Sale!

Caldaro S30JBK-ZT-30R3G-4889G 3-Axis Teach Pendant Joystick

Parameter Specification
Manufacturer Caldaro
Model S30JBK-ZT-30R3G-4889G
Product type Three-axis joystick controller
Coordinate axes X, Y, and Z
Resistance value 2 kΩ
Resistance tolerance 2%
Return mechanism Spring return to center on all axes
Dust protection Dust-proof rubber cover
Lead wires Approximately 300 mm
X/Y lead-wire size AWG 28
Categories: , , , , SKU: S30JBK-ZT-30R3G-4889G Brand:

Description

Core Product Summary

The Caldaro S30JBK-ZT-30R3G-4889G is a three-axis, spring-return joystick controller used in robot teach-pendant and industrial operator-interface applications. It provides X, Y, and Z coordinate control through potentiometer-based position sensing and returns automatically to center when released.

The exact-model designation specifies a 2 kΩ resistance value with 2% tolerance. The joystick includes a dust-proof rubber cover, uses lead-wire terminations approximately 300 mm long, and is intended for panel mounting with four M2 fixing screws.

 

Key Technical Specifications

Parameter Specification
Manufacturer Caldaro
Model S30JBK-ZT-30R3G-4889G
Product type Three-axis joystick controller
Coordinate axes X, Y, and Z
Resistance value 2 kΩ
Resistance tolerance 2%
Return mechanism Spring return to center on all axes
Dust protection Dust-proof rubber cover
Lead wires Approximately 300 mm
X/Y lead-wire size AWG 28
Z lead-wire size AWG 27
Mounting Panel mount, four M2 fixing screws
Mounting-panel thickness 1–2 mm
Operating temperature -20 °C to +65 °C
Vibration resistance 10–55 Hz, 98 m/s² (10 G)
Shock resistance 294 m/s² (30 G)
Mass Approximately 100 g for the three-axis configuration

 

Engineering Selection Highlights

  • The S30JBK-ZT-30R3G-4889G is a three-dimensional joystick, so it provides X, Y, and Z position inputs rather than two-axis control.
  • Its spring-return mechanism returns the lever to center on release, which is relevant for momentary positioning commands in a teach pendant or operator station.
  • The exact-model 2 kΩ ±2% resistance value must match the controller input expectation; it differs from the 10 kΩ value shown for the standard 30JB-series configuration.
  • The dust-proof rubber cover is part of the exact-model configuration and affects panel cutout and installation details.
  • The joystick uses approximately 300 mm lead wires, with AWG 28 conductors for X and Y axes and AWG 27 for the Z axis.
  • Panel installation requires a 1–2 mm mounting panel and four M2 × 6 fixing screws.
  • The operating temperature range of -20 °C to +65 °C defines the environmental boundary for joystick installation.
S30JBK-ZT-30R3G-4889G

S30JBK-ZT-30R3G-4889G

S30JBK-ZT-30R3G-4889G

S30JBK-ZT-30R3G-4889G

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control input type Potentiometer-based analog position signals The joystick provides position feedback through its X, Y, and Z potentiometer circuits.
Resistance value 2 kΩ ±2% The connected controller must be configured for this exact-model resistance value.
Axes X, Y, and Z The joystick provides three-dimensional coordinate control.
Return behavior Spring return to center The lever returns to center when released.
Mounting Panel mounting with four M2 × 6 screws A 1–2 mm panel thickness is specified.
Dust protection Dust-proof rubber cover The cover is included in the exact-model configuration.
Electrical connection Approximately 300 mm lead wires X and Y use AWG 28; Z uses AWG 27.
Teach-pendant association ABB S4/S4C teach-pendant joystick application The exact model is identified in association with ABB S4/S4C teach-pendant equipment.

