Description
Core Product Summary (Brand / Model / Key Attributes)
The Bosch Rexroth VT-HNC100-1-23/W-08-P-0 (also cataloged as VT-HNC100-1-23W-08-P-0) is a bus-compatible digital axis controller from the HNC100 series, manufactured by Bosch Rexroth / Indramat. Designed for closed-loop control of electro-hydraulic and electrical drives, this compact, wall-mounted processor unit manages precise position, velocity, pressure, and force profiles in machine tools, industrial presses, plastics machinery, and automated transfer lines.
This specific ordering code configuration designates a single-axis controller (1 axis) belonging to component series 2X / 23 (23), featuring wall-mounting / housing installation (W), 8 digital inputs and 8 digital outputs (08), a integrated PROFIBUS-DP fieldbus interface (P), and standard hardware execution (0). Driven by a 16/32-bit MC68376 microcontroller, the controller incorporates onboard Flash EPROM, EEPROM, and RAM memory, differential analog voltage inputs, position sensor interfaces, and an RS-232 serial interface for parameterization via WIN-PED software.
Key Technical Specifications
| Parameter | Specification |
| Product Type | Digital Axis Controller / NC Motion Controller |
| Manufacturer / Brand | Bosch Rexroth / Indramat |
| Model Code | VT-HNC100-1-23/W-08-P-0 |
| Number of Controlled Axes | 1 Hydraulic or Electrical Axis |
| Component Series | Series 2X (Design index 23) |
| Mounting / Housing Type | Wall Mounting / Enclosure Housing (W) |
| Fieldbus Interface | PROFIBUS-DP slave interface (P) |
| Digital I/O Configuration | 8 Digital Inputs / 8 Digital Outputs (08) |
| Processor Architecture | 16/32-bit MC68376 Microcontroller |
| Onboard Memory | 1 MB Flash EPROM, 8 KB EEPROM, 256 KB RAM |
| Power Supply Voltage | 18 to 36 V DC (24 V DC nominal) |
| Power Consumption | Approx. 8 W |
| Serial Interface | RS-232 interface for PC parameterization (WIN-PED setup tool) |
| Control Functions | Closed-loop position, pressure/force, velocity, and state control (PIDT1 algorithms) |
| Dimensions (W × H × D) | 71 mm × 204 mm × 155 mm |
| Weight | Approx. 1.0 kg |
Detailed Product Overview
The Bosch Rexroth VT-HNC100-1-23/W-08-P-0 is an advanced digital control unit tailored to handle the non-linear dynamics of electro-hydraulic systems. Traditional analog controllers often struggle with fluid compressibility, pressure fluctuations, and cylinder stiction; the VT-HNC100 overcomes these challenges using digital closed-loop control algorithms (including PIDT1 structure, state feedback, and automated curve generation) to deliver smooth velocity profiles and high-precision positioning.
Operating as a PROFIBUS-DP fieldbus node, the controller receives high-level target setpoints, motion commands, and operational parameters from a central PLC or automation system. It processes position feedback from absolute or incremental encoder interfaces alongside system pressure signals from analog transducers, continuously outputting corrected command signals to proportional or servo valves.
The unit’s 8 digital inputs and 8 digital outputs handle local machine signals, travel limits, hardware enables, and status flags. Onboard non-volatile memory (Flash EPROM and EEPROM) ensures system parameters, valve curve calibrations, and motion program steps remain stored without requiring battery buffering during plant power down.

VT-HNC100-1-23/W-08-P-0
Engineering Selection Highlights
- Dedicated Electro-Hydraulic Motion Logic: Built-in control algorithms specifically account for hydraulic fluid dynamics, valve non-linearities, and system compliance.
- Integrated PROFIBUS-DP Fieldbus: Allows seamless network integration into Siemens S7 and standard industrial PLC environments for real-time setpoint transmission and diagnostics.
- Flexible Closed-Loop Control Modes: Supports position control, velocity control, pressure/force control, and dynamic p/Q (pressure/flow) switching on a single axis.
- Onboard Non-Volatile Storage: Retains configuration parameters and program data in Flash EPROM and EEPROM, eliminating data loss during mains power outages.
- WIN-PED Parameterization Tooling: Simple setup, oscilloscope-style diagnostic monitoring, and valve curve linearization via PC software over RS-232.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Controlled Actuator / Drive | Electro-hydraulic proportional or servo valves | Outputs analog voltage/current command signals to valve driver cards or integrated valve electronics (OBE). |
| Fieldbus Network | PROFIBUS-DP (IEC 61158 / EN 50170) | Requires standard GSD file for master PLC configuration. |
| Feedback Transducers | Incremental / Absolute Encoders, Analog Position/Pressure Transducers | Accepts digital SSI, incremental encoder signals, or 0–10 V / 4–20 mA analog feedback. |
| Engineering Software | WIN-PED Parameterization Software | PC software connects via front RS-232 port for parameter setup, commissioning, and axis tuning. |
| Power Supply | 24 V DC Industrial Power Supply (18 to 36 V DC range) | Supply circuit must be filtered to prevent logic reset under high field noise conditions. |
Dimensions, Mounting & Connection Notes
- Physical Dimensions: Width: 71 mm, Height: 204 mm, Depth: 155 mm.
- Mounting Style: Wall mounting (
W) inside industrial control cabinets using integrated mounting flanges. - Weight: Approx. 1.0 kg.
- Front Connections:
- Serial Port: DB-9 female RS-232 interface for PC setup.
- Fieldbus Port: DB-9 female connector for PROFIBUS-DP line attachment.
- Terminal Strips: Plug-in screw/spring terminal headers for 24 V DC power supply, digital 8 I/O lines, and analog/encoder feedback signals.
FAQ
What does the model code VT-HNC100-1-23/W-08-P-0 signify?
The code breaks down as: VT- (Series), 1 (1 controlled axis), 23 (Component series 2X/23), W (Wall-mounted housing), 08 (8 digital inputs / 8 digital outputs), P (PROFIBUS-DP fieldbus interface), 0 (Standard design).
What fieldbus protocol is supported on this specific model?
This model variant (P) is equipped with a PROFIBUS-DP slave interface for communication with industrial controllers and PLCs.
What parameters can the VT-HNC100-1-23/W-08-P-0 control?
It controls single-axis motion parameters including position, velocity, acceleration, pressure, and force for electro-hydraulic or electrical drives.
What software is used to commission and tune the controller?
Commissioning, axis parameter tuning, and diagnostics are performed using Bosch Rexroth’s WIN-PED software connected via the RS-232 serial port.
Does the VT-HNC100 require a backup battery?
No. All operational parameters, valve characteristic curves, and software routines are stored in onboard Flash EPROM and EEPROM non-volatile memory.
Verification & Troubleshooting Notes
- PROFIBUS Bus Error / Communication Timeout: Check bus termination resistors at both ends of the PROFIBUS segment. Verify that the station node address set on the controller matches the hardware address configured in the master PLC project.
- Axis Instability / Oscillation: Inspect closed-loop gain settings in WIN-PED. Hydraulics require precise dither, gain, and valve deadband compensation to prevent mechanical hunting around the target setpoint.
- Fault LED / Supply Voltage Drop: Ensure input supply voltage remains within the 18 to 36 V DC range under peak load conditions. Drops below 18 V DC will trip logic power monitoring circuits.
- Sensor Feedback Error: Inspect position transducer connections. For analog transducers, confirm signal grounding and shield integrity to eliminate electrical noise interference on feedback channels.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626