Description
Core Product Summary
The Bosch Rexroth VT-VSPD-1-2X/V0/0 is a digital valve amplifier designed for the control of proportional valves that operate without electrical position feedback. It belongs to component series 2X and is built as a printed circuit board in Europe format (100 × 160 mm).
The amplifier accepts voltage or current command values, provides adjustable ramp functions, and drives the valve solenoids with a maximum current of 2.5 A per solenoid. Configuration and parameterization are performed via the BODAC software through the front-panel RS 232 interface. It supports interconnection of up to 32 amplifiers on a local bus and includes enable and fault-output functions for system integration.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | Digital valve amplifier |
| Component series | 2X |
| Operating voltage | 24 VDC (21–30 V) |
| Current consumption | Max. 1.5 A; standby 270 mA |
| Fuse | 4 A time-lag |
| Solenoid current | 2.5 A per solenoid |
| Ramp time | Max. 300 s |
| Command value inputs | ±10 V or 4–20 mA |
| Interface | RS 232 (front-panel D-Sub) |
| Connector | 64-pole male multipoint (DIN 41612 form G) |
| Board dimensions | 100 × 160 mm (Europe format) |
| Operating temperature | 0 to 50 °C |
| Storage temperature | –20 to +70 °C |
| Weight | 0.2 kg |
Engineering Selection Highlights
- Exact model VT-VSPD-1-2X/V0/0 matches systems requiring a digital amplifier for proportional valves without electrical position feedback.
- 24 VDC supply range (21–30 V) and 4 A time-lag fuse provide stable operation under typical industrial power conditions.
- Maximum solenoid current of 2.5 A supports a wide range of Rexroth proportional valves listed in the product documentation.
- Front-panel RS 232 interface and BODAC software enable valve selection, ramp adjustment, characteristic-curve correction and diagnostics without hardware jumpers.
- 64-pole multipoint connector and Europe-format board allow direct installation in standard card holders used with Rexroth valve electronics.
- Local-bus capability permits interconnection of up to 32 amplifiers for centralized parameterization.
- Operating temperature range of 0 to 50 °C defines the environmental limits for control-cabinet installation.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Supported valves | 4WRA 6/10 (series 2X), 4WRZ 10–52 (series 5X–7X), DBE/DBEM, DRE/DREM, DBET, 3DREP and related types | Confirm exact valve series and size against the amplifier configuration |
| Power supply | 24 VDC (21–30 V) | Observe upper and lower limits |
| Connector | 64-pole male multipoint, DIN 41612 form G | Compatible with corresponding female connectors and card holders |
| Configuration tool | BODAC PC software | Required for valve selection and parameter setting |
| Card holders | VT 3002-1-2X/48F or VT 3002-1-2X/64G | For control-cabinet installation only |
| Local bus | Up to 32 amplifiers | Address assignment via BODAC |
| Interface cable | Standard 1:1 RS 232 cable or VT-HACD interface set | For parameterization and diagnostics |
Dimensions, Mounting & Connection Notes
The amplifier is a double-sided Europe-format printed circuit board measuring 100 × 160 mm. Front-plate height is 3 HE (128.4 mm). It mounts in compatible open card holders (VT 3002 series) intended for control-cabinet installation. Connection is made via the 64-pole male multipoint connector. Measuring sockets on the front plate provide access to valve current and command-value signals. Clearances and orientation follow standard Europe-card practices; the board must be fully seated and the enable input correctly wired before operation.

VT-VSPD-1-2X/V0/0

VT-VSPD-1-2X/V0/0
Detailed Product Overview
The Bosch Rexroth VT-VSPD-1-2X/V0/0 is a digital valve amplifier engineered for proportional valves operating without electrical position feedback. Constructed as a Europe-format (100 × 160 mm) printed-circuit board with a double-sided daughter board, the unit centres on a microcontroller that manages command-value processing, ramp generation, output-stage control and diagnostic functions.
Command values may be supplied as differential voltage (±10 V) or current (4–20 mA). Four binary-coded digital inputs allow selection of up to 16 stored parameter sets, each containing command values and associated ramp times. An enable input activates the outputs, while a fault output and front-panel LEDs indicate operational status. The amplifier can drive two solenoids at a maximum of 2.5 A each and supports free programming of output-stage frequency, bias current, surge current and characteristic-curve correction with up to eight support points.
Parameterization and valve selection are performed exclusively through the BODAC software via the front-panel RS 232 D-Sub interface. Up to 32 amplifiers may be linked on a local bus, each assigned a unique address so that a single connection serves the entire group. Measuring sockets on the front plate provide real-time access to valve current and command-value signals for commissioning and troubleshooting.
Installation requires a compatible 64-pole card holder and a regulated 24 VDC supply within the specified 21–30 V window. The 4 A time-lag fuse protects against transient overloads. Because the amplifier is intended only for valves without electrical position feedback, system designers must verify that the selected valve type appears in the manufacturer’s compatibility list and that the hydraulic circuit does not rely on closed-loop position control.
The combination of software-configurable inputs, adjustable ramps and local-bus networking makes the VT-VSPD-1-2X/V0/0 a flexible interface module for industrial electrohydraulic systems that demand precise open-loop proportional control.
Applications & System Role
The VT-VSPD-1-2X/V0/0 functions as the electronic interface between a higher-level controller and proportional valves that lack electrical position feedback. It converts analogue or digital command values into controlled solenoid currents, applying programmable ramps and characteristic-curve corrections to achieve smooth valve response.
In the hydraulic architecture it occupies the amplifier stage of the electrohydraulic control loop, handling enable logic, fault signalling and optional local-bus communication. Typical system fit includes industrial machines that employ Rexroth open-loop proportional directional or pressure valves where precise command-value processing and ramp control are required without closed-loop position feedback.
FAQ
What is the Bosch Rexroth VT-VSPD-1-2X/V0/0?
It is a digital valve amplifier for controlling proportional valves that operate without electrical position feedback.
Which component series does it belong to?
It belongs to component series 2X.
What supply voltage does it require?
It operates on 24 VDC with a permissible range of 21–30 V.
What is the maximum solenoid current?
The amplifier can supply a maximum of 2.5 A per solenoid.
How is the amplifier configured?
Configuration, valve selection and parameterization are performed with the BODAC PC software via the front-panel RS 232 interface.
What board format is used?
It is a Europe-format printed circuit board measuring 100 × 160 mm.
Which connector does it use?
It uses a 64-pole male multipoint connector conforming to DIN 41612 form G.
Can multiple amplifiers be networked?
Yes, up to 32 amplifiers can be interconnected on a local bus for shared parameterization and diagnostics.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626