Description
Core Product Summary
The Bosch Rexroth Indramat RAC 2.2-250-460-A00-W1 is an AC main-spindle drive controller from the RAC Spindle Drive Controllers family. It is designed for spindle applications using Indramat 2AD main-spindle motors and accepts an analog ±10 V speed-command signal from a CNC or PLC.
The controller is rated for 250 A and operates from 3 × AC 400 V, 50 Hz ±15%, or 3 × AC 460 V. It uses internal blower cooling, provides a 9-pole X4 control interface, and is configured without a second encoder input or additional bleeder resistor. The designation can also be written as RAC2.2-250-460-A00-W1.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bosch Rexroth / Indramat |
| Model | RAC 2.2-250-460-A00-W1 |
| Alternative written form | RAC2.2-250-460-A00-W1 |
| Product type | AC main-spindle drive controller |
| Product family | RAC Spindle Drive Controllers |
| Rated current | 250 A |
| Rated connection voltage | 3 × AC 400 V, 50 Hz ±15%, or 3 × AC 460 V |
| Speed command value | Analog, ±10 V |
| Second encoder input | Without second encoder input |
| Additional interfaces | Without additional interfaces |
| Additional bleeder | Without additional bleeder |
| Cooling | Internal blower |
| Control interface | X4 terminal, 9 poles |
| Motor family | Indramat 2AD main-spindle motors |
| Hardware generation | Series 2, version 2 |
Engineering Selection Highlights
- The RAC 2.2-250-460-A00-W1 is a 250 A AC main-spindle drive controller, so motor current, duty cycle, and spindle-drive sizing must be checked against this rating.
- It accepts a ±10 V analog speed command, making it suitable for CNC or PLC architectures that provide an analog spindle-speed reference.
- The controller supports 3 × AC 400 V at 50 Hz ±15% or 3 × AC 460 V, allowing selection based on the available machine supply without changing parameters.
- The A00 configuration means analog speed command, no second encoder input, and no additional interfaces; applications requiring encoder feedback pass-through need the A0I variant instead.
- The W1 configuration means no additional bleeder resistor, so braking capability and regeneration requirements must be evaluated within the drive system design.
- Internal blower cooling is built into the unit, so cabinet airflow, clearance, and ambient conditions must support the drive’s cooling arrangement.
- The controller is intended for Indramat 2AD main-spindle motors; motor type, feedback arrangement, and power-section compatibility should be confirmed before substitution.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Drive family | Bosch Rexroth Indramat RAC Spindle Drive Controllers | The unit is an AC main-spindle drive controller within this family. |
| Motor compatibility | Indramat 2AD main-spindle motors | The RAC controller is designed for digitally managing these main-spindle motors. |
| Line supply | 3 × AC 400 V, 50 Hz ±15%, or 3 × AC 460 V | The connected supply must match one of these documented configurations. |
| Speed reference | Analog ±10 V command | The CNC or PLC must provide an analog speed setpoint. |
| Control interface | X4 terminal, 9 poles | Low-level control and speed-command wiring terminate at this interface. |
| Feedback configuration | No second encoder input | The A00 configuration does not include a second encoder input. |
| Braking configuration | No additional bleeder | The W1 configuration does not include an additional bleeder resistor. |
| Cooling | Internal blower | The drive uses an integrated blower for thermal management. |

RAC 2.2-250-460-A00-W1
Dimensions, Mounting & Connection Notes
| Item | Specification |
|---|---|
| Installation type | Cabinet-mounted AC main-spindle drive controller |
| Cooling method | Internal blower / built-in fan |
| Control terminal | X4, 9 poles |
| Speed-command interface | Analog ±10 V |
| Line connection | 3 × AC 400 V, 50 Hz ±15%, or 3 × AC 460 V |
| Configuration note | No additional bleeder resistor; no second encoder input |
Detailed Product Overview
The Bosch Rexroth Indramat RAC 2.2-250-460-A00-W1 is an AC main-spindle drive controller intended for spindle systems built around Indramat 2AD main-spindle motors. It belongs to the RAC Spindle Drive Controllers series and uses the RAC 2.2 hardware generation and version 2 configuration.
The model number defines its main operating envelope. The 250 field identifies a 250 A rated current. The 460 field identifies a supply configuration of 3 × AC 400 V at 50 Hz ±15% or 3 × AC 460 V. The A00 field defines an analog ±10 V speed command, no second encoder input, and no additional interfaces. The W1 field defines no additional bleeder resistor and internal blower cooling.
The controller receives its spindle-speed reference as an analog ±10 V signal through the 9-pole X4 control interface. This makes it suitable for CNC or PLC systems that issue spindle-speed commands through an analog output. The drive regulates the connected 2AD main-spindle motor and can support spindle position control and C-axis functionality within the documented RAC spindle-drive architecture.
The A00 configuration does not include a second encoder input. This is an important selection boundary: installations that require a second encoder input for spindle feedback or an additional motor-feedback source must use the appropriate RAC configuration, such as the A0P or A0Y variants defined in the RAC type-code structure.
The W1 configuration does not include an additional bleeder resistor. Braking and regeneration behavior therefore depend on the overall drive-system design and the capabilities of the connected spindle-drive system. Internal blower cooling is provided within the controller, so cabinet ventilation and installation conditions must accommodate the integrated cooling airflow.
Applications & System Role
The RAC 2.2-250-460-A00-W1 serves as the main-spindle drive controller in a machine-tool drive architecture. It receives an analog speed command from the CNC or PLC, regulates the spindle motor, and supplies controlled power to the connected Indramat 2AD main-spindle motor.
Its role is spindle speed and torque regulation rather than general-purpose axis servo control. The 250 A rating and 400/460 V AC supply configuration make it appropriate for main-spindle applications requiring substantial motor current, while the internal blower provides the drive’s forced-air cooling.
FAQ
What is the Bosch Rexroth RAC 2.2-250-460-A00-W1?
It is a Bosch Rexroth Indramat AC main-spindle drive controller rated 250 A for 3 × AC 400 V or 460 V supply, with analog ±10 V speed command and internal blower cooling.
Is RAC2.2-250-460-A0-W1 the same as RAC 2.2-250-460-A00-W1?
The designation RAC2.2-250-460-A0-W1 appears to be an abbreviated form of RAC 2.2-250-460-A00-W1. The official RAC type-code structure uses three characters after the voltage field: A00.
What motors does it control?
The RAC controller is designed for Indramat 2AD main-spindle motors.
What speed-command interface does it use?
It uses an analog ±10 V speed-command interface.
What supply voltage does it accept?
It accepts 3 × AC 400 V, 50 Hz ±15%, or 3 × AC 460 V.
Does it include a second encoder input?
No. The A00 configuration is specified without a second encoder input.
Does it include an additional bleeder resistor?
No. The W1 configuration is specified without an additional bleeder resistor.
How is the drive cooled?
The controller uses an internal blower, also described as a built-in fan.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626