Sale!

Delta Tau ACC-8E PMAC-2 2-Axis Analog Interface Board

Parameter Specification
Manufacturer Delta Tau Data Systems
Model ACC-8E / ACC8E / PMAC-2 ACC8E
Assembly Reference 602469 series
Product Type 2-axis analog servo interface / breakout board
Compatible Controllers PMAC2 family
Axes Supported 2
DAC Outputs Two optically isolated 18-bit DACs per axis
Encoder Inputs Differential 3-channel (A/B/C) per axis
Amplifier Enable Dry-contact relay per axis
Amplifier Fault Input Optically isolated per axis
Flag Inputs Four optically isolated 12–24 V (sinking/sourcing) per axis
Connection to Controller Single 100-pin high-density flat cable
Field Wiring Modular removable terminal blocks or IDC headers
Mounting Option DIN-rail (Option-1)
Categories: , , , , SKU: ACC-8E Brand:

Description

Core Product Summary

The Delta Tau ACC-8E (also referenced as PMAC-2 ACC8E or ACC8E) is a two-axis analog interface and breakout board designed for the PMAC2 family of Programmable Multi-Axis Controllers. It converts the high-density digital machine interface signals from a PMAC2 into practical analog drive, encoder, and flag connections suitable for industrial amplifiers and feedback devices.

The board supports velocity-mode, torque-mode, or dual-analog sinusoidal-commutation amplifiers. It provides optically isolated 18-bit DACs, differential encoder inputs, amplifier-enable relays, fault inputs, and 12–24 V flag interfaces, all accessible through modular terminal blocks or IDC headers. A single 100-pin flat cable connects the ACC-8E to the corresponding PMAC2 axis interface port.

Key Technical Specifications

Parameter Specification
Manufacturer Delta Tau Data Systems
Model ACC-8E / ACC8E / PMAC-2 ACC8E
Assembly Reference 602469 series
Product Type 2-axis analog servo interface / breakout board
Compatible Controllers PMAC2 family
Axes Supported 2
DAC Outputs Two optically isolated 18-bit DACs per axis
Encoder Inputs Differential 3-channel (A/B/C) per axis
Amplifier Enable Dry-contact relay per axis
Amplifier Fault Input Optically isolated per axis
Flag Inputs Four optically isolated 12–24 V (sinking/sourcing) per axis
Connection to Controller Single 100-pin high-density flat cable
Field Wiring Modular removable terminal blocks or IDC headers
Mounting Option DIN-rail (Option-1)

Engineering Selection Highlights

  • Required when interfacing PMAC2 controllers to analog ±10 V velocity, torque, or dual-analog sinusoidal amplifiers.
  • Supplies two independent 18-bit DAC channels per axis, enabling both single-command and dual-command (sine-wave) drive modes.
  • Provides full isolation on DAC outputs, fault inputs, and flag inputs, improving noise immunity in industrial environments.
  • Includes dry-contact relay amplifier-enable outputs configurable for normally-open or normally-closed operation.
  • Accepts differential or single-ended quadrature encoder feedback with index channel.
  • Uses modular terminal blocks for straightforward field wiring of power, signals, and feedback.
  • Occupies one machine interface port on the PMAC2, supporting two axes per board.
PMAC-2 ACC8E

PMAC-2 ACC8E

PMAC-2 ACC8E

PMAC-2 ACC8E

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host controller PMAC2 family (standard, not Ultralite without additional hardware) Connects via 100-pin JMACH-style port
Drive type Analog ±10 V velocity, torque, or dual-analog sinusoidal Digital PWM or pure pulse-and-direction drives use different ACC-8x boards
Encoder feedback Differential or single-ended 3-channel quadrature Index (C) channel supported
Flag / limit voltages 12–24 V sinking or sourcing Optically isolated
Cabling 100-pin high-density flat cable to PMAC2 One cable per ACC-8E
Mounting Panel or DIN-rail (with Option-1) Confirm available rail or panel space

Dimensions, Mounting & Connection Notes

The ACC-8E is a compact breakout-style board intended for DIN-rail or panel mounting. Primary field connections are made through modular removable terminal blocks. Alternative IDC header connections are available for flat-cable routing. The board receives its logic interface from the PMAC2 via a single 100-pin high-density connector; no separate processor or power supply is required beyond the signals and power provided by the controller port and external field supplies for flags and amplifiers.

Applications & System Role

The ACC-8E serves as the physical interface layer between a PMAC2 motion controller and analog servo amplifiers plus associated feedback and limit devices. In the control architecture it sits between the high-density digital machine port of the PMAC2 and the individual axis drives, encoders, and machine flags. Typical use is in multi-axis machines that employ conventional analog servo amplifiers rather than direct-PWM or digital network drives.

Detailed Product Overview

The Delta Tau ACC-8E is a purpose-designed two-axis analog interface board for the PMAC2 series of motion controllers. PMAC2 controllers generate high-density digital command and feedback signals on their machine interface ports. These signals are not intended for direct connection to industrial amplifiers or encoders; the ACC-8E performs the necessary conversion, isolation, and breakout functions.

For each of the two axes the board provides a pair of optically isolated 18-bit digital-to-analog converters. This arrangement supports both conventional single-analog-command amplifiers (velocity or torque mode) and dual-analog-command amplifiers used for sinusoidal commutation. Amplifier enable is handled by dry-contact relays that can be wired in normally-open or normally-closed configurations. Amplifier fault inputs pass through optical isolators, accepting 12–24 V signals in either sinking or sourcing polarity.

Encoder feedback is accepted as differential or single-ended three-channel quadrature signals (A, B, and index). Four additional optically isolated flag inputs per axis accommodate positive and negative over-travel limits, home switches, and user-defined signals, again supporting 12–24 V sinking or sourcing devices.

All primary field connections are brought out to modular terminal blocks, simplifying installation and maintenance. On-board IDC headers offer an alternative for systems that prefer flat-cable distribution. The board itself mounts on a DIN rail when Option-1 is fitted, or can be secured to a panel. A single 100-pin flat cable links the ACC-8E to the corresponding axis interface port on the PMAC2 controller.

Selection of the ACC-8E is appropriate whenever a PMAC2 system must drive analog ±10 V amplifiers and requires clean isolation between the controller and the machine. Complementary boards in the ACC-8 family (ACC-8F for direct PWM, ACC-8S for pulse-and-direction) address other amplifier interface styles. Confirmation of the exact PMAC2 port assignment and amplifier command type remains the primary integration step.

FAQ

What is the Delta Tau ACC-8E?
It is a two-axis analog interface and breakout board for PMAC2 motion controllers that provides isolated DAC outputs, encoder inputs, amplifier enables, and flag interfaces.

Which controllers does the ACC-8E work with?
It is designed for the PMAC2 family of Programmable Multi-Axis Controllers.

How many axes does one ACC-8E support?
Each board supports two axes.

What type of amplifiers can be connected?
Analog ±10 V velocity-mode, torque-mode, or dual-analog sinusoidal-commutation amplifiers.

How does the ACC-8E connect to the PMAC2?
Via a single 100-pin high-density flat cable to the controller’s machine interface port.

What encoder signals does it accept?
Differential or single-ended three-channel quadrature encoder feedback including the index channel.

Are the signal interfaces isolated?
Yes. DAC outputs, amplifier fault inputs, and flag inputs are optically isolated.