Sale!

Bosch Rexroth SE311 SB System Box Tightening Controller

The Bosch Rexroth SE311 (part number 0 608 830 237) is a tightening controller designed for integration into the Bosch Rexroth Tightening System 300. It is inserted into a BT300 module carrier or SB301/SB305 system box and, together with a power module and tightening spindle, forms a complete screwdriving channel.

Categories: , , , , SKU: SE311 Brand:

Description

Core Product Summary

The Bosch Rexroth SE311 (part number 0 608 830 237) is a tightening controller designed for integration into the Bosch Rexroth Tightening System 300. It is inserted into a BT300 module carrier or SB301/SB305 system box and, together with a power module and tightening spindle, forms a complete screwdriving channel.

The unit controls and monitors the tightening process, performs system diagnostics, and supervises the individual components of the channel. It provides two digital inputs and two digital outputs that can be processed within the tightening program, an RS232 service interface, and front-panel status LEDs. Operating temperature range is 0 °C to 55 °C with fan, protection class is IP20 when installed in the BT300, and power requirements are 5 V at 1.7 A and 24 V at 2.0 A.

Key Technical Specifications

Parameter Specification
Product type Tightening controller (Schraubsteuerung)
Part number 0 608 830 237
System Bosch Rexroth Tightening System 300
Mounting BT300 module carrier or SB301/SB305 system boxes
Digital inputs 2
Digital outputs 2 (24 V, processable in tightening program)
Service interface RS232 (X6, 9-pin Sub-D)
Power requirements 5 V / 1.7 A; 24 V / 2.0 A
Ambient temperature 0 °C to 55 °C (with fan)
Relative humidity (operating) 20 % to 90 % non-condensing
Storage temperature –20 °C to 70 °C
Protection class IP20 (~ NEMA 1) when installed in BT300
Dimensions (W × H × D) 25.55 mm × 271 mm × 285 mm
Weight 1.4 kg

Engineering Selection Highlights

  • Forms one complete tightening channel when combined with a compatible power module and spindle, enabling modular expansion of multi-spindle systems.
  • Two digital inputs and two digital outputs are directly available for use inside the tightening program, supporting simple interlock or status signaling without external I/O modules.
  • RS232 interface (X6) allows connection of a programming device or SD301 for parameter transfer and diagnostics.
  • Must be fully inserted into a BT300 or SB301/SB305 housing and secured with the front knurled screws; incomplete insertion prevents reliable operation.
  • Power-down and discharge times (≥ 3 minutes after switching off the system box/carrier) must be observed before insertion or removal.
  • Front-panel LEDs provide immediate indication of ready state, system error, bypass mode, function test, and OK/NOK tightening results.
SE311

SE311

SE311

SE311

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System family Bosch Rexroth Tightening System 300 Designed exclusively for this platform
Housing / carrier BT300 module carrier or SB301/SB305 system boxes Module must be fully inserted and secured
Companion components Power module + tightening spindle Required to form a functional tightening channel
Multi-channel systems KE310 communication unit Required for multi-channel configurations
Programming / diagnostics BS300 software; RS232 (X6) or SD301 Used for configuration, parameter transfer, and monitoring
Digital I/O 2 inputs + 2 outputs (24 V) Processed inside the tightening program

Dimensions, Mounting & Connection Notes

Dimensions are 25.55 mm width (5 units) × 271 mm height (6 units) × 285 mm depth. Weight is 1.4 kg. The module is inserted into the designated slots of a BT300 module carrier or SB301/SB305 system box and secured by the front knurled screws so that the front panel sits flush.

Before insertion or removal the system box or carrier must be switched voltage-free and a discharge time of at least 3 minutes observed. Interface X6 is a 9-pin Sub-D connector for RS232 (programming device or SD301). Interface X7 provides the 24 V digital inputs and outputs. A battery is fitted for data retention; battery replacement requires prior data backup because stored data are lost when the battery is removed.

Detailed Product Overview

The Bosch Rexroth SE311 is a dedicated tightening controller for the System 300 family. It is a plug-in module that occupies one slot in a BT300 module carrier or an SB301/SB305 system box. When combined with a power module and a tightening spindle it constitutes a complete, independently monitored screwdriving channel.

The controller manages the entire tightening cycle: it starts the process according to the selected program, monitors torque and angle parameters in real time, evaluates the final result against the programmed limits, and reports OK or NOK status. Continuous diagnostic functions supervise the connected components and detect system faults, which are indicated by the front-panel LEDs. Two digital inputs and two digital outputs are available for direct use inside the tightening program, allowing simple interlocks, start signals, or status feedback without additional I/O hardware.

Configuration and program management are performed with the BS300 software via the RS232 interface (X6). The same interface also supports connection of an SD301 diagnostic unit. Power is supplied through the backplane of the carrier or system box (5 V at 1.7 A and 24 V at 2.0 A). The module operates in an ambient temperature range of 0 °C to 55 °C when the system is fan-cooled and carries an IP20 protection rating when correctly installed in the BT300.

Mechanical installation requires full insertion of the module and firm tightening of the front knurled screws. Safety instructions mandate that the carrier or system box be de-energized and that a minimum discharge time of three minutes be observed before any module is inserted or removed. A battery maintains data retention; replacement of the battery erases stored programs and parameters, so a backup must be performed first.

In single-channel applications the SE311 operates autonomously once programmed. In multi-channel systems a KE310 communication unit provides the necessary coordination. The compact form factor (25.55 × 271 × 285 mm) and defined slot compatibility simplify cabinet layout and spare-parts logistics for System 300 installations.

Applications & System Role

The SE311 serves as the control and monitoring unit for a single tightening channel within Bosch Rexroth System 300 installations. It executes the programmed tightening sequence, evaluates results (OK/NOK), performs continuous diagnostics on the channel components, and exchanges status information via the integrated digital I/O and RS232 interface.

Typical placement is inside a BT300 carrier or SB system box located in an assembly station or production cell. In multi-channel setups a KE310 communication unit coordinates several SE311 modules. The controller is intended for industrial screwdriving and fastening applications that require process monitoring, result evaluation, and system diagnostics.

FAQ

What is the Bosch Rexroth SE311?
It is a tightening controller (part number 0 608 830 237) that controls and monitors one screwdriving channel within the Bosch Rexroth Tightening System 300.

Which housings accept the SE311?
The module is designed for insertion into a BT300 module carrier or SB301/SB305 system boxes.

What additional components are required to form a working channel?
A compatible power module and a tightening spindle are required together with the SE311.

How many digital inputs and outputs does the SE311 provide?
It provides two digital inputs and two digital outputs that can be processed inside the tightening program.

What interface is used for programming and diagnostics?
An RS232 interface (X6, 9-pin Sub-D) is provided for connection of a programming device or an SD301.

What are the power supply requirements?
The module requires 5 V at 1.7 A and 24 V at 2.0 A, supplied via the carrier or system-box backplane.

What is the protection class of the SE311?
When correctly installed in a BT300 the protection class is IP20.