Sale!

Emerson SS4502 DeltaV CHARM Fused Injected-Power Terminal Block

The Emerson SS4502 — referenced interchangeably as SE4502, with order code KL4502X1-LA1 — is the Fused Injected-Power Terminal Block of the DeltaV CHARM electronic marshalling system. In a DeltaV CHARM installation, field wiring lands on CHARM terminal blocks, and the CHARM (Characterization Module) plugs directly onto the terminal block to characterize that channel for its signal type. The SS4502 variant adds a fused power injection path: it delivers a system-powered, fuse-protected field supply to the CHARM channels, so devices requiring an injected supply can be powered from the I/O system without a separate external power distribution.

Categories: , , , , SKU: SS4502 Brand:

Description

Core Product Summary

The Emerson SS4502 — referenced interchangeably as SE4502, with order code KL4502X1-LA1 — is the Fused Injected-Power Terminal Block of the DeltaV CHARM electronic marshalling system. In a DeltaV CHARM installation, field wiring lands on CHARM terminal blocks, and the CHARM (Characterization Module) plugs directly onto the terminal block to characterize that channel for its signal type. The SS4502 variant adds a fused power injection path: it delivers a system-powered, fuse-protected field supply to the CHARM channels, so devices requiring an injected supply can be powered from the I/O system without a separate external power distribution.

The block carries the hazardous-area certification for this function: ATEX and IECEx certification for Zone 2 (II 3G Ex ec IIC Gc), UKEx, and North American Class I Division 2 Groups A, B, C, D plus Class I Zone 2 recognition, allowing CHARM channels in those environments to receive injected power through a certified component. Emerson part number 12P5787 (with revision suffixes such as 12P5787X042 and 12P5787X082) identifies the assembly, and buyers should match both the SS4502/SE4502 reference and the order code when replacing units in an existing CHARM installation.

 

Key Technical Specifications

Parameter Value
Product type Fused Injected-Power Terminal Block for DeltaV CHARM electronic marshalling
System Emerson DeltaV, CHARM I/O (Characterization Module) system
Model references SS4502 / SE4502 (SE/SS4502), order code KL4502X1-LA1
Emerson assembly part number 12P5787 (revision suffixes such as X042, X082)
Function Injects a system-powered, fuse-protected field supply to CHARM channels; fused connection protects the power distribution to the CHARM
Mounting context CHARM terminal block positions within the DeltaV CHARM electronic marshalling architecture
Hazardous-area certification ATEX: II 3G Ex ec IIC Gc (FM19ATEX0173U); IECEx (FMG 19.0019U); UKEx (FM21UKEX0017U); Class I Division 2 Groups A, B, C, D (FM17US0286U); Class I Zone 2 AEx/Ex ec IIC Gc (FM17CA0145U)
Certified suitability Hazardous atmosphere Zone 2 / Division 2 installations, Group IIC gases
Companion terminal blocks in the CHARM range Standard CHARM terminal block (KL4502X1-BA1 / SE4501), CHARM address terminal block (KL4502X1-DA1), 3-wire AI fused injected-power terminal block (KL4502X1-TA1 / SE4511), relay output terminal block (KL4502X1-MA1)

 

Engineering Selection Highlights

  • The fused block is chosen when the CHARM channel needs injected power. The CHARM range separates standard terminal blocks from fused injected-power blocks; SS4502 is the fused variant, so the selection question is whether the channel design powers its field device from the I/O system — if yes, this is the correct block type for that channel position.
  • The fuse is engineered into the power path. Because the field supply is fed through an integral fused connection, a short or overload on the injected power wiring is contained at the terminal block instead of propagating into the CHARM I/O card or the system power bus — the failure is limited to the affected channel.
  • Hazardous-area scope is defined per channel position. The block’s ATEX/IECEx Zone 2 (Ex ec IIC Gc) and Class I Division 2 certifications mean CHARM channels with injected power can be installed in Zone 2 / Division 2 areas; verify that the CHARM and the overall installation are covered by the same certified configuration.
  • Match the full ordering reference, not just the series. SS4502 units circulate under several references (SE4502, SE/SS4502, KL4502X1-LA1, 12P5787X0xx revisions); replacements should match the order code and assembly revision against the installed hardware.
  • The block is one element of the CHARM architecture. Electronic marshalling assigns signal characterization to the CHARM that plugs onto the block; the terminal block family includes standard, address, fused injected-power and relay output variants, so channel-by-channel selection is part of the I/O design.
  • Installation is part of the system’s modularity. As a CHARM terminal block, it belongs to the DeltaV electronic marshalling layer where field wiring and I/O characterization are separated — which is why the block, not the controller cabinet, is the item that gets replaced or reconfigured when a channel changes.

 

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Host system DeltaV CHARM electronic marshalling (CHARM I/O) Field wiring lands on the terminal block; the CHARM plugs onto it to characterize the channel
Channel power design System-powered, fuse-protected injected field supply Selected for channel positions where the field device is powered from the I/O system
Order code -LA1; model references / SE4502 / SE/ Match the order code and the 12P5787 assembly revision when replacing
CHARM compatibility Operates with the CHARM modules of the DeltaV CHARM system The specific CHARM type for a channel is a separate selection from the terminal block
Related terminal blocks Standard block KL4502X1-BA1 (SE4501); address block KL4502X1-DA1; 3-wire AI fused injected-power block KL4502X1-TA1 (SE4511); relay output block KL4502X1-MA1 Do not substitute block types — each is wired for a different channel function
Hazardous-area installation ATEX/IECEx/UKEx Zone 2 and Class I Division 2 (Groups A–D), Ex ec IIC Gc Installation must follow the certified configuration and the system’s hazardous-area documentation
SS4502

SS4502

SS4502

SS4502

Detailed Product Overview

Electronic marshalling changed what a terminal block does. In a conventional DeltaV or any traditional DCS I/O design, the terminal strip is a passive wiring accessory — its job ends at conducting field wires to the marshalling path, and signal type is fixed by the I/O card. In the CHARM system, the terminal block becomes a functional part of the I/O: it carries the field wiring, hosts the pluggable CHARM that characterizes the channel, and — in the fused injected-power variant — carries the system power that runs the field device.

