Sale!

Danaher Motion TSIO-1001 SynqNet Slice I/O Network Bus Coupler

Parameter Specification
Manufacturer Danaher Motion / Kollmorgen (Motion Engineering Inc.)
Model / Part Number TSIO-1001
Product Type SynqNet Bus Coupler / Network Adaptor Head Module
System Family SynqNet Slice I/O System
Network Protocol SynqNet Ring/Line Topology Protocol
Physical Network Ports 2 × RJ45 ports (SynqNet IN / SynqNet OUT)
Backplane Capacity Supports up to 32 Slice I/O modules per node
Categories: , , , , SKU: TSIO-1001 Brand:

Description

Core Product Summary

The Danaher Motion TSIO-1001 is a SynqNet network adaptor and bus coupler module designed for distributed input/output architectures in precision motion control systems. Functioning as the primary interface node for Kollmorgen and Motion Engineering Inc. (MEI) SynqNet networks, the TSIO-1001 connects field I/O slices directly to the high-speed SynqNet motion network, enabling microsecond-level synchronized data exchange between host motion controllers and field peripherals.

Constructed for modular DIN-rail expansion, the TSIO-1001 serves as the head coupler for SynqNet Slice I/O rack assemblies. It manages communication across the backplane for attached digital and analog I/O expansion slices (such as the TSIO-2008 or TSIO-4005). Featuring dual RJ45 SynqNet ports, the module supports fault-tolerant ring topologies and provides local power distribution and galvanic isolation to safeguard host control electronics from field electrical noise.

 

Key Technical Specifications

Parameter Specification
Manufacturer Danaher Motion / Kollmorgen (Motion Engineering Inc.)
Model / Part Number TSIO-1001
Product Type SynqNet Bus Coupler / Network Adaptor Head Module
System Family SynqNet Slice I/O System
Network Protocol SynqNet Ring/Line Topology Protocol
Physical Network Ports 2 × RJ45 ports (SynqNet IN / SynqNet OUT)
Backplane Capacity Supports up to 32 Slice I/O modules per node
Maximum System I/O Points Up to 256 Discrete Inputs / 256 Discrete Outputs
Maximum Analog I/O Points Up to 16 Analog Inputs / 16 Analog Outputs
Mounting / Form Factor Standard 35mm DIN Rail Mount

 

Detailed Product Overview

The Danaher Motion TSIO-1001 acts as the communication anchor for distributed field devices within high-performance SynqNet motion networks. Rather than hardwiring every sensor and actuator back to a central controller chassis, the TSIO-1001 allows control engineers to place localized I/O nodes directly adjacent to machine axes, reducing complex wiring harnesses and minimizing signal degradation.

SynqNet Network Integration

Equipped with dual RJ45 interfaces, the TSIO-1001 integrates into SynqNet’s deterministic real-time network ring. It continuously passes cyclic control data between the master motion controller and the local backplane. SynqNet’s native fault-tolerant architecture allows the TSIO-1001 to maintain uninterrupted communication even if a cable breaks, instantly re-routing data packets along the redundant ring path.

Slice I/O Expansion Architecture

The TSIO-1001 functions as the head coupler for modular slice assemblies. Attached expansion slices snap onto the side of the coupler, interconnecting via an internal local bus. The TSIO-1001 translates incoming network packets into backplane protocol commands, managing up to 32 expansion slices—including digital input/output units and precision analog modules—without degrading network cycle times.

TSIO-1001

TSIO-1001

TSIO-1001

TSIO-1001

Engineering Selection Highlights

  • Deterministic Motion Synchronization: Connects local field I/O directly to the SynqNet ring for real-time synchronization with servo drives and motion axes.
  • Modular Slice Architecture: Supports custom I/O configurations by hosting up to 32 expansion slices on a single network node.
  • Fault-Tolerant Dual RJ45 Ports: Enables self-healing ring topologies that preserve communication integrity in the event of a network cable disconnect.
  • Reduced Cabinet Footprint: Compact DIN-rail head design consolidates high-density field wiring into a localized assembly.
  • Galvanic Noise Isolation: Isolates delicate network logic circuits from industrial field wiring noise and ground potential differences.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Network Master SynqNet Motion Controller / MEI Motion Cards Requires a active SynqNet network controller running compatible setup tools.
Expansion Modules SynqNet Slice I/O Series (e.g., TSIO-2008, TSIO-4005, TSIO-4006) Mounts directly to the right side of the TSIO-1001 on the local backplane.
Network Cabling Standard Category 5 / 5e Shielded Twisted Pair (STP) Ethernet Cables Use shielded RJ45 cables to maintain EMC compliance across the SynqNet ring.
Mounting Standard 35mm Metallic DIN Rail Ensure proper grounding of the DIN rail to establish a low-impedance ground path.

 

Dimensions, Mounting & Connection Notes

  • Mounting Orientation: Install vertically on a standard 35mm DIN rail. Ensure the module is firmly locked onto the rail using the rear mounting clip.
  • Network Wiring: Connect the SynqNet IN cable to the upper RJ45 port and the SynqNet OUT cable to the lower RJ45 port to form a closed-ring topology.
  • Backplane Assembly: Slide adjacent I/O slices onto the DIN rail and press them firmly against the TSIO-1001 side connector until the locking tabs snap securely into place.
  • Shielding & Grounding: Ensure the DIN rail is bonded directly to the enclosure ground plane. Shielded network cables must be grounded through the metallic RJ45 connector housing.

 

FAQ

What is the primary function of the Danaher TSIO-1001?

The TSIO-1001 is a SynqNet network bus coupler that bridges a central SynqNet motion controller with local Slice I/O expansion modules over a real-time network link.

How many expansion modules can be connected to a single TSIO-1001?

A single TSIO-1001 head module can support up to 32 expansion slices on its local backplane, handling up to 256 digital inputs/outputs and 16 analog inputs/outputs.

What network topology does the TSIO-1001 support?

It features dual RJ45 ports designed for SynqNet ring and line topologies, supporting fault-tolerant, self-healing network configurations.

Which expansion modules are compatible with the TSIO-1001?

The TSIO-1001 is compatible with Danaher Motion / Kollmorgen SynqNet Slice I/O modules, including the TSIO-2008 and TSIO-4005/4006 series.

 

Verification & Troubleshooting Notes

  • Network Link LEDs Inactive: Inspect RJ45 cable connections on both ports. Verify that Category 5/5e STP cabling is correctly terminated and connected to an active SynqNet master or adjacent node.
  • Backplane Communication Failure: Ensure all Slice I/O expansion units are firmly snapped together without gaps between module housings. Check for bent pins on side expansion connectors.
  • Unrecognized I/O Slices: Confirm that total attached slices do not exceed the maximum backplane limit of 32 units or overall network channel capacities.
  • Ring Topology Error: Verify that the SynqNet IN and OUT cables form a complete continuous loop back to the controller without crossed port connections.