Sale!

Emerson VE4002S1T2B5 DeltaV 32-Channel 24 VDC High-Side Discrete Output Card

Parameter Specification
Manufacturer Emerson
Model / order number VE4002S1T2B5
Product type Discrete output (DO) card
Control system family Emerson DeltaV traditional I/O
Number of output channels 32
Output configuration 24 V DC, high-side switching
Output rating 100 mA continuous per channel
Output range 24 V DC ±10%
Off-state leakage 0.1 mA maximum
Categories: , , , , SKU: VE4002S1T2B5 Brand:

Description

Core Product Summary

The Emerson VE4002S1T2B5 is a DeltaV discrete output card that provides 32 channels of 24 V DC high-side switching for field devices such as solenoid valves, interposing relays, and status indicators. It belongs to Emerson’s DeltaV traditional I/O architecture and is supplied with a standard I/O termination block for field wiring.

Each channel switches the positive leg of a 24 V DC field circuit and is optically isolated from the control system. The card draws its logic power from the DeltaV LocalBus and requires a compatible DeltaV I/O interface carrier, controller, and matching 32-channel DO termination block. Its high-density channel count makes it suitable when a controller cabinet must drive a large number of low-current discrete loads without adding separate interposing output hardware.

 

Key Technical Specifications

Parameter Specification
Manufacturer Emerson
Model / order number VE4002S1T2B5
Product type Discrete output (DO) card
Control system family Emerson DeltaV traditional I/O
Number of output channels 32
Output configuration 24 V DC, high-side switching
Output rating 100 mA continuous per channel
Output range 24 V DC ±10%
Off-state leakage 0.1 mA maximum
LocalBus current 100 mA typical; 150 mA maximum at 12 V DC nominal
Field circuit power per card 3.2 A at 24 V DC (+20% / -15%)
Isolation Each channel optically isolated from the system; factory tested to 1500 V DC
Terminal block Standard 32-screw I/O termination block
Operating temperature -40 to 70°C (-40 to 158°F)
Storage temperature -40 to 85°C (-40 to 185°F)
Relative humidity 5 to 95%, non-condensing
Protection rating IP20
Card dimensions 10.7 cm H × 4.1 cm W × 10.5 cm D
Conformal coating ISA-S71.04-1985 Class G3

 

Detailed Product Overview

The VE4002S1T2B5 converts discrete commands from a DeltaV controller into 24 V DC high-side outputs. Because it switches the positive leg of each field circuit, no current flows in the field wiring when an output is off; this can simplify troubleshooting and reduce unintended energization of loads during an output-off condition.

With 32 output channels on one card, the module is intended for applications that require many low-current digital outputs in a compact I/O footprint. Typical loads include solenoid-operated valves, relay coils, and panel indicators, provided each channel load remains within the 100 mA per-channel rating and the complete card remains within its 3.2 A field-circuit power limit.

Each output channel is optically isolated from the DeltaV system and is factory tested at 1500 V DC. This isolation separates the controller-side logic from the field-side switching circuit, which is important when field wiring, power distribution, and control-system grounding are designed as separate electrical domains.

The card uses the DeltaV LocalBus for communication and internal power. It must be installed in a compatible DeltaV I/O interface carrier together with the correct keyed 32-channel DO termination block. The keyed interface helps ensure that the output card is installed only in a termination block intended for its function, reducing the risk of mismatched field wiring during maintenance or replacement.

The VE4002S1T2B5 is a simplex discrete output interface. It should be selected where the required load current per point is modest and where high-side 24 V DC switching matches the field-device wiring design. Loads requiring higher current, isolated channels, AC switching, or per-channel fusing require a different DeltaV DO card and terminal-block configuration.

VE4002S1T2B5

VE4002S1T2B5

VE4002S1T2B5

VE4002S1T2B5

System Compatibility & Integration Requirements

Item / Dependency Verified Compatibility or Requirement Practical Note
Control system Emerson DeltaV distributed control system The card is part of the DeltaV traditional I/O subsystem.
I/O architecture DeltaV traditional I/O interface The card plugs into a compatible DeltaV I/O interface carrier.
Controller DeltaV controller supporting the installed traditional I/O subsystem Controller and I/O subsystem must be configured in the DeltaV engineering environment.
Carrier DeltaV I/O interface carrier The card and terminal block mount in the carrier slot arrangement.
Terminal block Standard 32-screw DO I/O termination block The card and terminal block are keyed as a matched I/O interface.
Field power 24 V DC field circuit power, 3.2 A maximum per card Field supply must accommodate the connected load and card-level limit.
LocalBus power 12 V DC nominal; 100 mA typical, 150 mA maximum Supplied through the DeltaV I/O interface carrier.
Field wiring High-side 24 V DC output circuits Each channel is limited to 100 mA.
Software DeltaV system software supporting the installed I/O hardware The I/O card and channels must be assigned and configured in DeltaV Explorer.

 

Dimensions, Mounting & Connection Notes

  • Card size: 10.7 cm high × 4.1 cm wide × 10.5 cm deep.
  • Mounting: Inserts into a compatible DeltaV traditional I/O interface carrier.
  • Field connection: Uses a standard 32-screw I/O termination block.
  • Interface keying: The card and terminal block use DeltaV I/O function keying to prevent installation of an incompatible card in a terminal block.
  • Environmental installation limits: -40 to 70°C operating temperature, 5 to 95% non-condensing relative humidity, and IP20 protection.
  • Environmental protection: Conformal coating meeting ISA-S71.04-1985 Class G3 airborne-contaminant requirements.
  • Mechanical environment: 10 g half-sine shock for 11 ms; 1 mm peak-to-peak vibration from 5 to 16 Hz and 0.5 g from 16 to 150 Hz.

 

FAQ

What is the Emerson VE4002S1T2B5?
It is an Emerson DeltaV discrete output card with 32 channels of 24 V DC high-side switching and a standard I/O termination block.

How many outputs does the VE4002S1T2B5 provide?
It provides 32 discrete output channels.

What type of output does it use?
It uses 24 V DC high-side switching, with a continuous rating of 100 mA per channel.

What field loads can it drive?
It is intended for low-current 24 V DC loads such as solenoid valves, interposing relays, and indicator lights, within the per-channel and card-level current limits.

What power does the card require?
It receives 12 V DC nominal LocalBus power from the DeltaV I/O interface carrier and requires 24 V DC field-circuit power for the outputs, with a card-level limit of 3.2 A.

Which terminal block does it require?
It requires the matching keyed standard 32-screw DO I/O termination block in the DeltaV traditional I/O interface.

Is each output isolated from the DeltaV system?
Yes. Each channel is optically isolated from the system and is factory tested to 1500 V DC.

What environmental limits apply?
The I/O interface is rated for -40 to 70°C operation, 5 to 95% non-condensing relative humidity, and IP20 protection.

 

Documented Performance Data

Metric Value / Range Operating condition
Output current 100 mA continuous per channel 24 V DC high-side output
Output voltage range 24 V DC ±10% Field output circuit
Off-state leakage 0.1 mA maximum Output off
Field circuit power 3.2 A maximum per card 24 V DC, +20% / -15% supply range
LocalBus current 100 mA typical; 150 mA maximum 12 V DC nominal LocalBus supply
Channel isolation 1500 V DC factory test Optical isolation between channel and system