Description
Core Product Summary
The ELAU SR-05860005P021S1B0T is a compact permanent-magnet AC synchronous servo motor from the PacDrive SR series. It belongs to the SR-058 frame size family and is designed for precise position, speed, and torque control in automated machinery.
This model provides 0.4 Nm standstill torque, a rated speed of 6000 rpm, and a peak torque of 2.15 Nm. It operates from a 230 VAC supply, incorporates PTC thermal protection, and is configured with a smooth shaft and without a holding brake. The motor is intended for integration into ELAU PacDrive systems using compatible servo amplifiers and controllers.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product type | AC synchronous servo motor (PacDrive SR series) |
| Frame / flange size | SR-058 (58 mm) |
| Standstill torque (M0) | 0.4 Nm |
| Peak torque | 2.15 Nm |
| Rated speed | 6000 rpm |
| Rated voltage | 230 VAC |
| Maximum current (Imax) | 13 A |
| Torque constant (Km) | 0.16 Nm/A |
| Thermal protection | PTC |
| Protection class | IP65 (series typical IP64/IP65) |
| Shaft version | Smooth (P0) |
| Brake | None (B0) |
| Feedback / connector code | 21 / S1 |
Detailed Product Overview
The ELAU SR-05860005P021S1B0T is a low-inertia permanent-magnet synchronous servo motor developed for high-dynamic positioning tasks within the PacDrive automation architecture. The SR series was engineered for packaging, printing, and other cyclic machinery that requires rapid acceleration, precise synchronization, and compact mechanical integration.
With a continuous standstill torque of 0.4 Nm and a peak torque capability of 2.15 Nm, the motor is sized for light-to-medium loads where high speed is prioritized. The 6000 rpm rated speed supports short cycle times typical of packaging and assembly applications. The low rotor inertia inherent to the SR design improves acceleration response and reduces energy consumption during frequent start-stop operation.
The motor is supplied for 230 VAC operation and includes a PTC thermistor for stator temperature monitoring. Feedback is provided via the coded interface (21/S1), enabling closed-loop control when connected to compatible PacDrive servo amplifiers. The smooth-shaft (P0) and brake-less (B0) configuration simplifies mechanical coupling in applications that do not require holding torque at standstill.
System integration occurs through ELAU PacDrive controllers and MC-series amplifiers. Correct matching of motor parameters, cable sets, and amplifier current rating is required for proper commutation and thermal protection. The compact 58 mm flange allows installation in space-constrained machine modules while maintaining standardized mounting interfaces.
Dimensions, Mounting & Connection Notes
The motor uses a standardized 58 mm flange for mounting. Orientation follows conventional IM B5 / IM V1 / IM V3 conventions common to the SR series. Electrical connection is made via the coded connector set corresponding to the S1 designation; motor power and feedback cables must be the matching ELAU-specified types. PTC thermal sensor leads are brought out for connection to the servo amplifier. Exact overall length, shaft diameter, and connector rotation details should be confirmed against the motor nameplate and the SR-Motor operating manual for the specific revision.

SR-05860005P021S1B0T

SR-05860005P021S1B0T
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| System family | ELAU PacDrive (SR series motors) | Designed for PacDrive motion architecture |
| Servo amplifiers | Compatible MC-4 series and related PacDrive drives | Amplifier current rating must match motor Imax |
| Controllers | PacDrive C-series, MAX, and equivalent controllers | Parameterization via EPAS or equivalent engineering software |
| Feedback interface | Coded 21 / S1 configuration | Use matching encoder/feedback cable |
| Power supply | 230 VAC | Confirm amplifier DC-bus compatibility |
| Thermal monitoring | PTC thermistor | Connect to amplifier thermal input |
| Shaft / brake | Smooth shaft (P0), no holding brake (B0) | Suitable for applications without vertical holding requirement |
| Mechanical mounting | 58 mm flange | Standard flange mounting orientation |
FAQ
What is the ELAU SR-05860005P021S1B0T?
It is a compact AC synchronous servo motor from the ELAU PacDrive SR-058 series with 0.4 Nm standstill torque and 6000 rpm rated speed.
What are the key performance values?
Standstill torque 0.4 Nm, peak torque 2.15 Nm, rated speed 6000 rpm, maximum current 13 A, torque constant 0.16 Nm/A, rated voltage 230 VAC.
Does this motor include a holding brake?
No. The B0 code indicates the motor is supplied without a holding brake.
What shaft version is fitted?
The P0 code specifies a smooth shaft (no keyway).
Which systems is it intended for?
It is designed for integration into ELAU PacDrive architectures using compatible servo amplifiers (such as MC-4 series) and controllers.
What thermal protection is provided?
A PTC thermistor is fitted in the stator for temperature monitoring by the connected servo amplifier.
What protection class applies?
The motor carries an IP65 rating consistent with the SR series documentation.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626