Sale!

Danaher ZMP-SYNQNET-PCI 64-Bit SynqNet Motion Controller Card

Although occasionally listed in distributor catalogs alongside Zygo metrology components, the ZMP-SYNQNET-PCI is a dedicated motion control interface card manufactured by Danaher Motion (formerly Motion Engineering, Inc.) and distributed under the Kollmorgen brand. It is a high-performance, 64-bit Universal PCI motion controller designed to bridge a host PC to the SynqNet deterministic real-time industrial network.

Categories: , , , , SKU: ZMP-SYNQNET-PCI Brand:

Description

Core Product Summary

Although occasionally listed in distributor catalogs alongside Zygo metrology components, the ZMP-SYNQNET-PCI is a dedicated motion control interface card manufactured by Danaher Motion (formerly Motion Engineering, Inc.) and distributed under the Kollmorgen brand. It is a high-performance, 64-bit Universal PCI motion controller designed to bridge a host PC to the SynqNet deterministic real-time industrial network.

The ZMP-SYNQNET-PCI enables precise, synchronized multi-axis motion control, supporting up to 32 axes and 34 nodes on a single network. Powered by a high-speed embedded processor, it delivers servo update rates of up to 48 kHz for tight trajectory control. The card is engineered for demanding automation applications requiring low-latency communication, advanced trajectory planning, and seamless integration with SynqNet-compatible drives, motors, and I/O modules.

 

Key Technical Specifications

Parameter Verified Specification
Manufacturer Danaher Motion / Motion Engineering (MEI) / Kollmorgen
Product Type 64-bit PCI Motion Controller Card
Network Protocol SynqNet (deterministic real-time industrial network)
Bus Interface 64-bit Universal PCI
Maximum Axes Supported 32 axes
Maximum Nodes Supported 34 nodes
Servo Update Rate Up to 48 kHz (4 axes), up to 12 kHz (20 axes)
Processor Architecture High-performance embedded processor (e.g., Motorola 466 MHz PowerPC)
Typical I/O Configuration SQID + ADC4/DAC4 + DIN32/DOUT32 (variant dependent)
Known Part Numbers 1007-0097 (Rev 2C), T115-0005

 

Detailed Product Overview

The ZMP-SYNQNET-PCI serves as the central communication and trajectory planning hub for complex multi-axis machinery. By leveraging the SynqNet architecture, the card eliminates the latency and jitter associated with traditional fieldbuses, providing a deterministic, high-speed link between the host PC’s PCI bus and distributed servo drives. This architecture is critical for applications such as semiconductor manufacturing, precision machining, and advanced robotics, where coordinated motion paths must be executed with microsecond-level accuracy.

At the hardware level, the card utilizes a powerful embedded processor to offload trajectory calculation and servo loop management from the host PC’s main CPU. This distributed processing ensures that the host system can focus on high-level supervisory control and user interface tasks, while the ZMP-SYNQNET-PCI handles the rigorous demands of real-time kinematics. The 64-bit PCI interface guarantees high-bandwidth data transfer, preventing bottlenecks during complex multi-axis synchronization.

The SynqNet topology supported by this card allows for a highly flexible system architecture. A single ZMP-SYNQNET-PCI card can manage up to 34 nodes, which can include intelligent servo drives, stepper drives, and dedicated SynqNet I/O blocks. This daisy-chain or star-topology capability significantly reduces cabinet wiring complexity and improves system reliability. Variants of the card, such as the ZMP-SynqNet-PCI-RJ, may include onboard I/O expansion (e.g., 32 digital inputs and 32 digital outputs, plus analog channels) to further consolidate the control architecture.

Integration requires careful attention to host system compatibility and network topology. The card must be installed in a compatible 64-bit PCI slot, and the SynqNet network must be properly terminated to maintain signal integrity at high speeds. Configuration and programming are typically managed through Danaher Motion’s proprietary software suites, which provide tools for axis tuning, trajectory profiling, and network diagnostics.

ZMP-SYNQNET-PCI

ZMP-SYNQNET-PCI

ZMP-SYNQNET-PCI

ZMP-SYNQNET-PCI

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host System PC with available 64-bit Universal PCI slot Ensure the host operating system and BIOS support the specific PCI card revision.
Network Protocol SynqNet All connected drives and I/O nodes must be SynqNet-compatible.
Software Environment Danaher Motion / MEI motion control software suite Required for configuration, trajectory programming, and servo tuning.
Network Topology Daisy-chain or star with proper termination The SynqNet ring or line must be correctly terminated to prevent communication faults.
Power & Cooling Standard PCI slot power + adequate chassis ventilation High-performance processors generate heat; ensure adequate airflow in the host PC.

 

Dimensions, Mounting & Connection Notes

  • Form Factor: Standard full-length or half-length PCI card (depending on specific revision and heatsink configuration).
  • Mounting Method: Secured to the host PC chassis via the standard PCI bracket screw.
  • Network Connection: RJ-45 or specialized SynqNet connectors (variant dependent) for linking to the first node in the SynqNet network.
  • Installation Constraint: The host PC must be completely powered down and unplugged before installing or removing the card to prevent damage to the PCI bus or the card’s circuitry.
  • Environmental Limits: Designed for indoor industrial or commercial environments; host PC enclosure should meet standard IP20 or higher protection ratings.

 

FAQ

What is the ZMP-SYNQNET-PCI?
It is a 64-bit PCI motion controller card manufactured by Danaher Motion (MEI/Kollmorgen) that bridges a host PC to a SynqNet deterministic real-time motion control network.

Why is this product sometimes associated with Zygo?
While the ZMP-SYNQNET-PCI is a Danaher Motion product, it is occasionally listed in the same inventory catalogs as Zygo metrology components by broad-line industrial automation distributors.

How many axes can the ZMP-SYNQNET-PCI control?
The card supports coordinated motion control for up to 32 axes across a maximum of 34 SynqNet nodes.

What is the servo update rate of this controller?
It can achieve a servo update rate of up to 48 kHz when controlling 4 axes, and up to 12 kHz when controlling 20 axes.

Does the card require a specific type of PCI slot?
Yes, it requires a 64-bit Universal PCI slot in the host computer to ensure sufficient bandwidth for real-time motion data transfer.

What software is needed to program the ZMP-SYNQNET-PCI?
Configuration and programming are performed using Danaher Motion’s dedicated motion control software suites, which provide tools for network setup, axis tuning, and trajectory generation.

 

Documented Performance Data

  • Maximum Axes: 32 axes
  • Maximum Nodes: 34 nodes
  • Servo Update Rate (4 Axes): Up to 48 kHz
  • Servo Update Rate (20 Axes): Up to 12 kHz
  • Bus Interface: 64-bit Universal PCI
  • Processor: High-performance embedded architecture (e.g., 466 MHz PowerPC)