 

Dimensions, Mounting & Connection Notes

Item Verified data
Mounting method Panel mount
Fixing screws Four M2 × 6 pan-head screws, included
Mounting-panel thickness 1–2 mm
Dust-proof cover Included
Lead-wire length Approximately 300 mm
X/Y lead wires AWG 28
Z lead wire AWG 27
X/Y lever travel Approximately ±10° to ±15° from center, omnidirectional
Z lever travel Approximately ±30° to ±35° from center
X/Y operating force Approximately 0.8–2 N
Z operating force Approximately 15–60 mN·m
Operating temperature -20 °C to +65 °C
Mass Approximately 100 g

The joystick mounts through a panel using four M2 × 6 screws. With the dust-proof rubber cover installed, the documented panel arrangement changes and the counterbore work shown for the uncovered version is not required.

 

Detailed Product Overview

The Caldaro S30JBK-ZT-30R3G-4889G is a three-axis joystick controller in the 30JBK-ZT-30R3G family. The model designation identifies a three-dimensional coordinate joystick with spring return on all axes and a dust-proof rubber cover; the final four-digit suffix, 4889, denotes a customer-specific configuration.

The joystick provides X, Y, and Z control. The X and Y axes operate omnidirectionally over approximately ±10° to ±15° from center, while the Z axis operates over approximately ±30° to ±35°. The spring-return mechanism returns the lever to center after release, supporting momentary command input in a teach-pendant or industrial operator-interface application.

For the exact S30JBK-ZT-30R3G-4889G variant, the documented resistance value is 2 kΩ with a 2% tolerance. This is a critical replacement parameter because the standard 30JB-series documentation lists 10 kΩ potentiometers for its standard configuration. The exact-model value should therefore take precedence when matching the joystick to the pendant controller.

The joystick is fitted with a dust-proof rubber cover and uses lead wires of approximately 300 mm. The X and Y axes use AWG 28 conductors, while the Z axis uses AWG 27. The documented terminal arrangement identifies directional conventions for the X, Y, and Z axes, with the standard version incorporating a current center tap for all three axes.

Installation is by panel mounting with four M2 × 6 screws into a 1–2 mm panel. The documented operating environment is -20 °C to +65 °C, with vibration resistance of 10–55 Hz at 98 m/s² and shock resistance of 294 m/s². The three-axis configuration has a mass of approximately 100 g.

 

Applications & System Role

The S30JBK-ZT-30R3G-4889G functions as the manual positioning input device in a robot teach pendant or similar operator interface. Its X and Y axes provide planar lever movement, while the Z axis provides rotational or third-coordinate control through the knob arrangement.

The spring-return design makes the joystick suitable for momentary jogging and positioning commands: when the operator releases the lever, it returns to the center position. The potentiometer outputs provide proportional position information to the associated teach-pendant electronics.

This exact model is identified in association with ABB S4/S4C teach-pendant equipment. Its 2 kΩ resistance value, three-axis configuration, rubber cover, and lead-wire arrangement are the principal points to verify when replacing the joystick or matching it to an existing pendant.

 

FAQ

What is the Caldaro S30JBK-ZT-30R3G-4889G?
It is a Caldaro three-axis, spring-return joystick controller used in robot teach-pendant and industrial operator-interface applications.

How many axes does the joystick control?
It controls three axes: X, Y, and Z.

What is the resistance value of this exact model?
The S30JBK-ZT-30R3G-4889G is specified at 2 kΩ with a 2% tolerance.

Does the joystick return to center?
Yes. It has a spring-return mechanism that returns the lever to center on release.

What type of cover does it include?
It includes a dust-proof rubber cover.

How is the joystick mounted?
It is panel-mounted using four M2 × 6 screws into a 1–2 mm thick panel.

What are the lead-wire details?
The lead wires are approximately 300 mm long. X and Y axes use AWG 28 wire, and the Z axis uses AWG 27 wire.

Which teach-pendant family is this joystick associated with?
The exact model is identified in association with ABB S4/S4C teach-pendant equipment.