Description
Core Product Summary (Brand / Model / Key Attributes)
The Emerson VE4022 is a PROFIBUS DP communication interface card designed for the DeltaV distributed control system. Operating within the DeltaV subsystem, this module connects DeltaV controllers directly to PROFIBUS DP field networks, enabling high-speed cyclic data exchange with remote I/O blocks, variable frequency drives, motor control centers (MCCs), and smart transmitters.
This module functions as a PROFIBUS DP master interface, supporting communication baud rates up to 12 Mbps over RS-485 physical media. Designed to mount on standard DeltaV I/O interface carriers, the VE4022 integrates seamlessly into the DeltaV engineering environment, allowing field device configuration via GSD files and providing advanced diagnostic capabilities across distributed industrial networks.
Key Technical Specifications
| Parameter | Specification |
| Manufacturer | Emerson |
| Model / Part Number | VE4022 |
| System Family | DeltaV Traditional I/O / Subsystem Interface |
| Module Type | PROFIBUS DP Master Communication Interface Card |
| Network Protocol | PROFIBUS DP (Decentralized Peripherals) |
| Physical Layer | RS-485 |
| Transmission Speed | Up to 12 Mbps (auto-detect / configurable) |
| Device Capacity | Connects up to 125 field slave devices per network segment |
| Electrical Isolation | Galvanic isolation between network bus and backplane logic |
| Power Supply | Powered via DeltaV LocalBus backplane (12V DC nominal) |
| Operating Temperature Range | -40°C to +70°C (-40°F to +158°F) |
| Storage Temperature Range | -40°C to +85°C (-40°F to +185°F) |
| Relative Humidity | 5% to 95% non-condensing |
| Environmental Protection | IP20 rating; G3 conformal coating options available |
| Vibration / Shock | Conforms to standard DeltaV industrial mounting specifications |
Detailed Product Overview
The Emerson VE4022 PROFIBUS DP interface card expands the integration capabilities of the DeltaV process control system by providing a high-speed digital gateway to PROFIBUS DP field networks. By acting as a Class 1 PROFIBUS master, the card automatically handles cyclic I/O data transfers between connected field devices and the primary DeltaV controller, mapping field signals directly into controller memory blocks.
The card supports standard PROFIBUS GSD (General Station Description) file import within DeltaV Explorer, simplifying third-party device integration, signal mapping, and diagnostics. Onboard LED indicators display real-time network status, bus communication health, and device-level error conditions.
Logic power for internal processing is drawn directly from the DeltaV carrier backplane. Built-in galvanic isolation protects internal processing components from line noise, voltage surges, and ground loops across the fieldbus network cable. The housing includes mechanical keying features to ensure proper alignment and prevent insertion into incompatible carrier slots.

VE4022

VE4022
Engineering Selection Highlights
- High-Speed PROFIBUS DP Integration: Supports communication baud rates up to 12 Mbps for fast cyclic data updates from field drives and remote I/O.
- Broad Device Scalability: Interfaces with up to 125 PROFIBUS DP slave devices across network segments using standard RS-485 repeaters.
- GSD-Based System Integration: Directly imports standard vendor GSD files into DeltaV software for automatic signal tag creation and parameter setup.
- Galvanic Isolation Protection: Shields central DeltaV controllers from field-side electrical surges and ground potential variations.
- Hot-Swappable Module Design: Plugs into active DeltaV interface carriers without requiring system shutdown or disturbing adjacent control hardware.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
| Automation System | Emerson DeltaV DCS | Configured directly within DeltaV hardware trees |
| Subsystem Interface | DeltaV Carrier Backplane | Plugs into standard 2-wide or 8-wide I/O carriers |
| Terminal Block | PROFIBUS Interface Terminal Block | Requires dedicated serial/fieldbus terminal block for RS-485 wiring |
| Backplane Power | DeltaV LocalBus (12V DC) | Draws operating power directly from carrier backplane |
| Network Topology | PROFIBUS DP RS-485 Bus | Requires standard shielded twisted-pair PROFIBUS cable with active bus terminators |
| System Software | DeltaV Explorer / Control Studio | Configured using vendor-supplied GSD device descriptions |
Dimensions, Mounting & Connection Notes
- Height: 10.7 cm (4.2 in.)
- Width: 4.1 cm (1.6 in.)
- Depth: 10.5 cm (4.1 in.)
- Mounting Method: Direct snap-in mounting onto a DeltaV interface carrier fixed to standard T-section DIN rail (EN 50022).
- Clearance Requirements: Maintain standard vertical ventilation space above and below the carrier assembly to ensure proper convection cooling.
- Network Wiring: Connect PROFIBUS RS-485 lines using approved PROFIBUS connectors to the corresponding terminal block; ensure active bus termination is enabled at both ends of the physical cable segment.
- Shield Grounding: Ensure continuous cable shield grounding at the carrier grounding rail to maintain noise immunity across high-speed serial links.
FAQ
What is the Emerson VE4022?
The Emerson VE4022 is a PROFIBUS DP interface module for the DeltaV DCS, enabling high-speed digital communication between DeltaV controllers and PROFIBUS field devices.
What communication speeds does the VE4022 support?
The module supports PROFIBUS DP baud rates up to 12 Mbps over RS-485 network media.
How many devices can connect to a single VE4022 card?
The card can address up to 125 slave devices per network segment when using standard PROFIBUS segment repeaters.
How are third-party devices configured on the VE4022?
Field devices are integrated into DeltaV by importing the vendor’s standard GSD (General Station Description) file into DeltaV Explorer.
Does the VE4022 require an external power supply?
No, the card draws its operating logic power directly from the 12V DC LocalBus carrier backplane.
Verification & Troubleshooting Notes
- Status LED Inspection: Check the faceplate diagnostic LEDs upon powering up. A solid green light indicates healthy LocalBus backplane communication and active network operation. Red or flashing LEDs indicate bus communication errors, missing field termination, or configuration mismatches.
- Bus Termination Check: If communication errors or packet drops occur, verify that active PROFIBUS line terminators are powered and correctly engaged at both physical ends of the RS-485 network segment.
- GSD File Match: Ensure the imported GSD file revision in DeltaV Explorer exactly matches the hardware and firmware version of the connected field slave device.
- Carrier Seating Check: If the card fails to communicate on the backplane, disengage the retention latches, inspect the pin connectors, and firmly re-seat the card onto the carrier base.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626