Sale!

Bosch Rexroth TVM2.2-050-220300-W1 Indramat Servo Power Supply Module

The Bosch Rexroth TVM2.2-050-220300-W1 (TVM 2.2-050-220/300-W1) is a servo power supply module from the Indramat TVM series, part of the legacy Indramat modular AC servo drive range now supported under the Bosch Rexroth brand. Its job is to convert three-phase AC mains power into the DC link and control voltages that Indramat servo drive modules need to operate.

Categories: , , , , SKU: TVM2.2-050-220300-W1 Brand:

Description

Core Product Summary

The Bosch Rexroth TVM2.2-050-220300-W1 (TVM 2.2-050-220/300-W1) is a servo power supply module from the Indramat TVM series, part of the legacy Indramat modular AC servo drive range now supported under the Bosch Rexroth brand. Its job is to convert three-phase AC mains power into the DC link and control voltages that Indramat servo drive modules need to operate.

The module accepts a three-phase input of AC 220 V at 50/60 Hz and produces a nominal 300 V DC bus, with a type current of 50 A. Because the supply feeds a shared DC bus, multiple servo drive axes can run from one TVM unit instead of individual supplies. Regenerative braking energy is absorbed by an integrated bleeder resistor system. Cooling is handled by a built-in blower, and the unit mounts vertically in a control cabinet with an IP10 protection rating.

 

Key Technical Specifications

Parameter Value
Product type Servo drive power supply module
Series / family Indramat TVM 2.2 (Bosch Rexroth)
Order code TVM2.2-050-220300-W1 (TVM 2.2-050-220/300-W1)
Three-phase input voltage AC 220 V, 50 to 60 Hz
Nominal DC bus voltage 300 V DC
Type current 50 A
Braking energy handling Integrated bleeder resistor system
Control electronics supply Separate single-phase AC mains connection
Cooling Built-in blower
Protection rating IP10
Mounting orientation Vertical, cabinet installation
Ambient operating temperature 5 to 45 °C
Maximum installation altitude 1000 m

 

Engineering Selection Highlights

  • 50 A type current on a 300 V DC bus — this defines the sizing boundary: the combined demand of all connected drive axes must stay within the supply’s rating.
  • Three-phase 220 V, 50/60 Hz input — confirm the cabinet mains matches this voltage class before ordering; the TVM 2.2 is not a universal-input device.
  • Shared DC bus architecture — one supply feeds multiple Indramat servo drive modules, so axis additions or removals change the load on this unit and should be rechecked against its 50 A rating.
  • Integrated bleeder resistor — regenerated energy from decelerating axes is burned off internally; applications with frequent or heavy regeneration should verify that the built-in bleeder capacity is sufficient.
  • Vertical mounting with internal blower cooling — the module depends on its own airflow, so cabinet mounting must preserve the specified orientation and clearance for heat dissipation.
  • IP10 enclosure rating — the unit is designed for installation inside a protected control cabinet, not for exposed or dusty environments.
TVM2.2-050-220300-W1

TVM2.2-050-220300-W1

TVM2.2-050-220300-W1

TVM2.2-050-220300-W1

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Drive system family Indramat modular AC servo drive systems Supplies the DC link for Indramat servo drive modules
Axes per supply Multiple drive modules on one shared DC bus Total connected-axis load must stay within the 50 A type current
Mains input Three-phase AC 220 V, 50 to 60 Hz Verify cabinet supply voltage class
DC bus output Nominal 300 V DC Match to drive modules rated for this DC link level
Control power Separate single-phase AC mains connection for control electronics Wired independently of the three-phase power input
Braking energy Integrated bleeder resistor system Absorbs regenerative energy from decelerating axes
Installation Vertical mounting in a control cabinet, IP10 Maintain specified orientation and cooling clearances
Environment 5 to 45 °C ambient, up to 1000 m altitude Derating considerations apply at installation sites outside these conditions

 

Dimensions, Mounting & Connection Notes

The TVM2.2-050-220300-W1 is built for vertical mounting inside a control cabinet and uses a built-in blower as its cooling method, so the mounting orientation and airflow paths in the cabinet directly affect heat dissipation. With an IP10 protection rating, the module is intended for the enclosed, protected environment of a cabinet rather than open installation. Installation sites should be within the 5 to 45 °C ambient temperature range and no higher than 1000 m above sea level. Power connections are made at the front of the module, and the control electronics are fed from a separate single-phase AC mains connection, distinct from the three-phase 220 V power input.

