Sale!

B&R X20DO8322 X20 Digital Output Module

The B&R X20DO8322 is an X20 system digital output module with eight 24 VDC source outputs designed for 1-wire connections. Each channel is rated at 0.5 A with a total nominal current of 4 A. The outputs use current-sourcing FET technology and include integrated thermal shutdown protection for overcurrent or short circuit, plus an internal freewheeling diode for inductive loads.

Categories: , , , , SKU: X20DO8322 Brand:

Description

Core Product Summary

The B&R X20DO8322 is an X20 system digital output module with eight 24 VDC source outputs designed for 1-wire connections. Each channel is rated at 0.5 A with a total nominal current of 4 A. The outputs use current-sourcing FET technology and include integrated thermal shutdown protection for overcurrent or short circuit, plus an internal freewheeling diode for inductive loads.

The module provides output status monitoring with a 10 ms delay and supports diagnostics via LED and software. Power consumption is 0.26 W on the bus and 0.8 W for internal I/O. It requires a separate X20 bus module and 12-pin terminal block for installation in the X20 modular I/O architecture.

 

Key Technical Specifications

Parameter Value
Product type X20 digital output module
Number of outputs 8
Output circuit Source (current-sourcing FET)
Nominal voltage 24 VDC
Switching voltage 24 VDC −15 % / +20 %
Nominal output current 0.5 A per channel
Total nominal current 4 A
Connection type 1-wire
Output protection Thermal shutdown on overcurrent/short circuit; internal freewheeling diode for inductive loads
Peak short-circuit current <12 A
Leakage current (off) 5 µA
RDS(on) 210 mΩ
Switching delay (0→1 / 1→0) <300 µs
Switching frequency (resistive) Max. 500 Hz
Diagnostic status Output monitoring with 10 ms delay
Insulation voltage (channel to bus) 500 Veff
Electrical isolation Channel isolated from bus; channels not isolated from each other or I/O power supply
Power consumption (bus) 0.26 W
Power consumption (internal I/O) 0.8 W
Additional power dissipation (resistive actuators) +0.42 W
Status indicators I/O function per channel, operating state, module status
Degree of protection IP20
Operating temperature (horizontal) −25 to +60 °C
Operating temperature (vertical) −25 to +50 °C
Storage/transport temperature −40 to +85 °C
Relative humidity (operation) 5 to 95 %, non-condensing
Pitch 12.5 +0.2 mm
B&R ID code 0xA4AC

 

Detailed Product Overview

The X20DO8322 supplies eight digital outputs for the B&R X20 modular I/O system. The outputs are configured as source (high-side) using current-sourcing FETs and support 1-wire field connections. Each channel is rated for 0.5 A continuous, with a module total of 4 A.

Integrated protection includes thermal shutdown in case of overcurrent or short circuit (peak short-circuit current <12 A) and an internal freewheeling diode that handles inductive load switching. Output status is monitored with a 10 ms diagnostic delay, and both module run/error and individual output error states are reported via LED indicators and software.

Switching times are under 300 µs in both directions. Resistive loads can be switched at up to 500 Hz; inductive load frequency limits are defined in the module documentation. Typical on-resistance is 210 mΩ and off-state leakage is 5 µA.

Channels are electrically isolated from the X20 bus (500 Veff) but share a common reference with each other and the I/O power supply. The electronic module mounts on an X20 bus module (X20BM11 or X20BM15) and uses a separately ordered 12-pin X20TB12 terminal block. Bus power draw is 0.26 W and internal I/O consumption is 0.8 W, with an additional 0.42 W dissipation possible from resistive actuators.

The module operates across the standard X20 temperature ranges and carries IP20 protection for control-cabinet installation.

X20DO8322

X20DO8322

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
System family B&R X20 system Requires X20 bus module for backplane connection
Bus module X20BM11 or X20BM15 Ordered separately; provides 24 VDC keyed internal I/O supply
Terminal block X20TB12 (12-pin, 24 VDC keyed) Ordered separately
Output wiring 1-wire source connection Designed for source (high-side) circuit
Isolation Channel-to-bus isolation Channels share common reference with I/O supply
Engineering software Automation Studio Hardware upgrades available for multiple versions

 

Dimensions, Mounting & Connection Notes

  • Pitch: 12.5 +0.2 mm
  • Mounting: X20 bus module on DIN rail; horizontal or vertical orientation supported
  • Required accessories (ordered separately):
    – Bus module: X20BM11 or X20BM15
    – Terminal block: X20TB12
  • Degree of protection: IP20
  • Installation elevation: no limitation up to 2000 m; derate ambient temperature by 0.5 °C per 100 m above 2000 m
  • Connection: 1-wire source outputs via 12-pin terminal block

 

FAQ

What is the B&R X20DO8322?
It is an X20 digital output module with eight 24 VDC source outputs rated at 0.5 A each for 1-wire connections, including integrated overcurrent and short-circuit protection.

What is the current rating per channel and total?
Each output is rated 0.5 A; the total nominal current for the module is 4 A.

What type of output circuit is used?
Source (current-sourcing FET / high-side) with 1-wire connections.

Does the module include output protection?
Yes. It features thermal shutdown on overcurrent or short circuit and an internal freewheeling diode for inductive loads. Peak short-circuit current is less than 12 A.

What accessories are required?
A bus module (X20BM11 or X20BM15) and a 12-pin terminal block (X20TB12) must be ordered separately.

What are the operating temperature limits?
Horizontal mounting: −25 to +60 °C. Vertical mounting: −25 to +50 °C.

Is output status monitored?
Yes. Output monitoring is provided with a 10 ms delay, and diagnostics are available via LED and software.