZ, DBE/DBET, DBEP, DRE, ZDRE, and 3DRE/3DREP types within their specified component series.
What supply voltage does it require?
The amplifier requires a 24 V DC supply with a ±10% tolerance.
How is the R901077297 configured?
It is configured and parameterized through the BODAC PC software using the amplifier’s front-side D-Sub serial interface.
How many command-value parameter sets can it store?
It can store up to 16 command-value parameter sets, selected through four binary-coded digital inputs.
Can multiple R901077297 amplifiers be networked?
Yes. Up to 32 amplifiers can be interconnected through the local bus for parameterization and diagnostics.
Does it include a display?
No. R901077297 is the VT-VSPD-1-2X/V0/0-0-1 version without a display. The display-equipped variant is VT-VSPD-1-2X/V0/1-0-1, material number R901161533.
What mounting hardware is required?
The Euro-card amplifier must be installed in a compatible Bosch Rexroth card holder or connection adapter and only inside a control cabinet.
15 个来源

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626