 

Detailed Product Overview

The TVM2.2-050-220300-W1 belongs to the Indramat TVM 2.2 generation of servo power supply modules, a product line from the era when Indramat was an independent drive manufacturer before its integration into Bosch Rexroth. The order code itself carries the key selection information: TVM 2.2 identifies the series and design generation, 050 denotes the 50 A type current, and 220/300 specifies the conversion pair — a 220 V three-phase AC input producing a 300 V DC bus output. The W1 suffix marks the module version.

Functionally, the module plays a role analogous to a central power unit in a modular drive lineup. Rather than each servo drive carrying its own rectifier and bulk capacitance, one TVM supply establishes the DC link for the whole group of drive modules mounted alongside it. This architecture reduces component count and lets the total installed drive power scale with the number of axes, provided their combined current draw respects the supply’s 50 A rating. The buffered DC bus also gives the drive modules a stable voltage reference, which matters for consistent servo performance across load changes.

Braking behavior deserves attention during selection. When servo axes decelerate, kinetic energy flows back through the drive modules onto the DC bus and raises its voltage. The TVM 2.2 counters this with an integrated bleeder resistor system that converts the surplus into heat. For machinery with high-inertia axes, frequent reversals, or short duty cycles, the regeneration load on the bleeder should be checked against the application’s duty profile, since the internal bleeder defines how much braking energy the supply can absorb on its own.

Installation conditions are equally concrete. The module is designed for vertical cabinet mounting with an IP10 protection rating, cooled by its own built-in blower. It operates in ambient temperatures from 5 to 45 °C and at installation sites up to 1000 m above sea level. The control electronics are powered from a separate single-phase AC mains connection, independent of the three-phase 220 V power input, which means commissioning requires both supply paths to be correctly wired before the drive system can be brought up.

For maintenance and procurement teams, the practical identification points are the code structure and the electrical fingerprints: a 50 A, 220 V-to-300 V conversion stage in the TVM family. When replacing a unit in an existing cabinet, the variant suffix and the auxiliary voltage arrangement must match the original module, since TVM versions differ in these details even when the base rating is identical.

 

Applications & System Role

In an Indramat modular servo architecture, the TVM 2.2 sits at the power stage foundation of the drive cabinet. It does not control a motor itself; instead, it rectifies the three-phase 220 V mains into a stabilized 300 V DC bus and distributes that power, along with control voltages, to the servo drive modules that actually regulate Indramat servo motors. Any machine built on the Indramat modular drive platform — multi-axis motion systems where several servo axes share one drive cabinet — is the functional fit scenario: presses, machining, packaging, and handling systems whose axis count and current draw fall within the 50 A supply rating. During axis deceleration, the drive modules return energy to the DC bus, and the TVM’s integrated bleeder resistor dissipates that excess so the bus voltage remains controlled.

 

FAQ

What is the Bosch Rexroth TVM2.2-050-220300-W1?
It is an Indramat TVM 2.2 servo power supply module, marketed under the Bosch Rexroth brand, that converts three-phase AC mains power into a 300 V DC bus for Indramat modular servo drive systems.

What does the TVM2.2-050-220300-W1 do?
It rectifies a three-phase 220 V AC, 50/60 Hz input into a nominal 300 V DC bus at 50 A type current, supplying both the DC link and control voltages so multiple Indramat servo drive modules can run from one unit.

What do the order code elements mean?
TVM 2.2 identifies the power supply series and generation, 050 denotes the 50 A type current, 220/300 specifies the 220 V AC input and 300 V DC bus output pair, and W1 marks the module version.

What input power does it require?
A three-phase AC 220 V supply at 50 to 60 Hz, plus a separate single-phase AC mains connection for the control electronics.

How is braking energy handled?
Regenerative energy returned to the DC bus by decelerating axes is dissipated by an integrated bleeder resistor system.

How is the module cooled and mounted?
It uses a built-in blower and is designed for vertical mounting inside a control cabinet with an IP10 protection rating.

What are its installation environment limits?
Ambient temperatures from 5 to 45 °C and installation altitudes up to 1000 m above sea level.

Can one TVM2.2 supply feed several axes?
Yes — the module provides a shared DC bus, so multiple Indramat servo drive modules can operate from a single supply, provided their combined current draw stays within the 50 A rating.