That last duty is what defines the SS4502. Powering field devices from the I/O system is standard practice; two-wire transmitters, for example, take loop power from the analog input channel. But injecting power into field wiring creates a protection requirement: a field-side short or a damaged cable could draw fault current through the I/O. The fused injected-power block answers this with the fuse built into the block’s power path, so overcurrent is interrupted at the terminal — protecting the channel and limiting the fault to one position rather than the system power distribution.

The certification scope is the other half of the product’s identity. The block carries a coherent set of hazardous-area approvals: ATEX and IECEx certification for Zone 2 with Ex ec IIC Gc marking, the corresponding UKEx recognition, and North American Class I Division 2 Groups A–D plus Class I Zone 2 approval. This is not incidental — it is what makes a CHARM channel with injected power installable in the classified instrument areas where most process plants have field devices. The certification basis should still be applied at system level: the hazardous-area suitability of an installation depends on the complete channel configuration and its installation documentation, not on one component’s certificate.

For identification in service and procurement, the SS4502 carries multiple referencing layers that buyers must reconcile: the model reference (SS4502, also listed as SE4502 or SE/SS4502), the order code (KL4502X1-LA1), and the Emerson assembly part number 12P5787 with its revision suffixes (e.g., X042, X082). In the CHARM terminal block family these references distinguish functionally different products — the standard block is SE4501 (KL4502X1-BA1), the address block is KL4502X1-DA1, the 3-wire analog input fused block is SE4511 (KL4502X1-TA1), and relay output blocks carry their own codes. Ordering a fused injected-power block by a partial reference risks receiving a standard block, which would leave the channel without its injected power path.

Selection and maintenance follow the CHARM philosophy: the terminal block is a per-channel item. When a channel changes signal type or a block is damaged, the affected position is reworked without disturbing the rest of the marshalling panel. For a buyer holding spares for a DeltaV CHARM installation, the correct strategy is to stock the fused injected-power block in proportion to the number of system-powered channels in the I/O design, and to verify each replacement against the order code and revision of the installed hardware.

 

Applications & System Role

The SS4502 sits in the marshalling layer of a DeltaV control system — the point where field wiring from the plant meets the I/O system. Traditional marshalling routes each field signal through terminal strips and cross-wiring to I/O cards fixed in one location. DeltaV CHARM electronic marshalling replaces that: field wiring terminates on CHARM terminal blocks, and a pluggable CHARM characterizes each channel for its signal type, allowing the I/O to be reconfigured channel by channel.

Within that architecture, the SS4502 is the terminal block variant that carries power into the channel. A substantial share of field devices — two-wire transmitters, discrete output loads, and other power-consuming devices — draw their operating power from the I/O system. The fused injected-power block feeds that supply onto the channel through an integral fuse, so the power comes from the system, passes a protective element at the terminal, and reaches the CHARM and field device along the channel wiring.

The block’s hazardous-area certification extends this function into classified areas. Process units in refineries, chemical plants and similar facilities routinely have instrument locations classified as Zone 2 or Class I Division 2; a CHARM channel serving such a location must be built from certified components, and the SS4502 carries that certification for the injected-power path (Ex ec IIC Gc scope, Groups A–D). For the engineering team, the block is one element of the certified channel assembly: field wiring, terminal block, CHARM and I/O card together form the installation whose suitability is assessed.

 

FAQ

What is the Emerson SS4502?
It is the Fused Injected-Power Terminal Block of the DeltaV CHARM electronic marshalling system, referenced as SE4502 / SE/SS4502 with order code KL4502X1-LA1 and Emerson assembly part number 12P5787.

What does the SS4502 do?
It terminates the field wiring for its CHARM channel and injects a system-powered, fuse-protected field supply to the channel, so field devices that draw power from the I/O system are fed through an integral protective fuse.

Why is the fuse important?
The integral fuse contains overcurrent faults — such as a field-side short — at the terminal block, protecting the CHARM channel and the system power distribution instead of letting the fault propagate into the I/O.

Which system does SS4502 belong to?
The Emerson DeltaV CHARM I/O (electronic marshalling) system, where field wiring lands on CHARM terminal blocks and pluggable CHARMs characterize each channel for its signal type.

What certifications does SS4502 hold?
ATEX and IECEx Zone 2 certification (II 3G Ex ec IIC Gc), UKEx recognition, and Class I Division 2 Groups A, B, C, D plus Class I Zone 2 (AEx/Ex ec IIC Gc) approvals for hazardous-atmosphere installations.

Which part numbers refer to this block?
SS4502, SE4502 and the SE/SS4502 designation all reference the same product; the order code is KL4502X1-LA1 and the Emerson assembly part number is 12P5787 with revision suffixes such as X042 or X082.

What is the difference between SS4502 and other CHARM terminal blocks?
The CHARM range includes the standard terminal block (SE4501, KL4502X1-BA1), the CHARM address terminal block (KL4502X1-DA1), the 3-wire analog input fused injected-power block (SE4511, KL4502X1-TA1) and relay output blocks; SS4502 is specifically the fused injected-power variant, and the block types are not interchangeable.

How should I verify a replacement SS4502?
Match the order code KL4502X1-LA1, the model reference and the 12P5787 assembly revision against the installed hardware, and confirm the channel position requires the fused injected-power block before installation.