Sale!

Cooper P3798102-00010 CN-UIM2 User Interface Module

  • Model: P3798102-00010 (CN-UIM2)
  • Brand: Cooper (Bay Controls / Cameron related)
  • Series: Compressor Control / User Interface
  • Core Function: Operator interface for turbo compressor control systems
  • Product Type: User Interface Module (UIM) / Operator Panel
  • Key Specs: Local display and control interface for compressor systems
  • Condition: New Original / New Surplus
Categories: , , , , SKU: P3798102-00010 CN-UIM2 Brand:

Description

3. Key Technical Specifications

Parameter Value
Manufacturer Cooper (Bay Controls)
Model Number P3798102-00010 / CN-UIM2
Product Type User Interface Module (UIM) / Operator Interface
Application Turbo compressor control systems
Function Local operator display, status monitoring, and control input
Origin USA
Mounting Panel / system-specific interface
Typical Use Compressor skid or control panel local HMI
Related Systems Cooper / Bay Controls / Cameron compressor packages

4. Product Introduction

The Cooper P3798102-00010 (CN-UIM2) is a User Interface Module designed for turbo compressor control systems. It serves as the local operator interface, providing display of operating parameters, status indication, and manual control inputs for the compressor package.

This module is used on compressor skids and control panels where operators need direct local access to system status and commands. It is a direct replacement for existing CN-UIM2 interfaces in Cooper / Bay Controls compressor applications.

5. Troubleshooting Quick Reference

Symptom Possible Cause Relevance to this Part Quick Check Method Recommendation
Blank or no display Power loss or internal failure ✅ High Verify power supply to the UIM Check upstream power before replacing the module
No response to operator inputs Communication fault or failed UIM ✅ High Check cable/connectors to main logic module Reseat connections; replace UIM if no response
Incorrect or frozen readings Communication loss with MLM ✅ Medium Verify link to Main Logic Module (CN-MLM2 or equivalent) Test communication path; replace UIM if isolated failure
Intermittent display Loose connector or power issue ✅ High Inspect and reseat all connectors Secure connections; replace if problem persists
System runs but local control unavailable UIM offline ✅ High Confirm module status LEDs and power Replace UIM after confirming power and cabling

If the compressor main logic continues to operate normally but local interface is dead, the CN-UIM2 is the most likely failed component. Provide photos of the unit and any status indicators to technical support.

P3798102-00010 CN-UIM2

P3798102-00010 CN-UIM2

P3798102-00010 CN-UIM2

P3798102-00010 CN-UIM2

6. Frequently Asked Questions (FAQ)

Q: What is the CN-UIM2 used for?
A: It is the local User Interface Module (operator panel) for Cooper / Bay Controls turbo compressor control systems. It provides display and local control functions.

Q: Is P3798102-00010 the same as CN-UIM2?
A: Yes. P3798102-00010 is the full part number; CN-UIM2 is the model designation.

Q: Does this include the main logic module?
A: No. This is only the User Interface Module. The Main Logic Module (often CN-MLM2 or similar) is a separate component.

Q: Can this be used on non-Cooper compressor systems?
A: It is designed specifically for Cooper / Bay Controls compressor packages. Compatibility with other systems is not guaranteed.

Q: Why is new-surplus pricing lower than current list?
A: These units come from excess project or surplus inventory. They are unused original product, tested, and carry a 1-year warranty. They are not refurbished.

Q: Any special installation notes?
A: Match the exact part number and revision. Verify cable connections to the main logic module and confirm power supply before applying power. Photograph existing wiring and mounting before removal.