Description
Core Product Summary
The EMG SV1-10483156 is a single-stage electro-hydraulic servo valve belonging to the SV1-10 series. It functions as a 4/3-way proportional valve that controls hydraulic volume flow in proportion to an electrical input signal at a constant pressure drop across the internal control edges.
The design uses an electromagnetic rotary drive with return springs. A shaft supported by needle roller bearings carries an electromagnetically driven rotor and rotary disc. The valve is spring-centred so that it returns to the neutral (zero) position on loss of power. It mounts on a standard ISO 4401 NG10 / Cetop 5 interface and is intended for high-precision hydraulic control applications.
Key Technical Specifications
| Parameter | Value / Description |
|---|---|
| Manufacturer | EMG Automation |
| Series | SV1-10 |
| Product type | Single-stage 4/3-way proportional electro-hydraulic servo valve |
| Nominal size | NG10 (DIN 24340) / ISO 4401 / Cetop 5 |
| Drive | Electromagnetic rotary drive with return springs |
| Hydraulic connection | ISO 4401 NG10 |
| Flow control | Proportional to electrical input signal |
| Centring | Spring-centred (returns to zero on power failure) |
| Typical family flow rates (at Δp = 20 bar) | 4 / 8 / 16 / 32 / 48 l/min (variant-dependent) |
| Operating pressure range (family) | 30…315 bar or 5…100 bar (variant-dependent) |
| Mounting | Standard subplate / manifold |
Engineering Selection Highlights
- Single-stage rotary-disc design with few moving parts supports long service life and relatively large control distances.
- Electromagnetic rotary drive with return springs provides proportional control and automatic return to neutral on power loss.
- ISO 4401 NG10 / Cetop 5 interface allows use of standard directional-valve mounting plates and manifolds.
- Spring-centred construction ensures a defined fail-safe position.
- The valve can be cleaned during operation by means of a service feature that flushes contaminants into the return line.
- Zero-position adjustment is possible via an external mechanical shaft accessible with a screwdriver.
- Suitable for systems requiring precise volume-flow control proportional to an electrical command signal.
System Compatibility & Integration Requirements
| Item / Dependency | Verified Compatibility or Requirement | Practical Note |
|---|---|---|
| Hydraulic interface | ISO 4401 NG10 / Cetop 5 | Compatible with standard NG10 subplates and manifolds |
| Drive type | Electromagnetic rotary with return springs | Requires matching electrical control current and connector |
| Fail-safe behaviour | Spring-centred to neutral | Returns to zero flow position on loss of electrical supply |
| Fluid compatibility | Hydraulic oil (specific media codes available in family) | Confirm fluid type (mineral oil, HFC, HFD, etc.) for the ordered variant |
| Cleaning / maintenance | In-service flushing capability | Cleaning bolt accessible for flushing impurities to tank |
| Zero adjustment | External mechanical shaft | Adjustable with screwdriver for zero-position setting |
Dimensions, Mounting & Connection Notes
The SV1-10 family valves measure approximately 127 × 72 × 264–325 mm (H × W × L) depending on the exact version and weigh approximately 6.5–7.5 kg. Mounting is by standard ISO 4401 NG10 pattern. Electrical connection is typically via a multi-pole industrial plug (family variants use DIN-style connectors). Exact outline drawings, mounting-hole positions, and connector pin-outs for the SV1-10483156 variant should be taken from the manufacturer’s documentation for the ordered configuration.
Detailed Product Overview
The EMG SV1-10483156 belongs to the SV1-10 family of single-stage electro-hydraulic servo valves. These valves employ a patented electromagnetic rotary drive acting on a rotary disc that meters flow through control edges. The disc is supported on a shaft running in needle roller bearings and is centred by pre-loaded springs. When control current is applied to the coils, a torque proportional to the current rotates the disc against the spring force, opening the control edges and producing a volume flow proportional to the input signal (at constant pressure drop).
Because the design contains few moving parts and maintains a relatively large clearance, frictional losses remain low and the valve tolerates a degree of fluid contamination better than many spool-type servo valves. Contaminants can be flushed into the return chamber during operation by momentarily operating a cleaning feature; the valve is then re-secured. Zero position can be trimmed mechanically via an external shaft accessible from the housing end face.
The valve mounts on a standard ISO 4401 NG10 interface, allowing direct replacement or integration with conventional NG10 manifolds and connecting plates. On loss of electrical power the return springs restore the disc to the neutral position, providing a defined fail-safe state.
Exact nominal flow, maximum operating pressure, overlap percentage and fluid compatibility code depend on the specific order configuration represented by the 10483156 identifier. Designers should confirm these parameters against the manufacturer’s data sheet for the exact part number before final system design.

SV1-10483156

SV1-10483156
Applications & System Role
The SV1-10483156 serves as a proportional directional control element in electro-hydraulic systems. It converts an electrical command into a precisely metered hydraulic flow, enabling closed-loop position, speed or force control of hydraulic actuators.
Typical system roles include:
- Precision motion control on industrial presses and forming machines
- Strip-guidance and material-handling hydraulics
- Test stands and laboratory hydraulic circuits requiring accurate flow modulation
- General industrial servo-hydraulic applications where single-stage proportional control is sufficient
The rotary-slide design is chosen when low friction, high repeatability and the ability to flush the valve during operation are required.
FAQ
What is the EMG SV1-10483156?
It is a single-stage 4/3-way proportional electro-hydraulic servo valve from the EMG SV1-10 series.
What is the nominal size of the SV1-10483156?
The valve uses the ISO 4401 NG10 / Cetop 5 / DIN 24340 size 10 interface.
How does the valve return to neutral?
It is spring-centred; the rotary disc returns to the zero-flow position when electrical power is removed.
Can the valve be cleaned while in service?
Yes. The design allows impurities to be flushed into the return line during operation by means of a dedicated cleaning feature.
What type of drive does the SV1-10 series use?
An electromagnetic rotary drive with return springs that produces torque proportional to the control current.
What mounting interface is required?
A standard ISO 4401 NG10 subplate or manifold.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626