Description
Key Technical Specifications
| Parameter | Value |
| Rated Voltage | 115 VAC (50/60 Hz) |
| Operating Voltage Range | 103 to 126 VAC |
| Power Consumption | 15 W (at 60 Hz) / 20W–23W variants |
| Nominal Speed | 3,100 RPM (at 60 Hz) |
| Maximum Airflow | 105.0 CFM (196 m^3/h) |
| Maximum Static Pressure | 0.223 in H_2O |
| Noise Level | 47.6 dBA |
| Bearing Type | Precision Ball Bearing |
| Frame Dimensions | 119.13 x 119.13 x 39.12 mm (4.72 x 4.72 x 1.50 in) |
| Termination | 0.120 in wide terminals |
| Operating Temperature | −10 to +70°C |
| Agency Approvals | UL, cUL, CE, RoHS |
Product Introduction & Supply Chain Strategy
The Comair Rotron MX2B3 is a heavy-duty 115 VAC axial cooling fan belonging to the industry-standard Muffin XL series. Engineered with a high-quality magnesium alloy die-casting venturi frame and a UL 94V-0 plastic propeller, it delivers a reliable 105 CFM of forced-air cooling to eliminate thermal bottlenecks in electrical enclosures, variable frequency drives, and server racks. Maintenance teams deploy this unit to ensure continuous thermal dissipation and protect sensitive electronics from premature heat stress.
Sourcing this cooling fan as a Brand New Surplus unit protects critical plant infrastructure from unexpected premature failures. Secondary-market or refurbished fans frequently suffer from dried lubricant, worn ball bearings, and weakened motor windings that can seize without warning. Deploying certified New Surplus hardware guarantees maximum design lifespan (83,000 hours at 40°C), eliminates unexpected thermal shutdowns, and optimizes your plant’s Total Cost of Ownership (TCO).

MX2B3

MX2B3
Installation & Configuration Guide
Stage 1: Pre-Installation (Prep & Safety)
- Isolate power and execute Lock-Out/Tag-Out (LOTO) protocols on the target electrical cabinet or enclosure.
- Put on an ESD-safe grounded wrist strap or ensure proper grounding compliance for electrical safety.
- Inspect the replacement fan for shipping integrity and verify that the 115 VAC rating matches your facility’s supply lines.
Stage 2: Removal
- Disconnect the terminal power leads or wiring harness from the failed fan terminals.
- Remove the mounting screws securing the fan to the enclosure wall or exhaust bracket, supporting the unit by hand to prevent it from dropping onto internal components.
Stage 3: Installation (Clone & Seat)
- Verify the airflow and rotational direction arrows marked on the side of the MX2B3 frame to ensure it matches your exhaust or intake requirements.
- Align the mounting holes of the fan with the enclosure studs or bracket slots.
- Fasten the mounting hardware evenly across opposite corners to prevent frame distortion, torquing screws securely without over-tightening.
Stage 4: Power-On & Testing
- Reconnect the 115 VAC power leads securely to the 0.120-inch terminals, ensuring proper insulation boots or heat shrinks are in place.
- Remove enclosure LOTO locks and restore power to the system.
- Verify smooth mechanical rotation, check for abnormal acoustic vibration, and confirm proper airflow direction out of the cabinet.
Firmware/Software Versions & Upgrade Notes
- Firmware/Software Applicable: None. As an electromechanical cooling component, the MX2B3 operates purely on direct 115 VAC line power and requires no software configuration or firmware management.
- Compatibility Notes: Ensure that line voltage stability matches the 103–126 VAC operating window. Dropping below this range can reduce motor RPM and volumetric airflow efficiency.
- Upgrade Considerations: When replacing older legacy sleeve-bearing fans with the ball-bearing MX2B3, verify that terminal connection styles match your existing wiring harness layout.
Frequently Asked Questions (FAQ)
Why should I purchase a New Surplus fan instead of a cheaper used or refurbished model?
Refurbished cooling fans often contain dried bearing lubricants and fatigued motor coils from years of high-temperature operation. Buying New Surplus guarantees zero operating hours, full thermal efficiency, and long-term mechanical reliability, preventing catastrophic over-temperature faults in your control panels.
Is this unit an original factory-authentic component?
Yes. This product is a Brand New Surplus unit supplied in its original packaging, entirely uninstalled and free from prior mechanical wear or environmental exposure.
What is the expected service life of the MX2B3 fan?
The MX2B3 is engineered for continuous-duty operation with a designed life expectancy of 83,000 hours at an ambient temperature of 40°C.
Can the MX2B3 operate on 230 VAC power systems?
No. The MX2B3 is specifically designed for a 115 VAC (50/60 Hz) nominal supply. Connecting it directly to a 230 VAC line will instantly damage the motor windings.
How is the airflow direction configured on this model?
The unit utilizes standard axial rotation with airflow direction typically flowing over the struts (or per standard Comair Rotron designation arrows marked on the exterior housing). Always cross-reference the directional arrows on the fan frame during installation.
What warranty terms cover this New Surplus cooling fan?
This unit includes a solid 1-year replacement warranty, giving you complete assurance of uncompromised quality and dependable supply-chain traceability.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626