WhatsApp: +86 16626708626
Email: 
Phone: +86 16626708626Description
3. Key Technical Specifications
| Parameter | Value |
|---|---|
| Ports | 24 x 10GBASE-X SFP+ |
| Additional | 4 x VSB via SFP+ (virtual switch bonding) |
| Module Class | S180 I/O-Fabric |
| Switching | High-performance distributed switching |
| Compatibility | S-Series chassis (S1A, S4, S6, S8) |
| Redundancy | Load sharing capable |
| Transceivers | Supports approved SFP+ modules |
| Management | Via chassis supervisor |
4. Product Introduction
The Enterasys SK8008-1224-F8 is an S180 class I/O-fabric module for the S-Series chassis. It delivers 24 ports of 10 Gigabit Ethernet via SFP+ with integrated fabric functionality for high-performance switching.
This module is commonly used in aggregation or core layers where dense 10GbE connectivity is required. It provides the port density and throughput needed for modernized legacy S-Series deployments.
- SK8008-1224-F8
5. Troubleshooting Quick Reference
| Symptom | Possible Cause | Relevance to this Part | Quick Check Method | Recommendation |
|---|---|---|---|---|
| Module not detected | Seating or chassis issue | ✅ High | Check module LEDs and “show module” | Reseat firmly and verify slot compatibility |
| No link on SFP+ ports | Transceiver or fiber problem | ✅ High | Run port status commands | Confirm compatible SFP+ and clean connectors |
| Fabric errors | Backplane or redundancy issue | ✅ High | Review fabric logs | Check for redundant fabric paths |
| High error counters | Optic or cable fault | ✅ Medium | Monitor interface statistics | Replace optic or cable |
| Module overheating | Airflow restriction | ✅ Medium | Check temperature readings | Ensure proper chassis cooling |
| Performance drop | Oversubscription | ❌ Low | Review traffic statistics | Balance load across multiple modules |
Contact technical support with chassis “show” commands and module logs if the issue is not resolved.
6. Frequently Asked Questions (FAQ)
Which chassis are compatible with the SK8008-1224-F8? It works in S-Series chassis including S1A, S4, S6, and S8 models. Verify specific slot requirements for your chassis.
Does this module support 10GbE on all ports simultaneously? Yes, it provides full 24-port 10GBASE-X capability with fabric integration for non-blocking performance.
Is this module still supported? The S-Series is a mature platform. Support is limited, but the hardware continues to perform in stable environments.
Is this New Surplus? Yes. Offered as New Original / New Surplus with functional verification where possible prior to shipment.
Can I mix this with other I/O modules? Yes, but best practice is to follow Enterasys guidelines for module combinations and software versions in the same chassis.
What warranty do you provide? We offer a 1-year hardware warranty on this New Surplus module. Test details and photos are available upon request before purchase.
