Description
Core Product Summary
The EPRO MMS3120/022-000 is identified with the MMS 3120 dual-channel bearing vibration transmitter platform, part of the MMS 3000 machinery monitoring system. It measures absolute bearing vibration through electrodynamic vibration transducers and converts the measured signals into analog current outputs for connection to external monitoring and control equipment.
The MMS 3120 supports two independent sensor inputs, configurable measurement ranges, vibration velocity and amplitude measurement, and limit supervision. Its design also includes redundant 24 VDC supply inputs and internal sensor and electronics supervision. These functions make the MMS 3120 relevant to machinery condition monitoring installations involving turbines, compressors, pumps, fans, and other rotating equipment.
Key Technical Specifications
| Parameter | Documented Specification |
|---|---|
| Manufacturer | EPRO |
| Product model | MMS3120/022-000 |
| Product family | MMS 3000 |
| Product type | Dual-channel bearing vibration transmitter |
| Measurement principle | Absolute bearing vibration measurement |
| Sensor inputs | 2 independent inputs |
| Sensor type | Electrodynamic vibration transducers |
| Sensor connection | Harting connectors |
| Supported sensor family | PR 9268 |
| Measurement variables | Vibration velocity and vibration amplitude |
| Velocity measuring ranges | 0–5, 10, 25, 50, 100 mm/s RMS |
| Amplitude measuring ranges | 0–25, 50, 100, 125, 250, 500 µm peak |
| Analog outputs | 0/4–20 mA |
| Analog output load | Less than 500 Ω |
| Additional test outputs | 2 |
| Buffered voltage output | ±10 V |
| Power supply | 18–36 VDC |
| Supply arrangement | 2 redundant 24 VDC inputs |
| Current consumption | Approximately 100 mA at 24 V |
| Power consumption | Approximately 2.5 W |
| Frequency range | 5/10–1000 Hz |
| Operating temperature | -20°C to +65°C |
| Storage and transport temperature | -30°C to +90°C |
| Protection rating | IP65 |
| Housing material | Non-corroding aluminum |
| Dimensions (W × H × D) | 127.5 × 125.75 × 80 mm |
| Net weight | Approximately 1.3 kg |
The numerical specifications above describe the documented MMS 3120 platform; they should not be treated as independently confirmed configuration data for every /022-000 unit.
Detailed Product Overview
Dual-channel vibration measurement
The EPRO MMS3120 is designed to process vibration signals from two independent electrodynamic transducers. Each channel measures bearing vibration and converts the input into an output proportional to vibration velocity, vibration amplitude, or a selected characteristic value.
The two-channel architecture allows engineers to monitor separate measurement points within a rotating machine. Alternatively, the channels can be combined to calculate the maximum value of the two inputs.
This configuration is useful when a machinery monitoring installation requires separate vibration measurements or a combined monitoring value.
Measurement configuration
The MMS 3120 provides selectable measurement ranges through DIP switches. The documented velocity ranges extend from 0–5 mm/s to 0–100 mm/s RMS, while the amplitude ranges cover 0–500 µm peak.
Measurement modes include single-channel and dual-channel operation. The selected configuration determines how the incoming signals are processed and represented at the outputs.
These settings should be matched to the installed transducers and the monitoring requirements of the machinery.
Analog signal processing
The transmitter provides two current outputs, with configurable 0/4–20 mA signal ranges. These outputs allow vibration measurement values to be transferred to external monitoring equipment.
Additional test outputs provide access to the dynamic input signals for analysis and diagnostic purposes. A buffered voltage output is also provided.
The analog outputs are specified as open-circuit and short-circuit proof, with a permissible load below 500 Ω.
Internal diagnostic functions
The MMS 3120 includes supervision functions for its internal electronics and connected sensors.
The diagnostic system monitors:
- Input signal conditions.
- Sensor cable continuity and short-circuit conditions.
- Supply voltage operating conditions.
- Internal electronic circuit status.
When a sensor or electronics fault is detected, the Channel Clear status changes and the corresponding 4–20 mA output indicates 0 mA.
This provides an additional diagnostic indication for maintenance personnel investigating abnormal machinery monitoring signals.
Machinery monitoring applications
The MMS 3120 platform is intended for machinery condition monitoring and protection installations involving:
- Steam and gas turbines.
- Industrial compressors.
- Centrifugal pumps.
- Industrial fans.
- Gearboxes.
- Other rotating machinery.
An important application boundary is that the documented transmitter is not designed for hazardous-area installation.

MMS3120/022-000
System Compatibility & Integration Requirements
| Integration Item | Documented Information |
|---|---|
| Monitoring platform | EPRO MMS 3000 |
| Sensor interface | Two electrodynamic transducer inputs |
| Sensor connections | Harting connectors |
| Sensor family | EPRO PR 9268 |
| Analog integration | 0/4–20 mA current outputs |
| Power integration | Redundant 24 VDC supply inputs |
| Diagnostic interface | Potential-free optocoupler outputs |
| Configuration | Jumpers and DIP switches |
Integration considerations
Before installing a replacement, engineers should compare the complete ordering designation, sensor connection arrangement, output configuration, measurement range, and alarm settings.
The availability of two independent channels does not mean that every installation uses the same operating mode. Existing configuration settings should be recorded before replacement.
Dimensions, Mounting & Connection Notes
| Parameter | Value |
|---|---|
| Width | 127.5 mm |
| Height | 125.75 mm |
| Depth | 80 mm |
| Net weight | Approximately 1.3 kg |
| Housing | Aluminum |
| Protection | IP65 |
Connection arrangement
- Two Harting sensor connectors.
- Two PG11 cable entries.
- Cage-clamp terminals for current outputs.
- Separate connections for supply, diagnostic signals, and alarm functions.
The preferred mounting orientation has the cable glands facing downward.
Installation and commissioning should be performed by trained personnel using the applicable equipment documentation.
FAQ
Q1: What is the EPRO MMS3120/022-000?
It is identified as an EPRO MMS 3120 dual-channel bearing vibration transmitter, associated with the MMS 3000 machinery monitoring platform.
Q2: What does the MMS3120 measure?
The MMS 3120 measures absolute bearing vibration using electrodynamic vibration transducers. Its measurement functions include vibration velocity and vibration amplitude.
Q3: How many sensor channels does the MMS3120 support?
The documented platform provides two independent sensor inputs, allowing separate or combined vibration measurement.
Q4: Which sensors are supported?
The documented MMS 3120 platform supports EPRO PR 9268 series electrodynamic vibration transducers, including PR 9268/20, /30, /60, and /70 variants.
Q5: What analog output does the MMS3120 provide?
It provides two current outputs with selectable 0/4–20 mA configurations. The documented permissible output load is below 500 Ω.
Q6: What power supply does the MMS3120 require?
The documented supply range is 18–36 VDC, with two redundant 24 VDC supply inputs.
Q7: Does the MMS3120 provide sensor fault diagnostics?
Yes. Its supervision functions monitor sensor signals, cable conditions, supply voltage, and internal electronic circuits.
Q8: Can the MMS3120 be installed in hazardous areas?
The documented MMS 3120 transmitter is not designed for hazardous-area use.

WhatsApp: +86 16626708626
Email:
Phone: +86 16626708626