Description
Key Technical Specifications
- Part Number: KJ4002X1-BA1 (alternate ordering codes: VE4055S1C0, 12P1727X042)
- Product Type: Left 8-Wide Vertical Carrier for DeltaV M-Series
- Module Capacity: 8 vertical DeltaV modules (I/O cards, controllers, etc.)
- Mounting: DIN rail (vertical orientation)
- Backplane: DeltaV-compatible power and data bus connections
- Power Distribution: LocalBus circuit power via backplane; extender cables support up to 12.6 VDC at 15 A
- Ambient Temperature Range: 0 °C to 60 °C (per carrier documentation); −40 to +70 °C for associated extender cables
- Relative Humidity: 5 to 95% non-condensing
- Airborne Contaminants: ISA-S71.04–1985 Class G3
- Shock: 10 g half-sine wave for 11 ms
- Vibration: 1 mm peak-to-peak (5–16 Hz); 0.5 g (16–150 Hz)
- Protection Rating: IP20
- Dimensions (L × W × H): ~508 × 203 × 102 mm
- Weight: ~0.32 kg (net)
- Configuration: Left-side vertical carrier (KJ4002X1-BB1 is the right-side variant)
- Compatible Modules: DeltaV M-Series vertical modules (analog, discrete, thermocouple, RTD, serial, Fieldbus, etc.)
- Optional Terminal Blocks: 16-pin mass termination (2-wire), 24-pin mass termination (4-wire), fused I/O blocks
- Certifications: CE, UL, CSA; ATEX/IECEx when used in certified assemblies
Product Introduction
The Emerson KJ4002X1-BA1 is a left-side 8-wide vertical carrier for Emerson’s DeltaV™ M-Series DCS, designed to mount up to eight vertical DeltaV modules on a DIN rail in a compact, space-efficient configuration. It provides the mechanical structure, backplane power distribution, and data bus connections required for M-Series I/O cards, controllers, and communication modules to operate as a cohesive assembly.
This carrier is chosen for legacy M-Series installations where vertical module density matters, and where left-side carrier positioning matches the original panel layout. In the field, it shows up in process control cabinets where multiple I/O channels must be consolidated into a single 8-slot vertical assembly, often paired with 16-pin or 24-pin mass termination blocks for field wiring.
Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| One or more modules not detected | Backplane contact issue; module not seated; carrier power fault | ✅ High | Check carrier power input; verify each module is fully seated; inspect backplane contacts for debris or damage | Reseat modules; clean backplane contacts; verify carrier power supply and fuses |
| Intermittent comms under vibration | Loose DIN rail mounting; module retention clips worn | ✅ High | Visually inspect DIN rail clips; gently tug-test modules; check for carrier movement | Re-secure DIN rail; replace worn retention clips; add additional mechanical support |
| Multiple modules fail simultaneously | Carrier backplane fault; power distribution issue; fused supply out | ❌ Medium (power/system) | Measure backplane voltage at multiple points; check carrier fuses; review DeltaV diagnostics | Investigate power supply and backplane integrity; carrier rarely causes isolated module failure |
| Module won’t physically seat | Wrong carrier orientation (left vs right); incompatible module type | ❌ Low (configuration) | Compare carrier model (KJ4002X1-BA1 vs BB1); verify module is M-Series vertical type | Use correct left/right carrier; ensure module matches M-Series vertical form factor |
| Backplane shorts or arcing | Damaged backplane pins; foreign object; module insertion with power on | ✅ High | Visually inspect backplane for bent pins, debris, or burn marks; check for module insertion damage | Replace carrier if backplane is damaged; always de-energize before module insertion/removal |
If you’re stuck, pull a photo of the carrier, module arrangement, backplane condition, and a screenshot of the DeltaV diagnostics, then send those to support.

KJ4002X1-BA1

KJ4002X1-BA1
Frequently Asked Questions (FAQ)
Q: Is the KJ4002X1-BA1 hot-swappable?
A: The carrier itself is not hot-swappable; modules may be hot-swappable depending on the specific DeltaV module type and system configuration. Follow Emerson’s module-specific procedures and site LOTO rules.
Q: What modules does this carrier support?
A: It supports DeltaV M-Series vertical modules (analog, discrete, thermocouple, RTD, serial, Fieldbus, etc.) in an 8-slot vertical configuration.
Q: Is this new or refurbished?
A: We supply this as New Original / New Surplus unless otherwise noted. Factory packaging may vary by lot; traceability is maintained via OEM labels and packing docs.
Q: What’s the difference between KJ4002X1-BA1 and KJ4002X1-BB1?
A: KJ4002X1-BA1 is the left-side 8-wide vertical carrier; KJ4002X1-BB1 is the right-side variant. Orientation matters for panel layout and cable routing.
Q: What terminal blocks pair with this carrier?
A: Optional terminal blocks include 16-pin mass termination (2-wire), 24-pin mass termination (4-wire), and fused I/O blocks, depending on the I/O card configuration.
Q: What’s the lead time?
A: Typical ship time is 3–5 working days from stock. If you need a specific delivery date, tell us up front so we can stage it.
Q: What warranty do you offer?
A: 1-year warranty against DOA and functional defects. We’ll replace or refund if it fails under normal use within that period.
Q: Why is this cheaper than buying direct from Emerson?
A: This is surplus channel stock — genuine OEM hardware, but sourced via secondary distribution. Same part number, often with original factory labels and packaging.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626