Description
Core Product Summary (Brand / Model / Key Attributes)
The B&R X20PS3300 is a dedicated power supply module designed for the modular B&R X20 system architecture. Functioning as a system feed-in module, it accepts a nominal 24 VDC input voltage and generates internal power to energize the X20 backplane bus logic and connected I/O slice modules.
Operating from a 24 VDC input range (-15% to +20%), the module draws up to 0.7 A and provides up to 7 W of nominal power output to the internal X20 backplane. It also integrates power supply feed-in for field I/O channels, featuring built-in overcurrent and reverse polarity protection. The module features 500 Vrms galvanic isolation between the input supply and the internal backplane bus, helping ensure system safety and noise immunity in industrial panel layouts.
Key Technical Specifications
| Specification Parameter | Technical Detail |
| Product Model | X20PS3300 |
| Product Type | Power supply module |
| System Family | B&R X20 System |
| Nominal Input Voltage | 24 VDC (-15% / +20%) |
| Input Current | Max. 0.7 A |
| Nominal Output Power (Bus) | 7 W |
| Internal Bus Output Voltage | 5 VDC (backplane logic power) |
| Field I/O Power Feed-In | Integrated 24 VDC internal pass-through |
| Protection Mechanisms | Reverse polarity protection, overcurrent protection |
| Galvanic Isolation | 500 Vrms (input to backplane bus) |
| Status Indicators | LED displays for input power and status |
| Power Loss Dissipation | Max. 2.0 W |
| Operating Temperature | -25°C to +60°C (Horizontal mounting) |
Detailed Product Overview
The B&R X20PS3300 serves as a central energy distribution interface within the modular X20 automation system. In control configurations where the primary CPU or preceding interface module cannot supply sufficient backplane power for long I/O racks, the X20PS3300 acts as a secondary power feed-in slice. It converts incoming 24 VDC panel power into regulated 5 VDC logic power for internal backplane communication chips while passing 24 VDC along the I/O internal bus contacts.
Providing up to 7 W of output power to the internal bus, the module allows engineers to extend X20 backplane racks without adding separate bus controller drops. It isolates the incoming control voltage from the backplane electronics via 500 Vrms galvanic separation, protecting internal communication against field-side voltage fluctuations and noise.
The module mounts onto compatible X20 bus modules and interfaces with field power wiring via a standard terminal block. Integrated LED indicators allow maintenance teams to quickly confirm primary 24 VDC supply presence and operational readiness.
Engineering Selection Highlights
- Backplane Power Refresh: Delivers up to 7 W of internal backplane logic power, enabling system expansion across longer X20 I/O rail configurations.
- 24 VDC Feed-In: Connects standard 24 VDC control power (-15% / +20%) to refresh both internal bus logic and field I/O supply lines.
- Electrical Isolation: Features 500 Vrms galvanic isolation between incoming 24 VDC power and the internal backplane bus.
- Built-in Circuit Protection: Includes reverse polarity and overcurrent protection to safeguard backplane hardware during wiring installation.
- Diagnostics LEDs: Front-panel LEDs provide visual verification of supply voltage presence and module operational status.
- Wide Operating Range: Rated for operation in environments from -25°C to +60°C under standard horizontal mounting conditions.

X20PS3300
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| System Platform | B&R X20 System | Installs as a power feed-in module within X20 racks. |
| Bus Module Requirement | X20BM11, X20BM15 | Mounts on standard X20 bus bases for backplane power injection. |
| Terminal Block Fit | 6-pin or 12-pin X20 terminal block (e.g., X20TB06 / X20TB12) | Receives 24 VDC and 0V power wiring lines. |
| Engineering Environment | B&R Automation Studio | Recognized in hardware configuration trees for power budget calculation. |
| Power Budgeting | Required when total module consumption exceeds 7 W | Place additional X20PS3300 modules downstream when backplane power is depleted. |
Dimensions, Mounting & Connection Notes
- Mounting Configuration: Modular plug-in design; installs onto standard X20 DIN rail bus bases.
- Power Wiring: Connect 24 VDC supply lines to the designated input terminals on the terminal block, adhering to correct polarity.
- Operating Temperature Bounds: Standard horizontal mounting rating spans -25°C to +60°C ambient.
- Clearance Guidelines: Maintain standard vertical clearance above and below the X20 rail to allow natural convection cooling.
- Enclosure Protection: IP20 rated housing per EN 60529 standards; intended for installation inside closed control cabinets.
FAQ
What is the primary function of the B&R X20PS3300?
The B&R X20PS3300 is a power supply module that injects 24 VDC power into the X20 backplane to supply internal 5 VDC logic power (up to 7 W) and field I/O supply lines.
When is an X20PS3300 required in an X20 rack?
It is required when the total power consumption of downstream I/O slice modules exceeds the backplane power provided by the main CPU or interface module.
What input voltage range does the module accept?
The module operates on a nominal 24 VDC input voltage with an allowable tolerance range of -15% to +20% (20.4 VDC to 28.8 VDC).
Does the X20PS3300 provide electrical isolation?
Yes, it provides 500 Vrms galvanic isolation between the 24 VDC input supply and the internal X20 backplane bus.
Which bus modules are compatible with the X20PS3300?
It is compatible with standard X20 bus modules such as the X20BM11 and X20BM15.
What protective features are built into the module?
The module incorporates reverse polarity protection and overcurrent protection to guard against field wiring errors.
Verification & Troubleshooting Notes
- Input Power LED Verification: Check front status LEDs upon powering up the cabinet to verify that 24 VDC is present at the input terminals.
- Backplane Power Calculation: If downstream I/O modules fail to initialize or display backplane supply faults, calculate total backplane power draw in Automation Studio to confirm if another X20PS3300 module is required.
- Terminal Wiring & Polarity Check: Confirm 24 VDC and 0V supply wires are securely seated in the terminal block and correctly polarized prior to applying power.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626