Description
Key Technical Specifications
- Part Number: KJ4001X1-CJ1 (alternate ordering codes: 12P1902X062, D803007X012, ATEX261)
- Product Type: 32-Channel Terminal Block for DeltaV DCS
- Number of Channels: 32
- Voltage Rating: 30 VDC
- Current Rating: 1 A maximum
- Terminal Type: Screw-clamp terminals
- Wire Size Supported: 16–24 AWG (typical)
- Supported Signal Types: Discrete input/output, analog input/output (depends on paired I/O card)
- Wiring Configuration: Supports 2-wire, 3-wire, or 4-wire I/O depending on card and application
- Ambient Temperature Range: −40 °C to +70 °C
- Storage Temperature Range: −40 °C to +85 °C
- Relative Humidity: 5 to 95% non-condensing
- Airborne Contaminants: ISA-S71.04–1985 Class G3
- Shock: 10 g half-sine wave for 11 ms
- Vibration: 1 mm p-p (2–13.2 Hz); 0.7 g (13.2–150 Hz)
- Protection Rating: IP20
- Insulation Resistance: >100 MΩ @ 500 V DC
- Flame Retardancy: UL94 V-0
- Dimensions (L × W × H): ~110 × 100 × 30 mm
- Weight: ~0.3 kg (net)
- Mounting: DIN rail or panel mount
- Hazardous Area Ratings: II 3G Ex ec IIC Gc; FM18ATEX0076U; IECEx FMG 18.0030U; FM21UKEX0199U; CL I Div 2 GP A,B,C,D; CL I Zone 2 AEx/Ex ec IIC T4 Gc; FM18US0277U; FM19CA0005U
- Removal/Insertion: Cannot be removed or inserted with system power energized
- Calibration: Not required; no user-serviceable parts
- Common Pairings: VE4002S1T2B5 (32-CH DO), VE4001S2T2B4 (32-CH DI), VE4003S2B1 (AI) in various configurations
Product Introduction
The Emerson KJ4001X1-CJ1 is a 32-channel terminal block for Emerson’s DeltaV™ DCS (and Ovation platforms), used to terminate field wiring for high-density discrete and analog I/O cards in M-Series, S-Series, and carrier-based architectures. It provides screw-clamp terminals for up to 32 channels, supporting 2-wire, 3-wire, or 4-wire I/O configurations depending on the paired I/O card (e.g., 32-CH discrete output, 32-CH discrete input, analog input).
This terminal block is chosen for its 30 VDC @ 1 A rating, wide temperature range (−40 to +70 °C), and hazardous-area certifications (Ex ec IIC Gc, Div 2, Zone 2), making it suitable for dense I/O panels in process plants where space and reliability matter. In the field, it shows up in VE4002S1T2B5 (32-CH DO), VE4001S2T2B4 (32-CH DI), and similar assemblies where multiple channels must be terminated in a compact footprint.

KJ4001X1-CJ1

KJ4001X1-CJ1
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| One or more channels dead | Loose terminal screw; broken wire strand; cold joint | ✅ High | Visually inspect terminals; gently tug-test wires; check for discoloration or arcing marks | Re-terminate affected channels; torque screws to spec; verify continuity to I/O card |
| Intermittent signal under vibration | Loose terminals or poor strain relief | ✅ High | Visually inspect terminals; gently tug-test wires; check for cracked insulation | Re-secure terminals; add cable clamps; verify DIN rail is solid |
| Channel reads wrong state (DI/DO) | Wiring error (swapped +/− or wrong terminal); open circuit; short to ground | ✅ High | Measure loop resistance and voltage at terminal block with multimeter; compare to expected values | Re-wire per OEM diagram; check for shorts or opens in field cable |
| Multiple channels fail simultaneously | I/O card failure; backplane issue; fused field power out | ❌ Medium (card/system) | Check I/O card status LEDs; measure field power at terminal block; review DeltaV diagnostics | Investigate I/O card health and field power distribution; terminal block rarely causes multi-channel failure alone |
| Noise on analog signal (if used for AI) | Ground loops; improper shielding; nearby VFD noise | ✅ Medium | Measure ground potential between panel and field device; check shield termination | Terminate shield at one end only; add isolated signal conditioner if needed |
If you’re stuck, pull a photo of the wiring at the terminal block, a screenshot of the DeltaV I/O diagnostics, and a multimeter reading of loop resistance/voltage, then send those to support.
Frequently Asked Questions (FAQ)
Q: Is the KJ4001X1-CJ1 hot-swappable?
A: No. Emerson explicitly states this unit cannot be removed or inserted with system power energized. Plan a short maintenance window and follow LOTO.
Q: What signal types does this terminal block support?
A: It supports discrete input/output and analog input/output signals, depending on the paired I/O card (e.g., 32-CH DO, 32-CH DI, AI).
Q: Is this new or refurbished?
A: We supply this as New Original / New Surplus unless otherwise noted. Factory packaging may vary by lot; traceability is maintained via OEM labels and packing docs.
Q: What I/O cards does this pair with?
A: Commonly paired with VE4002S1T2B5 (32-CH DO), VE4001S2T2B4 (32-CH DI), VE4003S2B1 (AI), and similar M/S-Series or carrier-based I/O assemblies.
Q: What’s the lead time?
A: Typical ship time is 3–5 working days from stock. If you need a specific delivery date, tell us up front so we can stage it.
Q: What warranty do you offer?
A: 1-year warranty against DOA and functional defects. We’ll replace or refund if it fails under normal use within that period.
Q: Why is this cheaper than buying direct from Emerson?
A: This is surplus channel stock — genuine OEM hardware, but sourced via secondary distribution. Same part number, often with original factory labels and packaging.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626